Optimization of the cutting edge geometry of coated carbide tools in dry turning of steels using a finite element analysis

Machining Science and Technology

Volumn 13, Issue 1, 2009, Pages 36-51

  Al Zkeri, I ^a   Rech, J ^b   Altan, T ^c   Hamdi, H ^b   Valiorgue, F ^b  

^a RIYADH COLLEGE OF TECHNOLOGY   (Saudi Arabia)

^b LABORATOIRE DE TRIBOLOGIE ET DYNAMIQUE DES SYSTÈMES   (France)

^c OHIO STATE UNIVERSITY   (United States)

Author keywords

Carbide tools; Coating; Cutting edge geometry; Orthogonal turning

Indexed keywords

ALLOY STEEL; COATED CARBIDE TOOLS; COATED CUTTING TOOLS; COATED TOOLS; COATING LAYER; COMPLEX GEOMETRIES; CUTTING EDGE GEOMETRY; CUTTING EDGES; CUTTING FORCES; CUTTING MECHANICS; CUTTING SIMULATION; DRY TURNING; EDGE DESIGNS; EXPERIMENTAL STUDIES; FINITE ELEMENT; FINITE ELEMENT ANALYSIS; LAGRANGIAN; ON CHIPS; ORTHOGONAL CUTTING; ORTHOGONAL TURNING; STRESS DISTRIBUTION; THIN-WALLED; TOOL COATING; TOOL STRESS;

CARBIDE CUTTING TOOLS; CARBIDES; COATINGS; COMPUTATIONAL GEOMETRY; CUTTING MACHINES (MINING); FINITE ELEMENT METHOD; OPTIMIZATION; STRESS CONCENTRATION; TOOL STEEL; TURNING;

CUTTING TOOLS;

EID: 67650869978     PISSN: 10910344     EISSN: 15322483     Source Type: Journal    
DOI: 10.1080/10910340902776051     Document Type: Article

References (21)

1. Albrecht, P. (1960) New developments in the theory of metal cutting process. Transactions of the ASME, Journal of Engineering for Industry, Series B, 82: 348-358.
2. Bouzakis, K.D.; Michailidis, N.; Skordaris, G.; Kombogiannis, S.; Hadjiyiannis, S.; Efstathiou, K.; Erkens, G.; Rambadt, S.; Wirth, I. (2002) Effect of cutting edge radius and its manufacturing procedure, on the milling performance of PVD coated cemented carbide inserts. Annals of the CIRP, 51/1: 61-64.
3. Bouzakis, K.D.; Vidakis, N.; Kallinikidis, D.; Leyendecker, T; Erkens, G; Wenke, R.; Fuss, H.G. (1998) Fatigue failure mechanisms of multi- and monolayer physically vapour deposited coatings in interrupted cutting processes. Surface and Coalings Technology, 108-109: 526-534.
4. Bradbury, S.R.; Huyanan, T. (2000) Challenges facing surface engineering technologies in the cutting tool industry. Vacuum, 56: 173-177. (Pubitemid 30564469)
5. Chen, Y.R.; Ni, J. (1998) Finite element analysis of orthogonal cutting with blunt-edge tool. Proc. ASME Manufacturing Science and Engineering, MED-8: 853-866.
6. Derrico, G.E.; Bugliosi, S.; Guglielmi, E. (1998) Tool-life of cermet inserts in milling tests. Journal of Materials Processing Technology, 77: 337-343.
7. Fang, N. (2003a) Slip-line modelling of machining with a rounded-edge tool - Part 1: new-model and theory. Journal of the Mechanics and Physics of Solids, 51: 715-742.
8. Fang, N. (2003b) Slip-line modelling of machining with a rounded-edge tool - Part 2: analysis of the size-effect and the shear strain-rate. Journal of the Mechanics and Physics of Solids, 51: 743-762.
9. Grolleau, V. (1996) Approche de la validation expérimentale des simulations numériques de la coupe avec prise en compte des phénomènes locaux à l'arête de l'outil. Ph.D. Dissertation, Nantes, France.
10. Kim, K.W.; Lee, W.Y; Sin, H.C. (1999) A finite-element analysis of machining with the tool edge considered. Journal of Materials Processing and Technology, 86: 45-55. (Pubitemid 128350056)
11. Klocke, F.; Raedt, H.-W.; Hoppe, S. (2001) 2D-FEM Simulation of the orthogonal high speed cutting process. Proceedings of the 4th CIRP International Workshop on Modeling of machining operations, Delft, the Netherlands, August 17-18: 117-124.
12. Merchant, M.E. (1945) Mechanics of the metal cutting process: orthogonal cutting and the type two chip. Journal of Applied Physics, 16: 267-275.
13. Rech, J.; Yen, Y.C.; Schaff, MJ.; Hamdi, H.; Altan, T.; Bouzakis, K.D. (2005) Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts. Wear, 259: 1168-1176. (Pubitemid 40759005)
14. Schimmel, R.J.; Endres, W.J.; Stevenson, R. (2002) Application of an internally consistent material model to determine the effect of tool edge geometry in orthogonal machining. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 124: 536-543. (Pubitemid 35202575)
15. Shatla, M. (1999) Prediction of forces, stresses, temperatures and tool wear in metal cutting. Ph.D. Dissertation, The Ohio State University, Columbus, Ohio.
16. Shatla, M.; Yen, Y.C.; Altan, T. (2000) Tool-workpiece interface in orthogonal cutting - application of FEM modelling. Trans. NAMRI/SME XXVIII, 173-178.
17. Thiele, J.D.; Melkote, S.N. (2000) Effect of tool edge geometry on workpiece subsurface deformation and through-thjckness residual stresses for hard turning of AISI 52100 steel. Journal of Manufacturing Processes, 2(3): 270-276.
18. Tõnshoff, H.K.; Mohlfeld, A.; Spengler, C.; Podolsky, C. (1999) PVD coated tools for metal cutting applications, International conference 'The Coatings', Thessaloniki (Greece), 14-15th October: 1-20.
19. Yen, Y.-C.; Anurag, J.; Altan, T. (2003a) A finite element analysis of orthogonal machining using different tool edge geometries, fournal of Materials Processing Technology, 146: 72-81.
20. Yen, Y.-C.; Jain, A.; Chigurupati, P.; Wu, W.-T.; Altan, T. (2003b) Computer simulation of orthogonal cutting using a tool with multiple coatings. Proceedings of the 6th CIRP International Workshop on Modeling of Machining Operations, The McMaster University, Hamilton, Canada, May 20, 2003.
21. Yen, Y.-C.; Söhner, J.; Weule, H.; Schmidt, J.; Altan, T. (2002) Estimation of tool wear of carbide tool in orthogonal cutting using FEM simulation. Machining Science and Technology, 6(3): 467-486.