Effect of hardness on multiaxial fatigue behaviour and some simple approximations for steels

Fatigue and Fracture of Engineering Materials and Structures

Volumn 32, Issue 8, 2009, Pages 631-646

  Shamsaei, N ^a   Fatemi, Ali ^a  

^a UNIVERSITY OF TOLEDO   (United States)

Author keywords

Hardness effect on fatigue life; Life prediction; Multiaxial fatigue

Indexed keywords

FATIGUE DATA; FATIGUE LIFE; HARDNESS EFFECT ON FATIGUE LIFE; HARDNESS LEVELS; HIGH-CYCLE FATIGUES; IN-PHASE; INCONEL-718; INDUCTION HARDENING; LIFE PREDICTION; LOADING CONDITION; LOW CYCLE FATIGUES; MEDIUM-CARBON STEELS; MODEL-BASED; MULTIAXIAL; MULTIAXIAL FATIGUE; MULTIAXIAL FATIGUE LIFE; OUT OF PHASE; OUT-OF-PHASE LOADING; PREDICTION METHODS; QUENCHING AND TEMPERING; SPECIMEN GEOMETRY; TORSIONAL FATIGUE; TUBULAR SPECIMENS;

CARBON STEEL; FATIGUE TESTING; HARDNESS; LOADING; QUENCHING; STAINLESS STEEL; SUPERALLOYS;

FATIGUE OF MATERIALS;

EID: 67651071698     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2009.01369.x     Document Type: Article

References (26)

1. Murakami, Y. (1989) Effects of small defects and nonmetallic inclusions on the fatigue strength of metals. JSME Int. J., Series I, 32, 167-180.
2. Duckworth, W. E. and Ineson, E. (1963) The effect of externally introduced alumina particles on the fatigue life of EN 24 steel, clean steel. Iron and Steel Institute Special Report: London, Vol. 77, pp. 87-103.
3. Roessle, M. L. and Fatemi, A. (2000) Strain-controlled fatigue properties of steels and some simple approximations. Int. J. Fatigue 22, 495-511.
4. Kim, K. S., Chen, X., Han, C. and Lee, H. W. (2002) Estimation methods for fatigue properties of steels under axial and torsional loading. Int. J. Fatigue 24, 783-793.
5. Marquis, G. and Socie, D. F. (2000) Long-life torsion fatigue with normal mean stresses. Fatigue Fract. Eng. Mater. Struct. 23, 293-300.
6. Tipton, S. M. and Nelson, D. V. (1997) Advances in multiaxial fatigue life prediction for components with stress concentrations. Int. J. Fatigue 19, 503-515.
7. Kurath, P. and Jiang, Y. (1995) Analysis of residual stresses and cyclic deformation for induction hardened components. SAE Technical Paper Series No.: 950707, 337-351.
8. Britten, A. (1994) Fatigue life calculation of surface-strengthened components based on finite element (FE) results: Application of the local strain approach on a two layer model. VDI Berichte, 1153, 61-72.
9. Tjernberg, A. (2002) Fatigue lives for induction hardened shafts with subsurface crack initiation. Eng. Failure Anal. 9, 45-61.
10. Kaufman, R. P. (2002) Static mean stress effects in multiaxial fatigue and their implication on fatigue life predictions of induction hardened shafts cycled in pure torsion. Ph.D. Dissertation. Department of Mechanical Engineering, University of Waterloo, Ontario, Canada.
11. Findley, W. N., Coleman, J. J. and Hanley, B. C. (1956) Theory for combined bending and torsion fatigue with data for SAE 4340 steel. In: Proceedings of The International Conference on Fatigue of Metals, Institute of Mechanical Engineers, London, pp. 150-156.
12. McDiarmid, D. L. (1994) A shear stress based critical plane criterion of multiaxial fatigue failure for design and life prediction. Fatigue Fract. Eng. Mater. Struct. 17, 1475-1485.
13. Brown, M. W. and Miller, K. J. (1973) A theory for fatigue under multiaxial stress-strain conditions. Proc. Instit. Mech. Eng. 187, 745-756.
14. Smith, R. N., Watson, P. P. and Topper, T. H. (1970) A stress-strain parameter for the fatigue of metals. J. Mater. 5, 767-778.
15. Fatemi, A. and Socie, D. F. (1988) A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract. Eng. Mater. Struct. 11, 149-165.
16. Morrow, D. L. (1988) Biaxial-tension fatigue of Inconel 718. Ph.D. Dissertation. Department of Mechanical and Industrial Engineering, University of Illinois, Urbana, IL.
17. Fatemi, A. and Kurath, P. P. (1988) Multiaxial fatigue life prediction under the influence of mean stresses. ASME J. Eng. Mater. Technol. 110, 380-388.
18. Kim, K. S. and Park, J. C. (1999) Shear strain based multiaxial fatigue parameters applied to variable amplitude loading. Int. J. Fatigue 21, 475-483.
19. Park, J. and Nelson, D. (2000) Evaluation of an energy-based approach and a critical plane approach for predicting constant amplitude multiaxial fatigue life. Int. J. Fatigue 22, 23-39.
20. Han, C., Chen, X. and Kim, K. S. (2002) Evaluation of multiaxial fatigue criteria under irregular loading. Int. J. Fatigue 24, 913-922.
21. ASTM Standard E2207-02 (2007) Standard practice for strain-controlled axial-torsional testing with thin walled tube specimens. In: Annual Book of ASTM Standards, American Society for Testing and Materials (ASTM International), West Conshohocken, PA, Vol. 03.01, pp. 1297-1304.
22. Socie, D. F. and Marquis, G. B. (2000) Multiaxial Fatigue. Society of Automotive Engineers, Inc., Warrendale, PA.
23. ASTM Standard E45-05 (2007) Standard test method for determining the inclusion content of steel. In: Annual Book of ASTM Standards, American Society for Testing and Materials (ASTM International), West Conshohocken, PA, Vol. 03.01, pp. 226-244.
24. McClaflin, D. and Fatemi, A. (2004) Torsional deformation and fatigue of hardened steel including mean stress and strain gradient effect. Int. J. Fatigue 26, 773-784.
25. Roessle, M. L. (1998) Correlations among microstructural parameters, tensile data, and fatigue properties for steels. M.Sc. Thesis. Department of Mechanical, Industrial, and Manufacturing Engineering, The University of Toledo, Toledo, OH.
26. Chen, X., An, K. and Kim, K. S. (2004) Low-cycle fatigue of 1Cr-18Ni-9Ti stainless steel and related weld metal under axial, torsional and 90° out-of-phase loading. Fatigue Fract. Eng. Mater. Struct. 27, 439-448.