A fracture-based model for FRP debonding in strengthened beams

Engineering Fracture Mechanics

Volumn 76, Issue 12, 2009, Pages 1897-1909

  Gunes, Oguz ^a   Buyukozturk, Oral ^b   Karaca, Erdem ^c  

^a ATILIM UNIVERSITY   (Turkey)

^b MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

^c Swiss Reinsurance America Corporation   (United States)

Author keywords

Beams; Debonding; Fracture; FRP; Strengthening

Indexed keywords

ANALYTICAL RESEARCH; BEAMS; DEBONDING FAILURE; DESIGN PROCEDURE; DOMINANT MECHANISM; EXPERIMENTAL DATA; EXPERIMENTAL PROGRAM; FRP; IN-FIBER; INDEPENDENT RESEARCH; MONOTONIC LOADING; REINFORCED CONCRETE BEAMS; STRENGTHENED BEAMS; STRENGTHENING;

BUILDING MATERIALS; CONCRETE BEAMS AND GIRDERS; DEBONDING; ENERGY DISSIPATION; FAILURE ANALYSIS; FIBER REINFORCED PLASTICS; FRACTURE MECHANICS; REINFORCED CONCRETE; REINFORCED PLASTICS; STRENGTH OF MATERIALS; STRENGTHENING (METAL);

FRACTURE;

EID: 67649170409     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2009.04.011     Document Type: Article

References (51)

1. Kaiser HP. Strengthening of reinforced concrete with epoxy-bonded carbon fibre plastics (in German), Doctoral thesis, Diss. ETH Nr. 8918, ETH Zurich, Switzerland; 1989.
2. Meier U. Strengthening of structures using carbon fibre/epoxy composites. Construct Build Mater 9 6 (1995) 341-351
3. Buyukozturk O., and Hearing B. Failure behavior of precracked concrete beams retrofitted with FRP. J Compos Construct 2 3 (1998) 138-144
4. ACI 440. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, ACI 440.2R-02, American Concrete Institute; 2002.
5. ACI 440. Report on fiber-reinforced polymer (FRP) reinforcement for concrete structures, ACI 440.R-07. American Concrete Institute; 2007.
6. Oehlers D.J. FRP plates adhesively bonded to reinforced concrete beams: generic debonding mechanisms. Adv Struct Eng 9 6 (2006) 737-750
7. Buyukozturk O., Gunes O., and Karaca E. Progress review on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites. Construct Build Mater 18 (2004) 9-19
8. Teng J.G., Chen J.F., Smith S.T., and Lam L. FRP strengthened RC structures (2002), John Wiley and Sons
9. Au C., and Buyukozturk O. Peel and shear fracture characterization of debonding in FRP plated concrete affected by moisture. ASCE J Compos Construct 10 1 (2006) 35-47
10. Au C., and Buyukozturk O. Debonding of FRP plated concrete: a tri-layer fracture treatment. Int J Eng Fract Mech 73 (2006) 348-365
11. Qiao P., and Chen Y. Cohesive fracture simulation and failure modes of FRP-concrete bonded interfaces. Theor Appl Fract Mech 49 (2008) 213-225
12. Lu X.Z., Teng J.G., Ye L.P., and Jiang J.J. Bond-slip models for FRP sheets/plates bonded to concrete. Eng Struct 27 (2005) 920-937
13. Rabinovich O., and Frostig Y. Fracture mechanics approach to geometrically nonlinear debonding problems in RC beams strengthened with composite materials. Adv Struct Eng 9 6 (2006) 765-777
14. Teng J.G., Yuan H., and Chen J.F. FRP-to-concrete interfaces between two adjacent cracks: theoretical model for debonding failure. Int J Solids Struct 43 (2006) 5750-5778
15. Wang J. Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam. Int J Solids Struct 43 (2006) 6630-6648
16. Freddi F., and Savoia M. Analysis of FRP-concrete debonding via boundary integral equations. Eng Fract Mech 75 (2008) 1666-1683
17. Mazzotti C., Savoia M., and Ferracuti B. An experimental study on delamination of FRP plates bonded to concrete. Construct Build Mater 22 (2008) 1409-1421
18. Wan B., Sutton M.A., Petrou M.F., and Harries K.A. Li, Ning, investigation of bond between fiber reinforced polymer and concrete undergoing global mixed Mode I/II loading. J Eng Mech 130 12 (2004) 1467-1475
19. Pan J., and Leung C.K.Y. Debonding along the FRP-concrete interface under combined pulling/peeling effects. Eng Fract Mech 74 (2007) 132-150
20. Wang J. Cohesive zone model of FRP-concrete interface debonding under mixed-mode loading. Int J Solids Struct 44 (2007) 6551-6568
21. Bruno D., Carpino R., and Greco F. Modelling of mixed mode debonding in externally FRP reinforced beams. Compos Sci Technol 67 (2007) 1459-1474
22. Gunes O. A fracture based approach to understanding debonding in FRP bonded structural members. PhD thesis, Massachusetts Institute of Technology, Cambridge (MA); 2004.
23. Achintha P.M.M., and Burgoyne C.J. Fracture mechanics of plate debonding. ASCE J Compos Construct 12 4 (2008) 396-404
24. Aram M.R., Czaderski C., and Motavalli M. Debonding failure modes of flexural FRP-strengthened RC Beams. Compos B: Eng 39 (2007) 826-841
25. Hutchinson J.W., and Suo Z. Mixed-mode cracking in layered materials. Adv Appl Mech 29 (1992) 63-191
26. Evans A.G., Rühle M., Dalgleish B.J., and Charalambides P.G. The fracture energy of bimaterial interfaces. Mater Sci Eng A126 (1990) 53-64
27. Hutchinson J.W., Mear M.E., and Rice J.R. Crack paralleling an interface between dissimilar materials. Trans ASME 54 (1987) 828-832
28. Suo Z., and Hutchinson J.W. Steady-state cracking in brittle substrates beneath adherent films. Int J Solids Struct 25 11 (1989) 1337-1353
29. Hearing B. Delamination in reinforced concrete retrofitted with fiber reinforced plastics. PhD thesis, Massachusetts Institute of Technology, Cambridge (MA); 2000.
30. Bazant Z.P., and Pfeiffer P.A. Shear fracture test of concrete. Mater Struct, RILEM 110 (1986) 111-121
31. Erdogan F. Fracture mechanics of interfaces. In: Rossmanith (Ed). Damage and failure of interfaces (1997), Balkema, Rotterdam
32. Rice J.R. Elastic fracture mechanics concepts for interfacial cracks. Trans ASME 55 (1988) 98-103
33. Wu Z., Yuan H., and Niu H. Stress transfer and fracture propagation in different kinds of adhesive joints. J Eng Mech 128 5 (2002) 562-573
34. Wu Z., and Yin J. Fracturing behaviors of FRP-strengthened concrete structures. Eng Fract Mech 70 (2003) 1339-1355
35. Neubauer U, Rostasy FS. Bond failure of concrete fiber reinforced polymer plates at inclined cracks - experiments and fracture mechanics model, In: Dolan DW, Rizkalla SH, Nanni A, editors. Proceedings of the fourth international symposium: non-metallic (FRP) reinforcement for concrete structures, ACI SP-188, Baltimore, USA; 1999. p. 369-82.
36. Neubauer U, Rostasy FS. Design aspects of concrete structures strengthened with externally bonded FRP-plates. In: Proceedings of the 7th international conference on structural faults and repair, vol. 2, Edinburgh UK; 1997. p. 109-18.
37. Holzenkämpfer, P., Ingenieurmodelle des Verbunds geklebter Vewehrung für Betonbau-teile. PhD thesis, TU Braunschweig, Germany; 1993.
38. Chen J.F., and Teng J.G. Anchorage strength models for frp and steel plates bonded to concrete. ASCE J Struct Eng 127 7 (2001) 784-791
39. DIN 1048-2. Testing concrete; hardened concrete in buildings and components. Deutsches Institut Fur Normung E.V., Germany; 1991 [in German].
40. CEB-FIP model code. Comite Euro-International du Beton, Lausanne, Switzerland; 1990.
41. Leung C.K.Y. Delamination failure in concrete beams retrofitted with a bonded plate. J Mater Civil Eng 13 2 (2001) 106-113
42. Bazant Z.P., Kim P., and Pfeiffer P.A. Determination of fracture properties from size effect tests. ASCE J Struct Eng 112 2 (1986) 289-307
43. Reinhardt H.W., and Xu S.L. A practical testing approach to determine Mode II fracture energy G(IIF) for concrete. Int J Fract 105 2 (2000) 107-125
44. Taljsten B. Strengthening of concrete prisms using the plate-bonding technique. Int J Fract 82 (1996) 253-266
45. Ye L., Friedrich K., Weimer C., and Mai Y.W. Surface treatments of adhesion bonding between concrete and CFRP composite. Adv Compos Mater 7 1 (1998) 47-61
46. De Lorenzis L., Miller B., and Nanni A. Bond of fiber-reinforced polymer laminates to concrete. ACI Mater J 98 3 (2001) 256-264
47. Karbhari V.M., and Engineer M. Investigation of bond between concrete and composites. J Reinforced Plast Compos 15 2 (1996) 208-227
48. Horiguchi T, Saeki N. Effect of test methods and quality of concrete on bond strength of CFRP Sheet. Non-metallic (FRP) reinforcement for concrete structures. In: Proceedings of the third international symposium, vol. 1; October 1997. p. 265-70.
49. Park R., and Paulay T. Reinforced concrete structures (1975), John Wiley & Sons
50. Taljsten B. Concrete beams strengthened for bending using CFRP-sheets. In: Forde MC, editor. Structural Faults + Repair-99, London, UK; 1999.
51. Leung CKY. Unpublished experimental data through personal communication. Hong Kong University of Science and Technology: Kowloon, Hong Kong; 2004.