Leaching of copper oxide with different acid solutions

Chemical Engineering Journal

Volumn 152, Issue 2-3, 2009, Pages 503-508

  Habbache, N ^a   Alane, N ^a   Djerad, S ^a   Tifouti, L ^a  

^a BADJI MOKHTAR UNIVERSITY   (Algeria)

Author keywords

Citric acid; Copper oxide; Corundum; Dissolution rate; Inorganic acids

Indexed keywords

ACID CONCENTRATIONS; ACID SOLUTIONS; CITRIC ACID SOLUTION; DISSOLUTION KINETICS; DISSOLUTION RATE; DISSOLUTION RATES; HETEROGENEOUS MODELS; OPERATION CONDITIONS; STIRRING SPEED; SURFACE CHEMICALS;

BATCH REACTORS; CITRIC ACID; COPPER; COPPER OXIDES; CORUNDUM; HEMATITE; INORGANIC ACIDS; INORGANIC COMPOUNDS; LEACHING; SURFACE REACTIONS;

DISSOLUTION;

EID: 67649604573     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2009.05.020     Document Type: Article

References (20)

1. Demir F., Laçin O., and Dönmez B. Leaching kinetics of calcined magnesite in citric acid solutions. Ind. Eng. Chem. Res. 45 (2006) 1307-1311
2. Halim C.E., Scott J.A., Natawardaya H., Amal R., Beydoun D., and Low G. Comparison between acetic acid and landfill leachates for the leaching of Pb(II), Cd(II), As(V), and Cr(VI) from cementitious wastes. Environ. Sci. Technol. 38 (2004) 3977-3983
3. Alkan M., and Dogan M. Dissolution kinetics of colemanite in oxalic acid solutions. Chem. Eng. Process. 43 (2004) 867-872
4. Armbruster U., Martin A., and Krepel A. Hydrolysis and oxidative decomposition of ethyl acetate in sub- and super-critical water. Appl. Catal. B: Environ. 31 (2001) 263-273
5. Wang Z., Xi J., Wang W., and Lu G. Selective production of hydrogen by partial oxidation of methanol over Cu/Cr catalysts. J. Mol. Catal. A: Chem. 191 (2003) 123-134
6. 3 catalysts prepared by co-precipitation method. J. Mol. Catal. A: Chem. 176 (2001) 141-150
7. Taylor S.H., Hutchings G.J., and Mirzaei A.A. Copper zinc oxide catalysts for ambient temperature carbon monoxide oxidation. Chem. Commun. (1999) 1373-1374
8. 2 from flue gases. Ind. Eng. Chem. Res. 39 (2000) 3868-3874
9. P.R. Kruesi, V.H. Frahm, Process for the recovery of copper from its ores, US Patent No. 4,324,582 (1982).
10. Oishi T., Koyama K., Alam S., Tanaka M., and Lee J.C. Recovery of high purity copper cathode from printed circuit boards using ammoniacal sulfate or chloride solutions. Hydrometallurgy 89 (2007) 82-88
11. Habashi F. Trends in the hydrometallurgical treatment of copper oxide ores. Arab Min. J. 4 (1983) 46-52
12. F.A. Forward, A. Peters, Leaching, vol. 2, SME Mineral Processing Handbook, Seeley W. Mudd Series, New York, 1985, pp. 13.12-13.6.
13. 4 solutions. Chem. Eng. Technol. 24 (2001) 409-413
14. Senanayake G. Review of theory and practice of measuring proton activity and pH in concentrated chloride solutions and application to oxide leaching. Miner. Eng. 20 (2007) 634-645
15. Al-Mansi N.M., and Monem N.M.A. Recovery of nickel oxide from spent catalyst. Waste Manag. 22 (2002) 85-90
16. N. Glinka, Chimie Générale, vol. 2, Editions Mir, Moscou, 1987, p. 234.
17. Levenspiel O. Chemical Reaction Engineering. 3rd ed. (1999), John Wiley & Sons, New York p. 570
18. Scendo M. The influence of adenine on corrosion of copper in chloride solutions. Corrosion Sci. 50 (2008) 2070-2077
19. p reinforced 6061-Al metal matrix composite: a correlation between electrochemical studies and atomic force microscopy. Corrosion Sci. 50 (2008) 2658-2668
20. Scendo M. Inhibition of copper corrosion in sodium nitrate solutions with nontoxic inhibitors. Corrosion Sci. 50 (2008) 1584-1592