Simulations of stress distributions in crankshaft sections under fillet rolling and bending fatigue tests

International Journal of Fatigue

Volumn 31, Issue 3, 2009, Pages 544-557

  Choi, K S ^a   Pan, J ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Bending fatigue test; Crankshaft fillet rolling; Kinematic hardening rule; Mroz hardening rule; Residual stress

Indexed keywords

ABAQUS; ABS RESINS; ANISOTROPY; BENDING (DEFORMATION); BENDING TESTS; CONDUCTIVE PLASTICS; CRACKS; CRANKSHAFTS; DIFFERENTIAL EQUATIONS; FATIGUE TESTING; FINITE ELEMENT METHOD; IMAGE SEGMENTATION; KINEMATICS; RESIDUAL STRESSES; ROLLING; STRENGTH OF MATERIALS; STRESS CONCENTRATION; STRESSES; SURFACES; TESTING; TWO DIMENSIONAL;

A CRANKSHAFTS; BENDING FATIGUE LIMITS; BENDING FATIGUE TEST; BENDING FATIGUE TESTS; BENDING STRESSES; CONSTITUTIVE RELATIONS; CRITICAL LOCATIONS; DRIVING FORCES; EVOLUTION EQUATIONS; EXPERIMENTAL OBSERVATIONS; FATIGUE CRACK INITIATIONS; FINITE ELEMENT ANALYSIS; FINITE ELEMENT MODELS; HARDENING RULES; HOOP STRESSES; KINEMATIC HARDENING RULE; MONOTONIC AND CYCLIC LOADINGS; MROZ HARDENING RULE; NONLINEAR KINEMATIC HARDENINGS; PLANE STRAINS; PLASTIC RESPONSES; RATE DEPENDENTS; SENSITIVE MATERIALS; STRAIN RANGES; STRESS DISTRIBUTIONS; STRESS STRAINS; SURFACE MODELS; TANGENT MODULUS; USER MATERIAL SUBROUTINES; YIELD FUNCTIONS; YIELD SURFACES;

HARDENING;

EID: 56249104143     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2008.03.035     Document Type: Article

References (52)

1. Choi KS, Pan J. A generalized anisotropic hardening rule based on the Mroz multi-yield-surface model for pressure insensitive and sensitive materials [in preparation].
2. Peirce D., Shih C.F., and Needleman A. A tangent modulus method for rate dependent solids. Comput Struct 18 (1984) 875-887
3. Love RJ, Waistall DN. The improvement in the bending fatigue strength of production crankshafts by cold rolling. M.I.R.A. Report No. 1954/1; 1954. p. 1-8.
4. Henry J, Toplosky J, Abramczuk M. Crankshaft durability prediction - a new 3-D approach. SAE Technical Paper 920087. Warrendale (PA): Society of Automotive Engineers; 1992.
5. Guagliano M., Terranova A., and Vergani L. Theoretical and experimental study of the stress concentration factor in diesel engine crankshafts. J Mech Design Trans ASME 115 (1993) 47-52
6. Guagliano M., and Vergani L. A simplified approach to crack growth prediction in a crankshaft. Fatigue Fract Eng Mater Struct 17 (1994) 1295-1306
7. Taylor D., Ciepalowicz A.J., Rogers P., and Devlukia J. Prediction of fatigue failure in a crankshaft using the technique of crack modelling. Fatigue Fract Eng Mater Struct 20 (1997) 13-21
8. Taylor D., Zhou W., Ciepalowicz A.J., and Devlukia J. Mixed-mode fatigue from stress concentrations: an approach based on equivalent stress intensity. Int J Fatigue 21 (1999) 173-178
9. Kamimura T. Effects of fillet rolling on fatigue strength of ductile cast iron crankshaft. SAE Technical Paper 852204. Warrendale (PA): Society of Automotive Engineers; 1985.
10. Maluf O., Milan M.T., and Spinelli D. Effects of surface rolling on fatigue behavior of a pearlitic ductile cast iron. J Mater Eng Perform 13 (2004) 195-199
11. Kloos K.H., Fuchsbauer B., and Adelmann J. Fatigue properties of specimens similar to components deep rolled under optimized conditions. Int J Fatigue 9 (1987) 35-42
12. Richards MD, Matlock DK, Speer JG. Deep rolling response of notched medium carbon bar steels. SAE Technical Paper 2004-01-1528. Warrendale (PA): Society of Automotive Engineers; 2004.
13. Courtin S, Henaff-Gardin C, Bezine G. Finite element simulation of roller burnishing in crankshafts. In: Brebbia CA, de Hosson JTM, Nishidas SI, editors. Proceedings of sixth international conference on computer methods and experimental measurements for surface treatment effects. WIT Press, Southampton, UK; 2003, p. 333-42.
14. Gardin C., Courtin S., Bezine G., and Bertheau D. Crack propagation in compressive residual stress fields of crankshafts: experimental study and numerical simulation. Comput Methods Exp Measur Surf Effects Contact Mech VII, WIT Trans Eng Sci 49 (2005) 231-240
15. Chien W.Y., Pan J., Close D., and Ho S. Fatigue analysis of crankshaft sections under bending with consideration of residual stresses. Int J Fatigue 27 (2005) 1-19
16. Spiteri PV, Lee Y-L, Segar R. An exploration of failure modes in rolled, ductile, cast-iron crankshafts using a resonant bending testing rig. SAE Technical Paper 2005-01-1906. Warrendale (PA): Society of Automotive Engineers; 2005.
17. Spiteri P., Ho S., and Lee Y.-L. Assessment of bending fatigue limit for crankshaft sections with inclusion of residual stress. Int J Fatigue 29 (2007) 318-329
18. Choi KS, Pan J, Ho S. Effects of roller geometry on contact pressure and residual stress in crankshaft fillet rolling. SAE Technical Paper 2005-01-1908. Warrendale (PA): Society of Automotive Engineers; 2005.
19. Druschitz AP, Fitzgerald DC, Hoegfeldt I. Lightweight crankshafts. SAE Technical Paper 2006-01-0016. Warrendale (PA): Society of Automotive Engineers; 2006.
20. Drucker D.C., and Prager W. Soil mechanics and plastic analysis or limit design. Quart Appl Math 10 (1952) 157-165
21. Hjelm H.E. Yield surface for grey cast iron under biaxial stress. J Eng Mater Tech 116 (1994) 148-153
22. Josefson B.L., Stigh U., and Hjelm H.E. A nonlinear kinematic hardening model for elastoplastic deformations in grey cast iron. J Eng Mater Tech 117 (1995) 145-150
23. Prager W. The theory of plasticity - a survey of recent achievements. Proc Inst Mech Eng 169 (1955) 41-57
24. Ziegler H. A modification of Prager's hardening rule. Quart Appl Math 17 (1959) 55-65
25. Armstrong PJ, Frederick CO. A mathematical representation of the multiaxial Bauschinger effect. C.E.G.B. Report RD/B/N 731; 1966.
26. Mroz Z. On the description of anisotropic workhardening. J Mech Phys Solids 15 (1967) 163-175
27. Dafalias Y.F., and Popov E.P. Plastic internal variables formalism of cyclic plasticity. J Appl Mech 43 (1976) 645-651
28. Chaboche J.L. Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of metals. Bull de l' Acad Polonaaise des Sciences Sévie Sc et Techn 25 (1977) 33-42
29. Chaboche J.L. Time independent constitutive theories for cyclic plasticity. Int J Plasticity 2 (1986) 149-188
30. Mroz Z. An attempt to describe the behavior of metals under cyclic loads using a more general workhardening model. Acta Mech 7 (1969) 199-212
31. Lamba H.S., and Sidebottom O.M. Cyclic plasticity for nonproportional paths: Part 1 - cyclic hardening, erasure of memory, and subsequent strain hardening experiments. J Eng Mater Tech 100 (1978) 96-103
32. Lamba H.S., and Sidebottom O.M. Cyclic plasticity for nonproportional paths: Part 2 - comparison with predictions of three incremental plasticity models. J Eng Mater Tech 100 (1978) 104-111
33. Krieg R.D. A practical two surface plasticity theory. J Appl Mech 42 (1975) 641-646
34. Dafalias Y.F., and Popov E.P. A model of nonlinearly hardening materials for complex loading. Acta Mech 21 (1975) 173-192
35. Mroz Z., Norris V.A., and Zienkiewicz O.C. An anisotropic, critical state model for soils subject to cyclic loading. Géotechnique 31 (1981) 451-469
36. Tseng N.T., and Lee G.C. Simple plasticity model of two-surface type. J Eng Mech 109 (1983) 795-810
37. Chu C.C. A three-dimensional model of anisotropic hardening in metals and its application to the analysis of sheet metal formability. J Mech Phys Solids 32 (1984) 197-212
38. Chu C.C. The analysis of multiaxial cyclic problems with an anisotropic hardening model. Int J Solids Struct 23 (1987) 569-579
39. McDowell D.L. A two surface model for transient nonproportional cyclic plasticity: Part 1 - development of appropriate equations. J Appl Mech 52 (1985) 298-302
40. McDowell D.L. A two surface model for transient nonproportional cyclic plasticity: Part 2 - comparison of theory with experiments. J Appl Mech 52 (1985) 303-308
41. Chang K.C., and Lee G.C. Constitutive relations of structure steel under nonproportional loading. J Eng Mech 112 (1986) 806-820
42. Lu W.Y., and Mohamed Z.M. A two-surface theory and its application to multiaxial loading. Acta Mech 69 (1987) 43-57
43. Takahashi T., and Ogata T. Description of nonproportional cyclic plasticity of stainless steel by a two-surface model. J Appl Mech 58 (1991) 623-630
44. Lee Y.-L., Chiang Y.J., and Wong H.-H. A constitutive model for estimating multiaxial notch strains. J Eng Mater Tech 117 (1995) 33-40
45. Chen X., and Abel A. A two-surface model describing ratchetting behaviors and transient hardening under nonproportional loading. Acta Mech Sin 12 (1996) 368-376
46. Chiang D.-Y., and Beck J.L. A transformation method for implementing classical multi-yield-surface theory using the hardening rule of Mroz. Int J Solids Struct 33 (1996) 4239-4261
47. Montans F.-J. Bounding surface plasticity model with extended Masing behavior. Comput Methods Appl Mech Eng 182 (2000) 135-162
48. Sakane M., Itoh T., and Chen X. A simple inelastic constitutive model for evaluation of stable cyclic stress response under nonproportional straining. ASME Pressure Vessel Piping Div Publ PVP 439 (2002) 73-82
49. Khan A.S., and Huang S. Continuum theory of plasticity (1995), John Wiley & Sons Inc.
50. Hibbitt HD, Karlsson BI, Sorensen EP. ABAQUS user manual, version 6-2; 2001.
51. Tartaglia JM, Ritter PE, Gundlach RB, Jenkins L. Monotonic and cyclic property design data for ductile iron castings. SAE Paper 2000-01-0758. Warrendale (PA): Society of Automotive Engineers; 2000.
52. Yu V, Chien WY, Choi KS, Pan J, Close D. Testing and modeling of frequency drops in resonant bending fatigue tests of notched crankshaft sections. SAE Paper 2004-01-1501. Warrendale (PA): Society of Automotive Engineers; 2004.