Characterisation of formability behaviour of multiphase steels by micromechanical modelling

International Journal of Fracture

Volumn 157, Issue 1-2, 2009, Pages 55-69

  Uthaisangsuk, Vitoon ^a   Prahl, Ulrich ^a   Bleck, Wolfgang ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

Fracture mechanisms; GTN damage model; Microstructure; Multiphase steel; Representative volume element

Indexed keywords

ADVANCED HIGH STRENGTH STEEL; AUTOMOBILE INDUSTRY; CAR BODIES; CHARACTERISATION; CONSTITUENT PHASIS; DAMAGE MODEL; DUAL-PHASE STEEL; FAILURE PREDICTION; FORMING PROCESS; FRACTURE MECHANISMS; GTN DAMAGE MODEL; HETEROGENEOUS MICROSTRUCTURE; HIGH STRENGTH; LARGE ELONGATION; MATERIAL CHARACTERISATION; METALLOGRAPHIC ANALYSIS; MICRO LEVEL; MICROMECHANICAL MODELLING; MULTIPHASE STEEL; REPRESENTATIVE VOLUME ELEMENT; REPRESENTATIVE VOLUME ELEMENTS; SPATIAL DISTRIBUTION; TRANSFORMATION-INDUCED PLASTICITY;

MECHANICAL PROPERTIES; MECHANISMS; METAL FORMING; METALLOGRAPHY; MICROSTRUCTURE; SIZE DISTRIBUTION; STEEL; STEEL SHEET; STRENGTH OF MATERIALS; VOLUME MEASUREMENT;

FRACTURE;

EID: 67849097338     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-009-9329-4     Document Type: Conference Paper

References (35)

1. Al-Abbasi FM, Nemes JA (2003) Micromechanical modeling of dual phase steels. Int J Mech Sci 45:1449-1465. doi: 10.1016/j.ijmecsci.2003.10.007
2. Bergström Y (1969) A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile dislocations. Mater Sci Eng 5:193-200. doi: 10.1016/0025-5416(70)90081-9
3. Bernauer G, Brocks W (2002) Micro-mechanical modelling of ductile damage and tearing - results of a European numerical round robin. Fatigue Fract Eng Mater Struct 25:363-384. doi: 10.1046/j.1460-2695.2002.00468.x
4. Bernauer G, Brocks W, Muehlich U, Steglich D, Werwer M (1999) Remark for application of the Gurson-Tvergaard-Needleman model. Technical Note GKSS/ WMG/99/10, GKSS, 1999
5. Bouquerel J, Verbeken K, De Cooman BC (2006) Microstructure-based model for the static mechanical behaviour of multiphase steels. Acta Mater 54:1443-1456. doi: 10.1016/j.actamat.2005.10.059
6. Cornec A, Scheider I, Schwalbe KH (2003) On the practical application of the cohesive model. Eng Fract Mech 70:1963-1987. doi: 10.1016/ S0013-7944(03)00134-6
7. Dziallach S, Bleck W, Blumbach M, Hallfeldt T (2007) Sheet metal testing and flow curve determination under multiaxial conditions. Adv Eng Mater 9:987-994. doi: 10.1002/adem.200700129
8. Final Report ULSAB (1998) UltraLight steel auto body. American Iron and Steel Institute, Washington, DC
9. Gammage J, Wilkinson D, Brechet Y, Embury D (2004) A model for damage coalescence in heterogeneous multi-phase materials. Acta Mater 52:5255-5263. doi: 10.1016/j.actamat.2004.07.009
10. Garrison WM Jr, Moody NR (1987) Ductile fracture. J Phys Chem Solids 48:1035-1074. doi: 10.1016/0022-3697(87)90118-1
11. Godereaux S, Vivet S, Beaudoin JF (2002) Application of TRIP steels in the automotive industry. In: De Cooman BC (ed) Proceedings of the international conference on TRIP-aided high strength ferrous alloys, Gent, 2002
12. Horvath CD, Fekete JR (2004) Opportunities and challenges for increased usage of advanced high strength steels in automotive applications. In: Speer J (ed) Proceedings of the international conference on advanced high strength sheet steels for automotive applications, Colorado, 2004
13. Kaluza WM, Lake M, Pesek L, Bleck W (2000) Modelling of mechanical properties and local deformation of multi phase high strength steels. In: Abstracts of the international congress on advanced materials, their processes and applications (Materials Week 2000), Munich, 25-28 September 2000
14. Kikuma T, Nakazima K (1971) Effects of deforming conditions and mechanical properties on the stretch forming limits of steel sheets. In: Proceeding of ICSTIS, vol 11, pp 827-831
15. Lemaitre J, Desmorat R (2005) Engineering damages mechanics, ductile, creep, fatigue and brittle failures. Springer- Verlag, Berlin
16. McCutcheon DB, Trumper TW, Embury JD (1976) Controlled rolling of acicular ferrite steel plate. Rev Metall 73:143-174
17. Muehlich U, Siegmund T, Brocks W (2000) A user-material subroutine of the modified Gurson-Tvergaard-Needleman model of porous metal plasticity for rate and temperature dependent hardening. Technical Note GKSS/WMG/98/ 1, GKSS, 2000
18. Nakazima K, Kikuma T, Hasuka T (1968) Study on the formability of steel sheets. Yawata Tech Rep 284: 140-141
19. Needleman A, Tvergaard V (1987) An analysis of ductile rupture modes at a crack tip. J Mech Phys Solids 35:151-183. doi: 10.1016/ 0022-5096(87)90034-2
20. Papaefthymiou S, Bleck W, Prahl U, Carmen A, Sietsma J, Van der Zwaag S (2003) Micromechanical damage simulationsof TRIP steels. Mater Sci Forum 426-432:1355-1360
21. Papaefthymiou S, Prahl U, Bleck W, Van der Zwaag S, SietsmaJ (2006) Experimental observations on the correlationbetween microstructure and fracture of multiphase steels.Int J Mater Res (formerly Z Metallkd) 97:1723-1731
22. Pickering FB (1992) Constitution and properties of steels. In: Cahn RW, Haasen P, Kramer EJ (eds) Materials science and technology (a comprehensive treatment), vol 7. VCH, New York
23. Prahl U (2003) Schädigung und Versagen mikrolegierter Feinkornstähle in Experiment und Simulation. Dissertation, RWTH Aachen University
24. Prahl U, Uthaisangsuk V, Papaefthymiou S, Bleck W, Sietsma J, Vander Zwaag S (2007) Micromechanics-based modelling of properties and failure of multiphase steels. Comput Mater Sci 39:17-22. doi: 10.1016/ j.commatsci.2006.01.023
25. Reisner G, Werner EA, Fischer FD (1998) Micromechanical modeling of martensitic transformation in random microstructures. Int J Solids Struct 35:2457-2473. doi: 10.1016/S0020-7683(97)00149-2
26. Rodriguez RM, Gutierrez I (2003) Unified formulation to predict the tensile curves of steels with different microstructures. Mater Sci Forum 426-432: 4525-4530
27. Rodriguez RM, Gutierrez I (2004) Mechanical behaviour of steels with mixed microstructures. In: Lamberigts M (ed) Proceeding of the 2nd international conference on thermomechanical processing of steels (TMP 2004), Liege, 2004
28. Ruggieri C, Panontin TL, Dodds RH (1996) Numerical modeling of ductile crack growth in 3-D using computational cell elements. Int J Fract 82:67-95. doi: 10.1007/BF00017864
29. Shan ZH, Gokhale AM (2001) Micromechanics of complex three-dimensional microstructures. Acta Mater 49: 2001-2015. doi: 10.1016/ S1359-6454(01)00093-3
30. Tasan CC, Hoefnagels JMP, Peelings RHJ, Geers MGD, Ten Horn CHLJ, Vegter H (2007) Ductile damage evolution and strain path dependency. In: Cueto E, Chinesta F (eds) AIP conference proceedings, Zaragoza, Spain, 2007, pp 187-192
31. Thomser C, Prahl U, Vegter H, Bleck W (2007) Modelling the mechanical properties of multiphase steels. In: Szeliga D (ed) Proceeding of the 14th conference computer methods in material science, Zakopane, 2007
32. Tvergaard V (1981) Influence of voids on shear band instabilities under plane strain conditions. Int J Fract 17:389-407. doi: 10.1007/BF00036191
33. Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Mater 32:157-169. doi: 10.1016/ 0001-6160(84)90213-X
34. Uthaisangsuk V, Muenstermann S, Prahl U, Bleck W (2008) Experimental and numerical failure criterion for formability prediction in sheet metal forming. Comput Mater Sci 43:43-50. doi: 10.1016/j.commatsci.2007.07.036
35. Zhang Y, Chen ZT (2007) On the effect of stress triaxiality on void coalescence. Int J Fract 143: 105-112. doi: 10.1007/s10704-006-9045-2