Air plasma spray processing and electrochemical characterization of Cu-SDC coatings for use in solid oxide fuel cell anodes

Journal of Power Sources

Volumn 193, Issue 2, 2009, Pages 454-461

  Benoved, Nir ^a   Kesler, O ^b  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^b UNIVERSITY OF TORONTO   (Canada)

Author keywords

Cu SDC based anodes; Plasma spraying; Solid oxide fuel cells (SOFCs)

Indexed keywords

AIR PLASMA SPRAY; AIR PLASMA SPRAYING; CU-SDC BASED ANODES; ELECTROCHEMICAL CHARACTERIZATIONS; IN-SITU; INTEGRATED PROCESS; PLASMA CONDITIONS; PLASMA GAS COMPOSITION; PLASMA TEMPERATURE; POLARIZATION RESISTANCES; POROUS COMPOSITES; POROUS SUBSTRATES; SEM; SOLID OXIDE FUEL CELL ANODES; SURFACE AREA;

ANODES; CELL MEMBRANES; CERIUM; CERIUM COMPOUNDS; CHEMICAL ANALYSIS; COPPER OXIDES; ELECTROCHEMISTRY; HYDROGEN; MICROSTRUCTURE; NICKEL OXIDE; PLASMA JETS; PLASMA SPRAYING; PLASMAS; POWDERS; PROTECTIVE COATINGS; REDUCTION; SOLID OXIDE FUEL CELLS (SOFC);

COMPOSITE COATINGS;

EID: 67649407284     PISSN: 03787753     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jpowsour.2009.04.003     Document Type: Article

References (27)

1. Larminie J., and Dicks A. Fuel Cells Systems Explained (2000), Wiley Chichester pp. 192-193
2. Peters R., Dahl R., Klüttgen U., Palm C., and Stolten D. J. Power Sources 106 (2002) 238-244
3. Gorte R.J., Park S., Vohs J.M., and Wang C. Adv. Mater. 12 19 (2000) 1465-1469
4. Molenda J., Swierczek K., and Zajac W. J. Power Sources 173 (2007) 657-670
5. Mclntosh S., and Gorte R.J. Chem. Rev. 104 (2004) 4845-4865
6. Eguchi K., Kojo H., Takeguchi T., Kikuchi R., and Sasaki K. Solid State Ionics 152-153 (2002) 411-416
7. Maček J., Novosel B., and Marinšek M. J. Eur. Ceram. Soc. 27 (2007) 487-491
8. Park S., Gorte R.J., and Vohs J.M. Appl. Catal. A: Gen. 200 (2000) 55-61
9. Gorte R.J., Kim H., and Vohs J.M. J. Power Sources 106 (2002) 10-15
10. Lu C., Worrell W.L., Vohs J.M., and Gorte R.J. J. Electrochem. Soc. 150 10 (2003) A1357-A1359
11. Zhao S., and Gorte R.J. Appl. Catal. A: Gen. 277 (2004) 129-136
12. Gross M.D., Vohs J.M., and Gorte R.J. J. Mater. Chem. 17 (2007) 3071-3077
13. Ma X.Q., Zhang H., Dai J., Roth J., Hui R., Xiao T.D., and Reisner D.E. J. Therm. Spray Technol. 14 1 (2005) 61-66
14. Schiller G., Henne R., Lang M., and Muller M. Fuel Cell 4 1-2 (2004) 56-61
15. Kim S., Kwon O., Kumar S., Xiong Y., and Lee C. Surf. Coat. Technol. 202 (2008) 3180-3186
16. Hui R., Wang Z., Kesler O., Rose L., Jankovic J., Yick S., Maric R., and Ghosh D. J. Power Sources 170 (2007) 308-323
17. Henne R. J. Therm. Spray Technol. 16 3 (2007) 381-403
18. Hwang C., and Yu C. Surf. Coat. Technol. 201 12 (2007) 5954-5959
19. Iwaszko J., and Nitkiewicz Z. Mater. Manuf. Process. 17 2 (2002) 169-176
20. Lee S., Vohs J.M., and Gorte R.J. J. Electrochem. Soc. 151 9 (2004) A1319-A1323
21. Benyoucef A., Klein D., Coddet C., and Benyoucef B. Surf. Coat. Technol. 202 (2008) 2202-2207
22. Ben-Oved N., and Kesler O. Adv. Mater. Res. vols. 15-17 (2007) 287-292
23. Lee J.H., Moon H., Lee H.-W., Kim J., Kim J.-D., and Yoon K.-H. Solid State Ionics 148 (2002) 15-26
24. Lang M., Franco T., Schiller G., and Wagner N. J. Appl. Electrochem. 32 (2002) 871-874
25. White B.D., Kesler O., and Rose L. J. Power Sources 178 (2008) 334-343
26. Waldbillig D., and Kesler O. Surf. Coat. Technol. 203 (2009) 2098-2101
27. Zhang, Li C.-J., Zhang G., Ning X.-J., Li C.-X., Liao H., and Coddet C. Mater. Sci. Eng. B 137 (2007) 24-30