Degree of conversion of Filtek Silorane Adhesive System and Clearfil SE Bond within the hybrid and adhesive layer: An in situ Raman analysis

Dental Materials

Volumn 25, Issue 9, 2009, Pages 1178-1185

  Navarra, Chiara O ^a   Cadenaro, Milena ^a   Armstrong, Steven R ^b   Jessop, Julie ^c   Antoniolli, Francesca ^a   Sergo, Valter ^a   Di Lenarda, Roberto ^a   Breschi, Lorenzo ^a,d  

^a UNIVERSITY OF TRIESTE   (Italy)

^b UNIVERSITY OF IOWA   (United States)

^c IA United States   (United States)

^d CNR   (Italy)

Author keywords

Degree of conversion; Dentin bonding systems; Hybrid layer; Raman spectroscopy; Silorane

Indexed keywords

ADHESIVE INTERFACES; ADHESIVE LAYERS; ADHESIVE SYSTEMS; BONDED INTERFACE; DEGREE OF CONVERSION; DENTIN BONDING SYSTEMS; DOUBLE BONDS; HUMAN DENTIN; HYBRID LAYER; IN-SITU; LONG TERM STABILITY; MATRIX; MICRO RAMAN SPECTROSCOPY; MICRO-RAMAN; OPTIMAL STABILITY; RAMAN SPECTRA; REACTION PEAKS; RELATIVE INTENSITY; SILORANE; TWO-WAY ANOVA;

BOND (MASONRY); FUNCTIONAL GROUPS; MECHANICAL PROPERTIES; MINING; RAMAN SCATTERING; RAMAN SPECTROSCOPY; SPONTANEOUS EMISSION;

SYSTEM STABILITY;

CLEARFIL SE BOND; DENTIN BONDING AGENT; RESIN CEMENT; SILORANE SYSTEM ADHESIVE;

ARTICLE; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; HARDNESS; HUMAN; MATERIALS TESTING; MOLAR TOOTH; PHASE TRANSITION; RADIATION EXPOSURE; RAMAN SPECTROMETRY; TOOTH PERMEABILITY;

DENTAL BONDING, LIGHT-CURED; DENTAL STRESS ANALYSIS; DENTIN PERMEABILITY; DENTIN-BONDING AGENTS; HARDNESS; HUMANS; MATERIALS TESTING; MOLAR; PHASE TRANSITION; RESIN CEMENTS; SPECTRUM ANALYSIS, RAMAN;

EID: 67651102906     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.05.009     Document Type: Article

References (48)

1. Bowen R.L., and Marjenhoff W.A. Development of an adhesive bonding system. Oper Dent Supplement 5 (1992) 75-80
2. Bowen R.L. Use of epoxy resins in restorative materials. J Dent Res 35 (1956) 360-369
3. 3M, Filtek Silorane technical profile, 2007 http://multimedia.mmm.com/mws/mediawebserver.dyn?6666660Zjcf6lVs6EVs66Slf2COrrrrQ-.
4. Lutz F., Kreici I., and Barbakow F. Quality and durability of marginal adaptation in bonded composite restorations. Dent Mater 7 (1991) 107-113
5. Eick J.D., and Welch F.H. Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity. Quintessence Int 17 (1986) 103-111
6. De Munck J., Van Landuyt K., Peumans M., Poitevin A., Lambrechts P., Braem M., et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 84 (2005) 118-132
7. Breschi L., Mazzoni A., Ruggeri A., Cadenaro M., Di Lenarda R., and De Stefano Dorigo E. Dental adhesion review: aging and stability of the bonded interface. Dent Mater 24 (2008) 90-101
8. Hilton T.J. Can modern restorative procedures and materials reliably seal cavities? In vitro investigations. Part 1. Am J Dent 15 (2002) 198-210
9. Hilton T.J. Can modern restorative procedures and materials reliably seal cavities? In vitro investigations. Part 2. Am J Dent 15 (2002) 279-289
10. Irie M., Suzuki, and Watts D.C. Marginal gap formation of light-activated restorative materials: effects of immediate setting shrinkage and bond strength. Dent Mater 18 (2002) 203-210
11. Lutz E., Krejci I., and Oldenburg T.R. Elimination of polymerization stresses at the margins of posterior composite resin restorations: a new restorative technique. Quintessence Int 17 (1986) 777-784
12. Kanca III J., and Suh B.I. Pulse activation: reducing resin-based composite contraction stresses at the enamel cavosurface margins. Am J Dent 12 (1999) 107-112
13. Unterbrink G.L., and Liebenberg W.H. Flowable resin composites as "filled adhesives": literature review and clinical recommendations. Quintessence Int 30 (1999) 249-257
14. Condon J.R., and Ferracane J.L. Reduction of composite contraction stress through non-bonded microfiller particles. Dent Mater 14 (1998) 256-260
15. Condon J.R., and Ferracane J.L. Reduced polymerization stress through non-bonded nanofiller particles. Biomaterials 23 (2002) 3807-3815
16. Braga R.R., and Ferracane J.L. Alternatives in polymerization contraction stress management. Crit Rev Oral Biol Med 15 (2004) 176-184
17. Weinmann W., Thalacker C., and Guggenberger R. Siloranes in dental composites. Dent Mater 21 (2005) 68-74
18. Palin W.M., Fleming G.J.P., Burke F.J.T., Marquis P.M., and Randall R.C. The influence of short and medium-term water immersion on the hydrolytic stability of novel low-shrink dental composites. Dent Mater 21 (2005) 852-863
19. Thalacker C, Heumann A, Weinmann W, Guggenberger R, Luchterhandt T, Syrek A. Marginal integrity of class V silorane and methacrylate composite restorations. J Dent Res 83(Spec Iss A): abstract number 1364; 2004 (www.dentalresearch.org).
20. Thalacker C, Heumann A, Hampe R, Weinmann W, Guggenberger R, Syrek A. Marginal integrity of silorane and methacrylate restorations after load cycle. J Dent Res 84(Spec Iss A):abstract number 0277; 2005 (www.dentalresearch.org).
21. Palin W.M., Fleming G.J.P., Nathwani H., Burke F.J.T., and Randall R.C. In vitro cuspal deflection and microleakage of maxillary premolars restored with novel low-shrink dental composites. Dent Mater 21 (2005) 324-335
22. Cadenaro M., Antoniolli F., Sauro S., Tay F.R., Di Lenarda R., Prati C., et al. Degree of conversion and permeability of dental adhesives. Eur J Oral Sci 113 (2005) 525-530
23. Breschi L., Cadenaro M., Antoniolli F., Sauro S., Biasotto M., Prati C., et al. Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability. Dent Mater 23 (2007) 1066-1072
24. Sadek F.T., Calheiros F.C., Cardoso P.E., Kawano Y., Tay F., and Ferrari M. Early and 24-hour bond strength and degree of conversion of etch-and-rinse and self-etch adhesives. Am J Dent 21 (2008) 30-34
25. Wang Y., and Spencer P. Quantifying adhesive penetration in adhesive/dentin interface using confocal Raman microspectroscopy. J Biomed Mater Res 59 (2002) 46-55
26. Zou Y., Armstrong S.R., and Jessop J.L.P. Apparent conversion of adhesive resin in the hybrid layer. Part 2. In situ studies of the resin-dentin bond. J Biomed Mater Res A 89 (2009) 355-362
27. Rueggeberg F.A., and Craig R.G. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res 67 (1988) 932-937
28. Miyazaki M., Onose H., Lida N., and Kazama H. Determination of residual double bonds in resin-dentin interface by Raman spectroscopy. Dent Mater 19 (2003) 245-251
29. Wang Y., and Spencer P. Continuing etching of an all-in-one adhesive in wet dentin tubules. J Dent Res 84 (2005) 350-354
30. Tsuda H., and Arends J. Raman spectroscopy in dental research: a short review of recent studies. Adv Dent Res 11 (1997) 539-547
31. Wang Y., and Spencer P. Hybridization efficiency of the adhesive/dentin interface with wet bonding. J Dent Res 82 (2003) 141-145
32. Ferracane J.L., and Greener E.H. The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 20 (1986) 121-131
33. Dickens S.H., and Cho B.H. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater 21 (2005) 354-364
34. Tay F.R., Pashley D.H., Hiraishi N., Imazato S., Rueggeberg F.A., Salz U., et al. Tubular occlusion prevents water-treeing and through-and-through fluid movement in a single-bottle, one-step self-etch adhesive model. J Dent Res 84 (2005) 891-896
35. Jacobsen T., and Söderholm K.J. Some effects of water on dentin bonding. Dent Mater 11 (1995) 132-136
36. Sano H., Yoshikawa T., Pereira P.N., Kanemura N., Morigami M., Tagami J., et al. Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res 78 (1999) 906-911
37. Burrow M.F., Inokoshi S., and Tagami J. Water sorption of several bonding resins. Am J Dent 12 (1999) 295-298
38. Takahashi A., Inoue S., Kawamoto C., Ominato R., Tanaka T., Sato Y., et al. In vivo long-term durability of the bond to dentin using two adhesive systems. J Adhes Dent 4 (2002) 151-159
39. De Munck J., Van Meerbeek B., Yoshida Y., Inoue S., Vargas M., Suzuki K., et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82 (2003) 136-140
40. Malacarne J., Carvalho R.M., de Goes M.F., Svizerd V., Pashley D.H., Tay F.R., et al. Water sorption/solubility of dentinal adhesives resins. Dent Mater 22 (2006) 973-980
41. Brackett W.W., Ito S., Tay F.R., Haisch L.D., and Pashley D.H. Microtensile dentin bond strength of self-etching resins: effect of a hydrophobic layer. Oper Dent 30 (2005) 733-738
42. King N.M., Tay F.R., Pashley D.H., Hashimoto M., Ito S., Brackett W.W., et al. Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent 18 (2005) 126-134
43. Cadenaro M., Breschi L., Rueggeberg F.A., Agee K., Di Lenarda R., Carrilho M., et al. Effect of adhesive hydrophilicity and curing-time on the permeability of resins bonded to water vs. ethanol-saturated acid-etched dentin. Dent Mater 25 (2009) 39-47
44. Tay F.R., Hashimoto M., Pashley D.H., Peters M.C., Lai S.C., Yiu C.K., et al. Aging affects two modes of nanoleakage expression in bonded dentin. J Dent Res 82 (2003) 537-541
45. Spencer P., Wang Y., Katz J.L., and Misra A. Physicochemical interactions at the dentin/adhesive interface using FTIR chemical imaging. J Biomed Opt 10 (2005) 031104
46. Zou Y., Armstrong S.R., and Jessop J.L.P. Apparent conversion of adhesive resin in the hybrid layer. Part 1. Identification of an internal reference for Raman spectroscopy and the effects of water storage. J Biomed Mater Res 86A (2008) 883-891
47. Wang Y., and Spencer P. Physiochemical interactions at the interfaces between self-etch adhesive systems and dentine. J Dent 32 (2004) 567-579
48. Santini A., and Miletic V. Quantitative micro-Raman assessment of dentine demineralization, adhesive penetration, and degree of conversion of three dentine bonding systems. Eur J Oral Sci 116 (2008) 177-183