Analysis of stamping performances of dual phase steels: A multi-objective approach to reduce springback and thinning failure

Materials and Design

Volumn 30, Issue 10, 2009, Pages 4421-4433

  Ingarao, G ^a   Lorenzo, R Di ^a   Micari, F ^a  

^a UNIVERSITY OF PALERMO   (Italy)

Author keywords

Dual phase steels; Sheet stamping optimization; Springback

Indexed keywords

ADVANCED HIGH STRENGTH STEEL; AUTOMOTIVE COMPONENT; BLANK HOLDER FORCES; DESIGN VARIABLES; DUAL PHASE; DUAL PHASE STEELS; DUAL-PHASE STEEL; FRICTION CONDITIONS; GEOMETRICAL ASPECTS; GEOMETRICAL DISTORTION; HIGH MECHANICAL PROPERTIES; LIGHT WEIGHT ALLOYS; LIGHTWEIGHT COMPONENTS; MATERIAL BEHAVIOR; MILD STEEL; MINIMIZATION PROBLEMS; MULTI OBJECTIVE; NEW MATERIAL; NUMERICAL SIMULATION; PARETO OPTIMAL SOLUTIONS; PROCESS CONDITION; RESEARCH EFFORTS; RESPONSE SURFACE METHODOLOGY; SEARCH TECHNIQUE; SHEET STAMPING OPTIMIZATION; SPRINGBACK; STAMPING OPERATIONS;

COMPUTER SIMULATION; DYNAMIC POSITIONING; FORMABILITY; MATHEMATICAL MODELS; MECHANICAL PROPERTIES; MULTIOBJECTIVE OPTIMIZATION; PERCOLATION (SOLID STATE); QUALITY ASSURANCE; STAMPING;

STEEL SHEET;

EID: 67649408779     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.04.001     Document Type: Article

References (41)

1. Kim S.-J., Cho Y.-G., Oh C.-S., Kim D.E., Moon M.B., and Han H.N. Development of a dual phase steel using orthogonal design method. Mater Des 30 (2009) 1251-1257
2. Shan T.K., Li S.H., Zhang W.G., and Xu Z.G. Prediction of martensitic transformation and deformation behavior in the TRIP steel sheet forming. Mater Des 29 (2008) 1810-1816
3. Caballero F.G., Santofimia M.J., García-Mateo C., Chao J., and García de Andrés C. Theoretical design and advanced microstructure in super high strength steels. Mater Des 30 (2009) 2077-2083
4. Kim H., Altan T., and Yan Q. Evaluation of stamping lubricants in forming advanced high strength steels (AHSS) using deep drawing and ironing tests. J Mater Proc Technol 8 (2008) 4122-4133
5. Zhang X., Chen G., Zhang Y., and Lai X. Improvement of resistance spot weldability for dual-phase (DP600) steels using servo gun. J Mater Proc Technol 209 (2008) 2671-2675
6. Fei D., and Hodgson P. Experimental and numerical studies of springback in air V-bending process for cold rolled TRIP steels. Nucl Eng Des 236 (2006) 1847-1851
7. Banu M., Takamura M., Hama T., Naidim O., Teodosiu C., and Makinouchi A. Simulation of springback and wrinkling in stamping of dual phase steel rail-shaped part. J Mater Proc Technol 173 (2006) 178-184
8. Gomes C., Onipede O., and Lovell M. Investigation of springback in high strength anisotropic steels. J Mater Proc Technol 159 (2005) 91-98
9. Asgari S.A., Pereira M., Rolfe B.F., Dingle M., and Hodgson P.D. Statistical analysis of finite element modeling in sheet metal forming and springback analysis. J Mater Proc Technol 203 (2008) 129-136
10. Chen P., and Koc M. Simulation of springback variation in forming of advanced high strength steels. J Mater Proc Technol 190 (2007) 189-198
11. Wagoner RH. Fundamental aspects of springback in sheet metal forming. In: Proceedings of numisheet conference, Jejv Island, Korea, 21-25 October; 2002. p. 13-24.
12. Narasimhan N., and Lovell M. Predict springback in sheet metal forming: an explicit to implicit sequential solution procedure. J Mater Proc Technol 33 (1999) 29-42
13. Li K., Carden W.P., and Wagoner R.H. Simulation of springback. Int J Mech Sci 44 (2002) 103-112
14. Xu W.L., Ma C.H., Li C.H., and Feng W.J. Sensitive factors in springback simulation for sheet metal forming. J Mater Proc Technol 151 (2004) 217-222
15. Lee S.W., and Yang D.Y. An assessment of numerical parameter influencing springback in explicit finite element analysis of sheet metal forming processes. J Mater Proc Technol 80-81 (1998) 60-67
16. Wagoner R.H., and Li M. Simulation of springback: Through-thickness integration. Int J Plast 23 (2007) 345-350
17. Ragai I., Lazim D., and Nemes J.A. Anisotropy and springback in draw-bending of stainless steel 410: experimental and numerical study. J Mater Proc Technol 166 (2005) 116-127
18. Wagoner eng R.H. Role of plastic anisotropy and its evolution on springback. Int J Mech Sci 44 (2004) 123-148
19. Liu G., Lin Z., and Bao Y. Improving dimensional accuracy of a u-shaped part through an orthogonal design experiment. Finite Elem Anal Des 39 (2002) 107-118
20. Pepelux L., and Ponthot J.P. Finite element simulation of springback in sheet metal forming. J Mater Proc Technol 125 (2002) 785-791
21. Geng L., and Wagoner R.H. Die design method for sheet springback. Int J Mech Sci 66 (2004) 1097-1113
22. Lan F. A method of constructing smooth tool surfaces for FE prediction of springback in sheet metal forming. J Mater Proc Tech 17 (2006) 382-385
23. Naceur H., Ben-Elechi S., Batoz J.L., and Knopf-Lenoir C. Response surface methodology for the rapid design of aluminum sheet metal forming parameters. Mater Des 29 (2008) 781-790
24. Naceur H., Guo Y.Q., and Ben-Elechi S. Response surface methodology for design of sheet forming parameters to control springback effects. Comput Struct 84 (2006) 1651-1663
25. Kazan R., Fi{dotless}rat M., and Tiryaki A.E. Prediction of springback in wipe-bending process of sheet metal using neural network. Mater Des 30 (2009) 418-423
26. We L., and Yuying Y. Multi-objective optimization of sheet metal forming process using Pareto-based genetic algorithm. J Mater Proc Tech 208 (2008) 499-506
27. Zhang W., and Shivpuri R. Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture. Reliab Eng Syst Safe 94 (2009) 152-161
28. Shivpuri R., and Zhang W. Robust design of spatially distributed friction for reduced wrinkling and thinning failure in sheet drawing. Mater Des 30 (2008) 2043-2055
29. Katayama T., Nakamachi E., Nakamura Y., Ohata T., Morishita Y., and Murase H. Development of process design system for press forming - multi-objective optimization of intermediate die shape in transfer forming. J Mater Process Technol 155-156 (2004) 1564-1570
30. Wei L., and Yuying Y. Multi-objective optimization of an auto panel drawing die face design by mesh morphing. Comput Aided Des 39 (2007) 863-879
31. Shabeer S., and Wang M. Multi-objective optimization of sequential brakeforming processes. J Mater Process Technol 102 (2000) 266-276
32. Gaitonde V.N., Karnik S.R., Achyutha B.T., and Siddeswarappa B. Taguchi optimization in drilling of AISI 316L stainless steel to minimize burr size using multi-performance objective based on membership function. J Mater Process Technol 202 (2008) 374-379
33. Wei L., Yuying Y., Zhongwen X., and Lihong Z. Springback control of sheet metal forming based on the response-surface method and multi-objective genetic algorithm. Mater Sci Eng A 499 (2009) 325-338
34. Fratini L., Ingarao G., and Micari F. On the springback prediction in 3d sheet metal forming processes. Steel Res Int 79 (2008) 77-83
35. Fratini L, Ingarao G, Micari F, Lo Franco A. Numerical prediction of elastic springback in an automotive complex structural part. NUMIFORM. Giugno, Porto; 2007, 17-21. pp. 425-30.
36. Barlat F., and Lian F.J. Plastic behaviour and stretchability of sheet metal Part 1. A yield function for orthotropic sheets under plane stress conditions. Int J Plast 5 (1989) 51-66
37. Wu P.D., Graf A., MacEwen S.R., Lloyd D.J., Jain M., and Neale K.W. On forming limit stress diagram analysis. Int J Solid Struct 42 (2005) 2225-2241
38. Deb K. Multiobjective optimization using evolutionary algorithms (2001), John Wiley & Sons ltd, New York
39. Marler R.T., Kim C.H., and Arora J.S. System identification of simplified crash models using multi-objective optimization. Comput Methods Appl Mech Eng 195 (2006) 4383-4395
40. Myers R.H., and Montgomery D.C. Response surface methodology process and product optimization using designed experiments. 2nd ed. (2002), John Wiley and Sons, Inc., New York, USA
41. Inci B., and Semra T. Small response surface designs for metamodel estimation. Eur J Oper Res 145 (2003) 455-460