Fungal pretreatment of wheat straw and its effect on the soda-AQ pulps

Nordic Pulp and Paper Research Journal

Volumn 24, Issue 2, 2009, Pages 193-198

  Fatehi, Pedram ^a   Ates, Saim ^b   Ni, Yonghao ^a  

^a UNIVERSITY OF NEW BRUNSWICK   (Canada)

^b KASTAMONU UNIVERSITY   (Turkey)

Author keywords

Biopulping; Bulk; CPVA; Fungal pretreatment; Paper strength; Wheat straw

Indexed keywords

BIOPULPING; DELIGNIFICATION; FUNGI; LUMINANCE; PAPER; POLYVINYL ALCOHOLS; PULP REFINING; STRAW; TENSILE STRENGTH;

BULK; CPVA; FUNGAL PRE TREATMENTS; PAPER STRENGTHS; WHEAT STRAWS;

PULP;

ADSORPTION; CARBOHYDRATES; DELIGNIFICATION; FUNGI; MECHANICAL PROPERTIES; PAPER; PULPS; REFINING; TENSILE STRENGTH; WHEAT STRAW;

EID: 68049124953     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2009-24-02-p193-198     Document Type: Article

References (50)

1. Abou-State, MA, El-Masry, A.M. and Mostafa, N.Y.S. (1988): Dissolving pulps from wheat straw by soda-anthraquinone pulping, Ind. Eng. Chem. Res. J. 27(1), 153.
2. Ahmed, A., Scott, G. M.,Akhtar, M. and Myers, G.C. (1998): Biokraft pulping of kenaf and its bleachability. In: North American Nonwood Fiber Symposium, Tappi Press, Atlanta, GA, pp. 231 -238.
3. Akhtar, M., Attridge, M.C., Blanchette, R., Myers, G., Wall, M.B., Sykes, M., Koning, J.W., Burges, I, Wegner, T. and Kirk, T.K. (1992): The white rot fungus Ceriporiopsis subvermispora saves electrical energy and improves strength properties during biomechanical pulping of wood. In: Kuwahara, M. and Shimada, M. (Eds.) Biotechnology in the Pulp and Paper Industry. UNI Publishers Company, Tokyo, pp. 3-8.
4. Akhtar, M., Blanchette, R.A. and Kirk, T.K. (1997a): Fungal Delignification and Biomechanical Pulping of Wood. In: Advances in Biochemical Engineering/ Biotechnology, Vol. 57. Springer Verlag, Berlin, pp.159-195.
5. Akhtar, M., Lent, M.J., Blanchette, R.A. and Kirk T.K. (1997b): Corn steep liquor lowers the amount of inoculum for biopulping, Tappi J. 80 (6), 161.
6. Ates, S., Atik, C, Ni, Y. and G̈müflkaya, E. (2008a): Comparision of different chemical pulps from wheat straw and bleaching with xylanase pre-treated ECF method, Turk. J. Agric. Forestry. 32,561.
7. Ates, S., Ni., Y., Atik, C. and Imamoglu, S. (2008b): Pretreatment by Ceriporiopsis subvermispora and Phlebia subserialis of wheat straw and its impact on subsequent soda-AQ and kraft-AQ pulping, Rom. Biotechnol. Letters. 13(5),3914.
8. Atik, C. and Imamoglu, S. (2003): Influence of Corn Steep Liquor in Nutrient Medium over Productivity of Biopulping Fungus Ceriporiopsis subvermispora, Anadolu Univ. Sci. Technol. J. 4,89.
9. Atik, C, Imamoglu, S. and Bernek, H. (2006): Impact of xylanase pre-treatment on peroxide bleaching stage of biokraft pulp, Int. Biodet. Biodeg. J. 58,22.
10. Bajpai, P., Mishra, S.P., Mishra, O.P., Kumar, S., Bajpai, P.K. and Singh, S. (2004a): Biochemical pulping of wheat straw, Tappi J. 8(3), 3.
11. Bajpai, P., Mishra, S.P., Mishra, O.P., Kumar, S. and Bajpai, P.K. (2004b): Biochemical pulping of bagasse, Biotechnol. Prog. 20,1270.
12. Blanchette, R.A., Burnes, T.A., Erdmans, M.M. and Akhtar, M. (1992): Evaluating isolates of Phanerochaete chrysosporium and Ceriporiopsis subvermispora for use in biological pulping Processes, Holzforschung. 46,109.
13. Blanchette, R.A., Farrell, R.L and Behrendt, C.J. (1993): Biological control for wood products, J. Biotechnology, 30(1), 115.
14. Çöpür, Y. and Tozluolu, A. (2007): The effect of AQ and NaBH4 on bio-kraft delignification (Ceriporiopsis subvermispora) of burtia pine chips, Int. Biodet. Biodeg. 60,126.
15. Chute, W. (2006): Refining response of wheat straw pulp and wood blends, In: Tappi Engineering, Pulping and Environmental Conference, Atlanta, GA, pp.1 -12.
16. Delopez, S., Tissot, M. and Delmas, M. (1996): Integrated cereal straw vaporization by an alkaline pre-extraction of hemicellulose prior to soda-anthraquinone pulping. Case study of barley straw, Biomass Bioen. J. 10 (4), 201.
17. Eckert, R.C., Pfeiffer, G.O., Gupta, M.K. and Lower, C.R. (1984): Soda anthra-quinone pulping of douglas fir, Tappi J. 67(11), 104.
18. Fatehi, P. and Xiao, H. (2008a): Adsorption characteristics of cationic PVA on sulfite fibers-a qualitative analysis, Colloids Surf. A: Physicochem. Eng. Aspects. 327(1-3), 127.
19. Fatehi, P. and Xiao, H. (2008b): The influence of charge density and molecular weight of cationic PVA on paper strength, Nord. Pulp Paper Res. J. 23(3), 285.
20. Fatehi, P. and Xiao, H. (2008c): Cationic poly (vinyl alcohol) as a dry strength additive for sulfite bleached pulps, 94th PAPTAC Annual Meeting Conference, Montreal, QC p. B571-B576.
21. Fatehi, P., Ates, S., Ward, J.E., Ni, Y. and Xiao, H. (2009): Impact of cationic poly (vinyl alcohol) on properties of papers made from two different pulps, Appita J., in press.
22. Ferraz, A., Rodriguez, J., Freer, J. and Baeza, J. (2000): Formic acid/acetone-organosolv pulping of white rotted Pinus radiata softwood, J. Chem. Technol. Biotechnol. 75,1190.
23. Fischer, K., Akhtar, M., Blanchette, R.A., Burnes, T.A., Messner, K. and Kirk, IK. (1994): Reduction of resin content in wood chips during experimental biological pulping processes, Holzforschung 48,285.
24. Francis, R.C., Shin, S.J., Omori, S., Amidon, T.E. and Blain, T.J. (2006): Soda pulping of hardwoods catalyzed by anthraquinone and methyl substituted anthra-quinones, J. Wood Chem. Technol. 26(2), 141.
25. Franco, H., Freer, J., Rodriguez, J., Baeza, J., Elissetche, J.P. and Mendonga, R. (2006): Kraft pulping of Drimys winteri wood chips biotreated with Ganoderma australe, J. Chem. Technol. Biotechnol. 81,196.
26. Fullerton.T.J. (1979): Soda-anthraquinone pulping, Tappi 62(8), 55.
27. Gao, Y., Vivek, R., Li, K., Zhou, Y. and Yuan, Z. (2008): Effect of HYP fibers on bulk and surface roughness of wood-free paper, Tappi J. 7(4), 4.
28. Ghosh, U.K. (2006): Production of paper grade pulp by organic acid based pulping of wheat straw, J. Indian Pulp Pap. Tech. Assoc. 8,45.
29. Giovannozzi, G., D'Annibale, A., Perani, C, Porri, A., Pastina, R, Minelli, V., Vitale, N. and Gelsomino, A. (1994): Characteristics of paper handsheets after combined biological pretreatments and conventional pulping of wheat straw, Tappi J. 77,151.
30. Gorres, J., Amiri, R., Wood, J.R. and Karnis, A. (1995): Shear bond strength of mechanical pulp fibres, J. Pulp Paper Sci. 21 (5), J161.
31. Grandfeldt, T. and Dahlin, H. (2003): Hardwood BCTMP improves bulk, smoothness and opacity, Pap. Technol. 44(7), 43.
32. Guerra, A., Mendonça, R. and Ferraz, A. (2002): Characterization of the residual lignins in Pinus taeda biodegraded by ceriporiopsis subvermispora by using in situ CuO oxidation and DFRC methods, Holzforschung 56,157.
33. Haggblom-Ahnger, U. and Eklund, D. (1998): Role of the middle ply in multi layered copy paper, Appita J. 51 (3), 199.
34. Hu, K., Ni. Y, Zhou, Y. and Zou, X. (2006): Substitition of hardwood kraft with aspen high-yield pulp in lightweight coated wood-free papers: Part I. synergy on basestock properties, Tappi J. 5(3), 21.
35. Jong, E., Chandra, R.P. and Saddler, J.N. (1997): Effect of a fungal treatment on the brightness and strength properties of a mechanical pulp from Douglas-fir, Bioresource Technol. 61,61.
36. Josefsson, P., Nilsson, R, Sundström, L, Norberg, C, Lie, E., Björklund- Jansson, M. and Henriksson, G. (2006): Controlled Seasoning of Scots Pine Chips Using an Albino Strain of Ophiostoma, Ind. Eng. Chem. Res. J. 45(7), 2374.
37. LeBel, R. (1987): Possible effects of increased wet pressing on some physical properties of newsprint, In: Annual Meeting, Can. Pulp Pap. Assoc, pp. a323-a328.
38. Li, H.M. and He, B.H. (2006): Research progress of the effect of fines on paper properties, Trans. China Pulp Pap. 21 (3), 102.
39. McDonald, J.D. and Pikulik, I.I. (1988): Pressability and strength of newsprint furnishes, Tappi J. 71 (2), 71.
40. Mendonça, R., Guerra, A. and Ferraz, A. (2002): Delignification of Pinus taeda wood chips treated with Ceriporiopsis subvermispora for preparing high-yield kraft pulps, J. Chem. Technol. Biotechnol. 77,411.
41. Mendonça, R., Ferraz, A., Kordsachia, 0. and Part, R. (2004): Alkaline sulfite/anthraquinone pulping of pine wood chips biotreated with Ceriporiopsis subvermispora, J. Chem. Technol. Biotechnol. 79,584.
42. Pikulik, I.I. (1999): Effects of shoe pressing on fine paper properties, Tappi J. 82(11), 88.
43. Procter, A.R. and Chow, W.M. (1976): Simulated hardwood market kraft pulp from western red cedar sawdust, Tappi J. 59(2), 119.
44. Scott, G.M., Lentz, M. and Akhtar, M. (1995): Fungal pretreatment of wood chips for sulfite pulping. In: TAPPI Pulping Conference Proceedings, Tappi Press, Atlanta, pp. 355-361.
45. Seo, Y.B. (2002): New concept of stiffness improvment in paper and board, J. KoreaTappi.34(5),63.
46. Usta, M., Eroglu, H. and Karaoglu, C. (1999): ASAE pulping of wheat straw (Triticum aestivum L), Cell. Chem.Technol. 33 (1), 91.
47. Vicentim, M.P. and Ferraz, A. (2008): Alkaline-sulfite chemithermomechanical pulping of Eucalyptus grandis bitreated by ceriporiopsis subvermispora under varied culture conditions, Holzforschung 62,375.
48. Villalba, L.L., Scott, G.M. and Schroeder, L.R. (2006): Modification of loblolly pine chips with Ceriporiopsis subvermispora Part 1: Effect of fungal treatment, J. Wood Chem. Technol. 26,339.
49. Westman, L. (1985): Bleached CTMP as a middle-layer in fine papers. In: International Mechanical Pulping Conference Proceedings, Swedish Assoc. Pulp Pap. Eng., Swed., pp. 258-262.
50. Wolfaardt, R, Taljaard, J.L., Jacobs, A., Male, J.R. and Rabie, C.J. (2004): Assessment of wood-inhabiting basidiomycetes for biokraft pulping of softwood chips, Bioresource Technol. 95,25.