Effect of adhesive hydrophilicity and curing time on the permeability of resins bonded to water vs. ethanol-saturated acid-etched dentin

Dental Materials

Volumn 25, Issue 1, 2009, Pages 39-47

  Cadenaro, Milena ^a   Breschi, Lorenzo ^a,b   Rueggeberg, Frederick A ^c   Agee, Kelli ^d   Di Lenarda, Roberto ^a   Carrilho, Marcela ^e,f   Tay, Franklin R ^d   Pashley, David H ^d  

^a UNIVERSITY OF TRIESTE   (Italy)

^b CNR   (Italy)

^c AUGUSTA UNIVERSITY   (United States)

^d MEDICAL COLLEGE OF GEORGIA   (United States)

^e UNIVERSITY OF SÃO PAULO   (Brazil)

^f Universidade Bandeirante de Sao Paulo   (Brazil)

Author keywords

Curing time; Degree of conversion; Dentin permeability; Ethanol wet bonding; Hydrophilic resins

Indexed keywords

ACIDS; ADHESIVES; CAPILLARITY; CEMENTS; CURING; DENTAL MATERIALS; ETHANOL; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FOURIER TRANSFORMS; HYDROPHILICITY; INFRARED SPECTROSCOPY; LIQUIDS; SOLIDS; SPECTROSCOPIC ANALYSIS;

CURING TIME; CURING TIMES; DEGREE OF CONVERSION; DEGREE OF CONVERSIONS; DENTAL ADHESIVES; DENTIN PERMEABILITY; ETCHED DENTINS; FLUID FLOWS; FOURIER TRANSFORM INFRARED; HYDROPHILIC RESINS; PLASTIC PLATES; SATURATED ACIDS; SMEAR LAYERS;

RESINS;

2 HYDROXYETHYL METHACRYLATE; 2,2 DI(4 METHACRYLOXYPHENYL)PROPANE; 2,2-DI(4-METHACRYLOXYPHENYL)PROPANE; ALCOHOL; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; POLYMETHACRYLIC ACID DERIVATIVE; RESIN CEMENT; SOLVENT; TRIETHYLENE GLYCOL DIMETHACRYLATE; WATER;

ADHESION; ARTICLE; CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL SURGERY; DENTIN; HUMAN; HYDROGEN BOND; HYDROPHOBICITY; INFRARED SPECTROSCOPY; MATERIALS TESTING; METHODOLOGY; PERMEABILITY; SOLUBILITY; TIME; TOOTH PERMEABILITY; ULTRASTRUCTURE; WETTABILITY;

ACID ETCHING, DENTAL; ADHESIVENESS; BISPHENOL A-GLYCIDYL METHACRYLATE; DENTAL BONDING; DENTIN; DENTIN PERMEABILITY; ETHANOL; HUMANS; HYDROGEN BONDING; HYDROPHOBICITY; MATERIALS TESTING; METHACRYLATES; PERMEABILITY; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SMEAR LAYER; SOLUBILITY; SOLVENTS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; TIME FACTORS; WATER; WETTABILITY;

EID: 57349098168     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.05.004     Document Type: Article

References (39)

1. Bouillaguet S., Duroux B., Ciucchi B., and Sano H. Ability of adhesive systems to seal dentin surfaces: an in vitro study. J Adhes Dent 2 (2000) 201-208
2. Grégoire G., Guignes P., and Millas A. Effects of self-etching adhesives on dentin permeability in a fluid flow model. J Prosthet Dent 93 (2005) 56-63
3. King N.M., Tay F.R., Pashley D.H., Hashimoto M., Ito S., Brackett W.W., et al. Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent 18 (2005) 126-134
4. Yiu C.K., Hiraishi N., Chersoni S., Breschi L., Ferrari M., Prati C., et al. Single-bottle adhesives behave as permeable membranes after polymerisation. II. Differential permeability reduction with an oxalate desensitiser. J Dent 34 (2006) 106-116
5. Carrilho M.R., Tay F.R., Sword J., Donnelly A.M., Agee K.A., Nishitani Y., et al. Dentine sealing provided by smear layer/smear plugs vs. adhesive resins/resin tags. Eur J Oral Sci 115 (2007) 321-329
6. Carrilho M.R., Tay F.R., Donnelly A.M., Agee K.A., Carvalho R.M., Hosaka K., et al. Membrane permeability properties of dental adhesive films. J Biomed Mater Res Part B (Appl Biomater) (2008) [available online]
7. Griffiths B.M., Naasan M., Sherriff M., and Watson T.F. Variable polymerization shrinkage and the interfacial micropermeability of a dentine bonding system. J Adhes Dent 1 (1999) 119-131
8. Griffiths B.M., Watson T.F., and Sherriff M. The influence of dentine bonding systems and their handling characteristics on the morphology and micropermeability of the dentine adhesive interface. J Dent 27 (1999) 63-71
9. Pioch T., Staehle H.J., Duschner H., and Garcia-Godoy F. Nanoleakage at the composite-dentin interface. A review. Am J Dent 14 (2001) 252-258
10. D'Alpino P.H., Pereira J.C., Svizero N.R., Rueggeberg F.A., Carvalho R.M., and Pashley D.H. A new technique for assessing hybrid layer interfacial micromorphology and integrity: two-photon laser microscopy. J Adhes Dent 8 (2006) 279-284
11. Rosales-Leal J.I., Torre-Morena F.J., and Bravo M. Effect of pulp pressure on the micropermeability and sealing ability of etch & rinse and self-etching adhesives. Oper Dent 32 (2007) 242-250
12. Sauro S., Pashley D.H., Montanari M., Chersoni S., Carvalho R.M., Toledano M., et al. Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives. Dent Mater 23 (2007) 705-713
13. Hashimoto M., Tay F.R., Ito S., Sano H., Kaga M., and Pashley D.H. Diffusion-induced water movement within resin-dentin bonds during bonding. J Biomed Mater Res Part B 79B (2006) 453-458
14. Jacobson T., and Söderholm K.J. Some effects of water on dentin bonding. Dent Mater 11 (1995) 132-136
15. Tay F.R., and Pashley D.H. Water treeing-a potential mechanism for degradation of dentin adhesives. Am J Dent 16 (2003) 6-12
16. Tay F.R., and Pashley D.H. Have dentin adhesives become too hydrophilic?. J Can Dent Assoc 69 (2003) 726-731
17. Chersoni S., Suppa P., Grandini S., Goracci C., Monticelli F., Yiu C., et al. In vivo and in vitro permeability of one-step, self-etch adhesives. J Dent Res 83 (2004) 459-464
18. Tay F.R., Pashley D.H., Suh B.I., Carvalho R.M., and Miller M.B. Single-step, self-etch adhesives behave as permeable membranes after polymerisation. I. Bond strength and morphologic evidence. Am J Dent 17 (2004) 271-278
19. Tay F.R., Frankenberger R., Krejci I., Bouillaguet S., Pashley D.H., Carvalho R.M., et al. Single-bottle adhesives behave as permeable membranes after polymerisation. I. In vivo evidence. J Dent 32 (2004) 611-621
20. Tay F.R., Pashley D.H., Suh B.I., Hiriashi N., and Yiu C.K.Y. Water treeing in simplified dentin adhesives-Deja Vu? Buonocore Memorial Lecture. Oper Dent 30 (2005) 561-579
21. Breschi L., Cadenaro M., Antoniolli F., Sauro S., Biasotto M., Prati C., et al. Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability. Dent Mater 23 (2007) 1006-1072
22. Cadenaro M., Antoniolli F., Sauro S., Tay F.R., Di Lenarda R., Contardo L., et al. Degree of conversion and permeability of dental adhesives. Eur J Oral Sci 113 (2005) 1-6
23. Van Landuyt K.L., Snauwaert J., DeMunck J., Coutinho E., Poitevin A., Yoshida Y., et al. Origin of interfacial droplets in one-step adhesives. J Dent Res 86 (2007) 739-744
24. Ito S., Tay F.R., Hashimoto M., Yoshiyama M., Saito T., Brackett W.W., et al. Effects of multiple coatings of two all-in-one adhesives on dentin bonding. J Adhes Dent 7 (2005) 133-141
25. Hashimoto M., Tay F.R., Ito S., Sano H., Kaga M., and Pashley D.H. Permeability of adhesive resin films. J Biomed Mater Res Part B: Appl Biomater 74B (2005) 699-705
26. Nishitani Y., Yoshiyama M., Donnelly A.M., Agee K.A., Sword J., Tay F.R., et al. Effects of resin hydrophilicity on dentin bond strength. J Dent Res 85 (2006) 1016-1021
27. Pashley D.H., and Depew D.D. Effects of the smear layer, Copalite, and oxalate on microleakage. Oper Dent 11 (1986) 95-102
28. Pashley D.H., Carvalho R.M., Pereira J.C., Villaneuva R., and Tay F.R. The use of oxalate to reduce dentin permeability under adhesive restorations. Am J Dent 14 (2001) 89-94
29. Rueggeberg F.A., Hashinger D.T., and Fairhurst C.W. Calibration of FTIR conversion analysis of contemporary dental resin composites. Dent Mater 6 (1990) 241-249
30. Ruyter I.E., and Svendsen S.A. Remaining methacrylate groups in composite restorative materials. Acta Odontol Scand 36 (1978) 75-82
31. Rueggeberg F.A., and Craig R.G. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res 67 (1988) 932-937
32. Eliades G.C., Vougiouklakis G.J., and Caputo A.A. Degree of double bond conversion in light-cured composites. Dent Mater 3 (1987) 19-25
33. Ito S., Hashimoto M., Wadgaonkar B., Svizero N., Carvalho R.M., Yiu C., et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomater 26 33 (2005) 6449-6459
34. Pashley D.H., Tay F.R., Carvalho R.M., Rueggeberg F.A., Agee K.A., Carrilho M., et al. From dry bonding to wet bonding to ethanol-wet bonding: a review of the interactions between dentin matrix and solvated resins using a macromodel of the hybrid layer. Am J Dent 20 (2007) 7-20
35. Dickens S.H., and Cho B.H. Interpretation of bond failures through conversion and residual solvent measurements and Weibull analysis of flexural and microtensile bond strengths of bonding agents. Dent Mater 21 (2005) 354-364
36. Sadek F.T., Pashley D.H., Nishitani Y., Carrilho M.R., Donnelly A., Ferrari M., et al. Application of hydrophobic resin adhesive to acid-etched dentine with an alternative wet bonding technique. J Biomed Mater Res Part A 84A (2008) 19-20
37. Tay F.R., Pashley D.H., Kapur R.R., Carrilho M.R.O., Hur Y.B., Garrett L.V., et al. Bonding BisGMA to dentin-a proof of concept. J Dent Res 96 (2007) 1034-1039
38. Van Landuyt K.L., DeMunck J., Snauwaert J., Coutinho E., Poitevin A., Yoshida Y., et al. Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res 84 (2005) 183-188
39. Spencer P., and Wang Y. Adhesive phase separation at the dentin interface under wet bonding conditions. J Biomed Mater Res 62 (2002) 447-456