Release of monomers from different core build-up materials

Dental Materials

Volumn 25, Issue 9, 2009, Pages 1090-1095

  Polydorou, Olga ^a   Hammad, Mohammad ^b   König, Armin ^a   Hellwig, Elmar ^a   Kümmerer, Klaus ^a  

^a UNIVERSITY OF FREIBURG   (Germany)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Core build up; Elution; High performance liquid chromatography; Mass spectrometry; Monomers

Indexed keywords

BIS-GMA; BISPHENOL A; CORE BUILD-UP; CURED MATERIALS; DEGREE OF CONVERSION; ELUTION; LC-MS/MS; ROOM TEMPERATURE; STORAGE MEDIUM; TOXICOLOGICAL EFFECTS; TWO-MATERIALS;

CHROMATOGRAPHIC ANALYSIS; CHROMATOGRAPHY; COMPOSITE MATERIALS; COMPOSITE MICROMECHANICS; ETHANOL; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; LIQUIDS; MASS SPECTROMETERS; MASS SPECTROMETRY; MONOMERS; PHENOLS;

CURING;

4,4' ISOPROPYLIDENEDIPHENOL; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; MACROGOL DERIVATIVE; PHENOL DERIVATIVE; POLYMETHACRYLIC ACID DERIVATIVE; RESIN; TRIETHYLENE GLYCOL DIMETHACRYLATE;

ARTICLE; CHEMISTRY; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; MASS SPECTROMETRY; MATERIALS TESTING; TOOTH CROWN;

BISPHENOL A-GLYCIDYL METHACRYLATE; CHROMATOGRAPHY, HIGH PRESSURE LIQUID; COMPOSITE RESINS; CROWNS; MASS SPECTROMETRY; MATERIALS TESTING; PHENOLS; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS;

EID: 67651124844     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.02.014     Document Type: Article

References (39)

1. Sadek F.T., Monticelli F., Goracci C., Tay F.R., Cardoso P.E., and Ferrari M. Bond strength performance of different resin composites used as core materials around fiber posts. Dent Mater 23 (2007) 95-99
2. Stavridakis M.M., Kakaboura A.I., and Krejci I. Degree of remaining C{double bond, long}C bonds, polymerization shrinkage and stresses of dual-cured core build-up resin composites. Oper Dent 30 (2005) 443-452
3. Tachibana K., Kuroe T., Tanino Y., Satoh N., Ohata N., Sano H., et al. Effects of incremental curing on contraction stresses associated with various resin composite buildups. Quintessence Int 35 (2004) 299-306
4. Bolhuis P.B., de Gee A.J., Kleverlaan C.J., El Zohairy A.A., and Feilzer A.J. Contraction stress and bond strength to dentin for compatible and incompatible combinations of bonding systems and chemical and light-cured core build-up resin composites. Dent Mater 22 (2006) 223-233
5. Myers M.L., Caughman W.F., and Rueggeberg F.A. Effect of restoration composition, shade, and thickness on the cure of a photoactivated resin cement. J Prosthodont 3 (1994) 149-157
6. Miyazaki M., Hinoura K., Onose H., and Moore B.K. Influence of light intensity on shear bond strength to dentin. Am J Dent 8 (1995) 245-248
7. Caughman W.F., Chan D.C., and Rueggeberg F.A. Curing potential of dual-polymerizable resin cements in simulated clinical situations. J Prosthet Dent 86 (2001) 101-106
8. Silikas N., and Watts D.C. High pressure liquid chromatography of dentin primers and bonding agents. Dent Mater 16 (2000) 81-88
9. Moharamzadeh K., Van Noort R., Brook I.M., and Scutt A.M. HPLC analysis of components released from dental composites with different resin compositions using different extraction media. J Mater Sci Mater Med 18 (2007) 133-137
10. Polydorou O., Trittler R., Hellwig E., and Kummerer K. Elution of monomers from two conventional dental composite materials. Dent Mater 23 (2007) 1535-1541
11. Yap A.U., Han V.T., Soh M.S., and Siow K.S. Elution of leachable components from composites after LED and halogen light irradiation. Oper Dent 29 (2004) 448-453
12. Munksgaard E.C., Peutzfeldt A., and Asmussen E. Elution of TEGDMA and BisGMA from a resin and a resin composite cured with halogen or plasma light. Eur J Oral Sci 108 (2000) 341-345
13. Lee S.Y., Greener E.H., and Menis D.L. Detection of leached moieties from dental composites in fluids stimulating food and saliva. Dent Mater 11 (1995) 348-353
14. Geurtsen W. Substances released from dental composites and glass ionomer cements. Eur J Oral Sci 106 (1998) 687-695
15. Geurtsen W., Lehmann F., Spahl W., and Leyhausen G. Cytotoxicity of 35 composite monomers/additives in permanent 3T3- and three human oral primary fibroblast cultures. J Biomed Mater Res 41 (1998) 474-480
16. Pelka M., Distler W., and Petschelt A. Elution parameters and HPLC-detection of single components from resin composite. Clin Oral Investig (1999) 3194-3200
17. Wataha J.C., Rueggeberg F.A., Lapp C.A., Lewis J.B., Lockwood P.E., Ergle J.W., et al. In vitro cytotoxicity of resin-containing restorative materials after aging in artificial saliva. Clin Oral Investig 3 (1999) 144-149
18. Al-Hiyasat A.S., Darmani H., and Elbetieha A.M. Leached components from dental composites their effects on fertility of female mice. Eur J Oral Sci 112 (2004) 267-272
19. Tanaka K., Taira M., Shintani H., Wasaka K., and Yamaki M. Residual monomers (TEG-DMA and Bis-GMA) of a set visible-light-cured dental resin composite when immersed in water. J Oral Rehabil 18 (1991) 353-362
20. Spahl W., Budzikiewicz H., and Geurtsen W. Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry. J Dent 26 (1998) 137-145
21. Ortengren U., Wellendorf H., Karlsson S., and Ruyter I.E. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Rehabil 28 (2001) 1106-1115
22. Volk J., Leyhausen G., Dogan S., and Geurtsen W. Additive effects of TEGDMA and hydrogenperoxide on the cellular glutathione content of human gingival fibroblasts. Dent Mater 23 (2007) 921-926
23. Reichl F.X., Simon S., Esters M., Seiss M., Kehe K., Kleinsasser N., et al. Cytotoxicity of dental composite (co)monomers and the amalgam component Hg(2+) in human gingival fibroblasts. Arch Toxicol 80 (2006) 465-472
24. Yoshii E. Cytotoxic effects of acrylates and methacrylates: relationships of monomer structures and cytotoxicity. J Biomed Mater Res 37 (1997) 517-524
25. Asmussen E. Factors affecting the quantity of remaining double bonds in restorative resin polymers. Scand J Dent Res 90 (1982) 490-496
26. Lutz F., Setcos J.C., Phillips R.W., and Roulet J.F. Dental restorative resins. Types and characteristics. Dent Clin N Am 27 (1983) 697-712
27. Hu X., Marquis P.M., and Shortall A.C. Two-body in vitro wear study of some current dental composites and amalgams. J Prosthet Dent 82 (1999) 214-220
28. Oooka S., Miyazaki M., Takamizawa T., Tsubota K., Kurokawa H., and Rikuta A. Influence of adhesive polymerization mode on dentin bond strength of direct core foundation systems. J Oral Sci 46 (2004) 185-189
29. el-Badrawy W.A., and el-Mowafy O.M. Chemical versus dual curing of resin inlay cements. J Prosthet Dent 73 (1995) 515-524
30. Hofmann N., Papsthart G., Hugo B., and Klaiber B. Comparison of photo-activation versus chemical or dual-curing of resin-based luting cements regarding flexural strength, modulus and surface hardness. J Oral Rehabil 28 (2001) 1022-1028
31. Sideridou I.D., Achilias D.S., and Karabela M.M. Sorption kinetics of ethanol/water solution by dimethacrylate-based dental resins and resin composites. J Biomed Mater Res B: Appl Biomater 81 (2007) 207-218
32. Schneider L.F., Moraes R.R., Cavalcante L.M., Sinhoreti M.A., Correr-Sobrinho L., and Consani S. Cross-link density evaluation through softening tests: effect of ethanol concentration. Dent Mater 24 (2008) 199-203
33. Wu W., and McKinney J.E. Influence of chemicals on wear of dental composites. J Dent Res 61 (1982) 1180-1183
34. McKinney J.E., and Wu W. Chemical softening and wear of dental composites. J Dent Res 64 (1985) 1326-1331
35. Schmalz G., Preiss A., and Arenholt-Bindslev D. Bisphenol-A content of resin monomers and related degradation products. Clin Oral Investig 3 (1999) 114-119
36. Gagliani M., Fadini L., and Ritzmann J.M. Depth of cure efficacy of high-power curing devices vs. traditional halogen lamps. J Adhes Dent 4 (2002) 41-47
37. Joskow R., Barr D.B., Barr J.R., Calafat A.M., Needham L.L., and Rubin C. Exposure to bisphenol A from bis-glycidyl dimethacrylate-based dental sealants. J Am Dent Assoc 137 (2006) 353-362
38. Pulgar R., Olea-Serrano M.F., Novillo-Fertrell A., Rivas A., Pazos P., Pedraza V., et al. Determination of Bisphenol A and related romatic released from Bis-GMA-based composites and sealants by high performance liquid chromatography. Environ Health Perspect (2000) 108
39. Olea N., Pulgar R., Pérez P., Olea-Serrano F., Rivas A., Novillo-Fertrell A., et al. Estrogenicity of resin-based composites and sealants used in dentistry. Environ Health Perspect 104 (1996) 298-305