On the practical application of the cohesive model

Engineering Fracture Mechanics

Volumn 70, Issue 14, 2003, Pages 1963-1987

  Cornec, Alfred ^a   Scheider, Ingo ^a   Schwalbe, Karl Heinz ^a  

^a INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

Cohesive energy; Cohesive model; Cohesive stress; Finite element analysis; Simulation of crack extension; Validation

Indexed keywords

SEPARATION; STRESS ANALYSIS; TRACTION (FRICTION);

COHESIVE STRESS;

FRACTURE MECHANICS;

FRACTURE MECHANICS;

EID: 0038265526     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0013-7944(03)00134-6     Document Type: Article

References (54)

1. ASTM E 1820-99. Standard test method for fracture toughness. West Conshohocken: American Society for Testing and Materials (ASTM); 1997
2. ISO 12135. Metallic materials--unified method of test for the determination of quasistatic fracture toughness. International Standard Organisation (ISO), in press
3. c, critical CTOD and critical J values of metallic materials. London: British Standards Institution; 1991
4. 0, for ferritic steels in the transition range. West Conshohocken: American Society for Testing and Materials (ASTM); 1997
5. ESIS P1-92. ESIS reommendations for determining the fracture resistance of ductile materials. European Stuctural Integrity Society; 1992
6. ESIS P2-92. ESIS procedure for determining the fracture resistance of ductile materials. European Stuctural Integrity Society; 1992
7. ISO/TC164/SC-N413. Metallic materials--method of test for the determination of resistance to stable crack extension using specimens of low constraint. International Standard Organisation (ISO), Draft 6, 2002
8. Schwalbe K-H, Heerens J, Zerbst U, Koçak M. EFAM-GTP 02. The GKSS Procedure for determining the fracture behaviour of materials. Geesthacht, Germany: Research Centre Publications, in preparation
9. SINTAP. Structural Integrity Assessment Procedure. EU-Project BE 95-1462: Final Report. Brite Euram Programme, Brussels, 1999
10. R6, Revision 4. Assessment of the Integrity of Structures Containing Defects. British Energy Generation Ltd.; 2001
11. Schwalbe K-H, Zerbst U, Kim Y-J, Brocks W, Cornec A, Heerens J, et al. EFAM ETM 97-the ETM method for assessing the significance of crack-like defects in engineering structures, comprising the versions ETM 97/1 and ETM 97/2. Report GKSS 98/E/6. Geesthacht, Germany: GKSS Research Centre Publications; 1998
12. Schwalbe K-H, Kim Y-J, Hao S, Cornec A, Koçak M. EFAM ETM-MM 96-the ETM method for assessing the significance of crack-like defects in joints with mechanical heterogeneity (strength mismatch). Report GKSS 97/E/9. Geesthacht, Germany: GKSS Research Centre Publications; 1997
13. FITNET (European Fitness-for service Network). Available from http://www.eurofitnet.org
14. Schwalbe K.-H. Heerens J. R-curve testing and its relevance to structural assessment Fat. Fract. Engng. Mat. Struct. 21 1998 1259-1271
15. Zerbst U. Heerens J. Schwalbe K.-H. Fracture mechanics analysis based on a local simulation principle Fat. Fract. Engng. Mat. Struct. 18 1995 371-376
16. Cherry A.H. France C.C. Goldthorpe M.R. Compendium of T-stress solutions for two and three-dimensional cracked geometries Fat. Fract. Engng. Mat. Struct. 18 1995 141-155
17. Shih C.F. O'Dowd N.P. Kirk M.T. A framework for quantifying crack tip constraint Hacket E.M. Schwalbe K.-.H. Dodds R.H. Constraint effects in fracture. ASTM STP 1171 1993 2-20 American Society for Testing and Materials Philadelphia
18. Zhang Z. Thaulow C. Hauge M. On the constraint effects in HAZ-cracked wide plate weldments Koçak M. Mis-matching of interfaces and welds. 2nd International Symposium 1997 749-758 GKSS Research Centre Publication [ISBN 3-00-001951-0]
19. Zahoor A. Ductile fracture handbook. Novotech. Cop - EPRI, Research Project 1757-69, vol. 1: 1989, vol. 2: 1990, vol. 3: 1991
20. Barenblatt G.I. The mathematical theory of equilibrium cracks in brittle fracture Adv. Appl. Mech. 7 1962 55-129
21. Dugdale D.S. Yielding of steel sheets containing slits J. Mech. Phys. Solids 8 1960 100-104
22. Hillerborg A. Modeer M. Petersson P.E. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements Cem. Conr. Res. 6 1976 773-782
23. Petersson PE. Crack growth and development of fracture zones in plain concrete and similar materials. In: Report TVBM-1006, Division of Building Materials, Lund Institute of Technology, Denmark; 1981
24. Elices M. Guinea G.V. Gòmez J. Planas J. The cohesive zone model: advantages, limitations and challenges Engng. Fract. Mech. 69 2002 137-163
25. Planas J. Guinea G.V. Elices M. Size effect and inverse analysis in concrete fracture Int. J. Fract. 95 1999 367-378
26. Bazant Z.P. Concrete fracture models: testing and practice Engng. Fract. Mech. 69 2002 165-205
27. Carpinteri A, Ferro G. Fracture assessment in concrete structures. In: Milne I, Ritchie RO, Karihaloo B, editors. Comprehensive structural integrity, vol. 7. Amsterdam: Elsevier Science, 2003, in press
28. Tijssens MGA. On the cohesive surface methodology for fracture of brittle heterogeneous solids. PhD Thesis at Technical University Delft Netherlands: Shaker Publishing B.V.; 2000 [ISBN 90-423-0129]
29. Tijssens van der Giessen E. Sluys L.J. Simulation of mode I crack growth in polymers by crazing Int. J. Solids Struct. 37 2000 7307-7327
30. Needleman A. A continuum model for void nucleation by inclusion debonding J. Appl. Mech. 54 1987 25-531
31. Needleman A. An analysis of tensile decohesion along an interface J. Mech. Phys. Solids 38 1990 289-324
32. Tvergaard V. Hutchinson J.W. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids J. Mech. Phys. Solids 40 1992 1377-1397
33. Tvergaard V. Hutchinson J.W. Effect of T-stress on mode I crack growth resistance in a ductile solid Int. J. Solids Struct. 31 1994 823-833
34. Tvergaard V. Hutchinson J.W. Toughness of an interface along a thin ductile layer joining elastic solids Philos. Mag. A 70 1994 641-656
35. Tvergaard V. Resistance curves for mixed mode interface crack growth between dissimilar elastic-plastic solids J. Mech. Phys. Solids 49 2001 2689-2703
36. Lin G. Numerical investigation of crack growth behaviour using a cohesive zone model. PhD Thesis, University of Hamburg-Harburg. Geesthacht, Germany: GKSS Research Cenrte Publication, Report GKSS 98/E/8; 1998
37. Lin G. Cornec A. Schwalbe K.-H. Three-dimensional finite element simulation of crack extension in aluminium alloy 2024-FC Fat. Fract. Engng. Mat. Struct. 21 1998 1159-1173
38. Cornec A. Lin G. Schwalbe K.-H. Simulation von Rißwiderstandskurven mit dem Kohäsivmodell: Large scale yielding (simulation of crack resistance using a cohesive model: large scale yielding) Mat.-wiss. u. Werkstofftechnik 29 1998 652-661
39. Xu X.-P. Needleman A. Numerical simulations of fast crack growth in brittle solids J. Mech. Phys. Solids 42 1994 1397-1434
40. Zavattieri P.D. Espinosa H.D. Grain level analysis of crack initiation and propagation in brittle materials Acta Mater. 49 2001 4291-4311
41. Allen D.H. Searcy C.R. A micromechanical model for a viscoelastic cohesive zone Int. J. Fract. 107 2001 159-176
42. Deshpande V.S. Needleman A. van der Giessen E. A discrete dislocation analysis of near-threshold fatigue crack growth Acta Mater. 49 2001 3189-3203
43. Schwalbe K-H. The Engineering Flaw Assessment Method (EFAM)--Document EFAM 96. Geesthacht, Germany: GKSS Research Centre Publications, Report GKSS 98/E/40; 1998
44. Bocca P. Carpinteri A. Valente S. Size effects in the mixed mode crack propagation: softening and snap-back analysis Engng. Fract. Mech. 35 1990 159-170
45. Tvergaard V. Hutchinson J.W. The influence of plasticity on mixed mode interface toughness J. Mech. Phys. Solids 41 1993 1119-1135
46. Camacho G.T. Ortiz M. Computational modelling of impact damage in brittle materials Int. J. Solids Struct. 33 1996 2899-2938
47. Siegmund T. Brocks W. Modelling of crack growth in thin sheet aluminum alloys Halford G.L. Gallagher J.P. Fatigue and fracture mechanics. ASTM STP 1389 2000 475-485 American Society for Testing and Materials Philadelphia
48. Lin G. Cornec A. Characterization of crack resistance: simulation with a new cohesive model. (Numerische Untersuchung zum Verhalten von Rißwiderstandskurven: Simulation mit dem Kohäsivmodell, in German.) Mat.-wiss. u. Werkstofftechnik 27 1996 252-258
49. Scheider I. Bruchmechanische Bewertung von Laserschweißverbindungen durch numerische Rißfortschrittsimumlation mit dem Kohäsivzonenmodell. PhD Thesis, University of Hamburg-Harburg, Report GKSS 2001/3, Geesthacht, Germany: GKSS Research Centre Publication; 2000
50. ABAQUS FEM code. Hibbitt, Karlsson, and Sorensen, Inc., 1080 Main Street, Pawtucket, RI, USA: ABAQUS User's manual, Version 5.8
51. Scheider I. Simulation of cup-cone fracture in round bars using the cohesive zone model Bathe K.-J. Computational fluid and solid mechanics (First MIT Conference) vol. 1 2001 460-462 Elsevier
52. Hellmann D. Schwalbe K.-H. Geometry and size effects on J-R and δ-R curves under plane stress conditions Sanford R.J. Fracture mechanics: Fifteenth Symposium. ASTM STP 833 1984 577-605 American Society for Testing and Materials Philadelphia
53. Heerens J. Schwalbe K.-H. Nix C. Influence of specimen size on J-, Jm- and δ5-R-curves for side-grooved compact-tension specimens Hacket E.M. Schwalbe K.-H. Dodds R.H. Constraint effects in fracture. ASTM STP 1171 1993 429-472 American Society for Testing and Materials Philadelphia
54. Heerens J, Hellmann D. Thickness contraction and ligament contraction-two quantities to analyse constraint effects on ductile fracture toughness. In: Koçak M, editor. The life of a crack-initiation growth fracture, Manusscript No. IX. Geesthacht, Germany: GKSS Research Centre Publications; 2001 [ISBN 3-00-007431-7]