Effects of pressure-sensitive yielding on stress distributions in crankshaft sections under fillet rolling and bending fatigue tests

International Journal of Fatigue

Volumn 31, Issue 10, 2009, Pages 1588-1597

  Choi, K S ^a   Pan, J ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Bending fatigue test; Crankshaft; Fillet rolling; Mroz hardening rule; Non associated flow rule; Residual stress

Indexed keywords

BENDING FATIGUE TEST; BENDING FATIGUE TESTS; CONSTITUTIVE RELATIONS; CRITICAL LOCATION; CYCLIC LOADING TEST; DRUCKER-PRAGER; EVOLUTION EQUATIONS; EXPERIMENTAL OBSERVATION; FATIGUE CRACK INITIATION; FILLET ROLLING; FINITE ELEMENT ANALYSIS; FINITE ELEMENT MODELS; FINITE ELEMENT PROGRAMS; HARDENING RULES; MONOTONIC AND CYCLIC LOADING; MROZ HARDENING RULE; NON-ASSOCIATED FLOW RULE; PLANE STRAINS; PRESSURE SENSITIVE; PRESSURE SENSITIVE MATERIALS; PRESSURE SENSITIVITIES; STRENGTH-DIFFERENTIAL EFFECTS; STRESS DISTRIBUTION; TWO-DIMENSIONAL PLANES; USER MATERIAL SUBROUTINE; YIELD FUNCTION; YIELD SURFACE;

ANISOTROPY; CAST IRON; CRACKS; CRANKSHAFTS; CYCLIC LOADS; DIFFERENTIAL EQUATIONS; FATIGUE TESTING; FINITE ELEMENT METHOD; HARDENING; HYSTERESIS; HYSTERESIS LOOPS; RESIDUAL STRESSES; STRENGTH OF MATERIALS; STRESS CONCENTRATION; SUBROUTINES; TESTING; TWO DIMENSIONAL;

BENDING TESTS;

EID: 67651005022     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2009.04.007     Document Type: Article

References (30)

1. Chien W.Y., Pan J., Close D., and Ho S. Fatigue analysis of crankshaft sections under bending with consideration of residual stresses. Int J Fatigue 27 (2005) 1-19
2. Spiteri P.V., Lee Y.-L., and Segar R. An exploration of failure modes in rolled, ductile, cast-iron crankshafts using a resonant bending testing rig. SAE Paper 2005-01-1906 (2005), Society of Automotive Engineers, Warrendale (PA)
3. Spiteri P., Ho S., and Lee Y.-L. Assessment of bending fatigue limit for crankshaft sections with inclusion of residual stress. Int J Fatigue 29 (2007) 318-329
4. Choi K.S., Pan J., and Ho S. Effects of roller geometry on contact pressure and residual stress in crankshaft fillet rolling. SAE Paper 2005-01-1908 (2005), Society of Automotive Engineers, Warrendale (PA)
5. Choi K.S., and Pan J. Simulations of stress distributions in crankshaft sections under fillet rolling and bending fatigue tests. Int J Fatigue 31 (2009) 544-557
6. Hibbitt HD, Karlsson BI, Sorensen EP. ABAQUS user manual, Version 6-2; 2001.
7. Fash J., and Socie D.F. Fatigue behavior and mean effects in grey cast iron. Int J Fatigue 4 (1982) 137-142
8. Downing SD. Modeling cyclic deformation and fatigue behavior of cast iron under uniaxial loading, PhD Thesis. Urbana-Champaign: The University of Illinois; 1983.
9. Wang C.H., and Brown M.W. Modelling of the deformation behaviour of flake graphite iron under multi-axial cyclic loading. J Strain Anal Eng Des 29 (1994) 277-288
10. Downing S.D., and Socie D.F. Modelling the cyclic deformation behaviour of gray iron under axial strain. J Soc Environ Eng 22 (1983) 3-11 23
11. Rabold F., and Kuna M. Cell model simulation of void growth in nodular cast iron under cyclic loading. Comput Mater Sci 32 (2005) 489-497
12. Hjelm H.E. Yield surface for grey cast iron under biaxial stress. J Eng Mater Tech 116 (1994) 148-153
13. Josefson B.L., Stigh U., and Hjelm H.E. A nonlinear kinematic hardening model for elastoplastic deformations in grey cast iron. J Eng Mater Tech 117 (1995) 145-150
14. Drucker D.C., and Prager W. Soil mechanics and plastic analysis or limit design. Q Appl Math 10 (1952) 157-165
15. Spitzig W.A., and Richmond O. Effect of hydrostatic pressure on the deformation behavior of polyethylene and polycarbonate in tension and in compression. Polym Eng Sci 19 (1979) 1129-1139
16. Spitzig W.A., and Richmond O. The effect of pressure on the flow stress of metals. Acta Metall 32 (1984) 457-463
17. Richmond O, Spitzig WA. Pressure dependence and dilatancy of plastic flow. In: Rimrott FPJ, Tabarrok B, editors. Proceedings of 15th international congress of theoretical and applied mechanics. Amsterdam, (Netherlands): North-Holland Publishing Co.; 1980. p. 377-86.
18. Brünig M. Numerical simulation of the large elastic-plastic deformation behavior of hydrostatic stress-sensitive solids. Int J Plast 15 (1999) 1237-1264
19. Altenbach H., Stoychev G.B., and Tushtev K.N. On elastoplastic deformation of grey cast iron. Int J Plast 17 (2001) 719-736
20. Stoughton T.B., and Yoon J.-W. A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming. Int J Plast 20 (2004) 705-731
21. Jeong H.-Y., and Pan J. A macroscopic constitutive law for porous solids with pressure-sensitive matrices and its implications to plastic flow localization. Int J Solids Struct 32 (1995) 3669-3691
22. Jeong H.-Y., and Pan J. Crack-tip fields for porous solids with pressure-sensitive matrices and for rubber-modified epoxies. Polym Eng Sci 36 (1996) 2306-2319
23. Stoughton T.B., and Yoon J.-W. Review of Drucker's postulate and the issue of plastic stability in metal forming. Int J Plast 22 (2006) 391-433
24. Choi KS. Residual stress near fillet and roller fatigue in crankshaft fillet rolling process, Ph.D. Thesis. Ann Arbor: The University of Michigan; 2007.
25. Mroz Z. On the description of anisotropic work hardening. J Mech Phys Solids 15 (1967) 163-175
26. Mroz Z. An attempt to describe the behavior of metals under cyclic loads using a more general work hardening model. Acta Mech 7 (1969) 199-212
27. Peirce D., Shih C.F., and Needleman A. A tangent modulus method for rate dependent solids. Comput Struct 18 (1984) 875-887
28. Rice JR. The localization of plastic deformation. In: Koiter WT, editor. Proceedings of 14th international congress of theoretical and applied mechanics. Amsterdam, (Netherlands): North-Holland Publishing Co.; 1976. p. 207-20.
29. Tartaglia J.M., Ritter P.E., Gundlach R.B., and Jenkins L. Monotonic and cyclic property design data for ductile iron castings. SAE Paper 2000-01-0758 (2000), Society of Automotive Engineers, Warrendale (PA)
30. Bhargava V., Hahn G.T., and Rubin C.A. Elastic-plastic finite element model of rolling contact-part 1: analysis of single contacts. J Appl Mech Trans ASME 55 (1985) 67-74