Characterization of elastic and time-dependent deformations in high performance lightweight concrete by image analysis

Cement and Concrete Research

Volumn 39, Issue 7, 2009, Pages 610-619

  Lopez, Mauricio ^a   Kahn, Lawrence F ^b   Kurtis, Kimberly E ^b  

^a PONTIFICIA UNIVERSIDAD CATÓLICA DE CHILE   (Chile)

^b Georgia Institute of Technology   (United States)

Author keywords

Aggregate; Cement paste; Creep; Interfacial transition zone; Shrinkage

Indexed keywords

AVERAGE STRAIN; CEMENT PASTE; ELASTIC PROPERTIES; HIGH-PERFORMANCE CONCRETE; INTERFACIAL TRANSITION ZONE; LIGHT WEIGHT AGGREGATE; MICROSTRUCTURAL FEATURES; NON-UNIFORM DEFORMATION; NONUNIFORMITY; SHRINKAGE STRAINS; SPATIAL DIFFERENCES; STRAIN MAPPING; STRAIN MAPS; TIME-DEPENDENT DEFORMATION;

AGGLOMERATION; AGGREGATES; CEMENTS; CONCRETES; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; IMAGE ANALYSIS; MICROSTRUCTURAL EVOLUTION; OIL WELL CEMENTING; SHRINKAGE; STRAIN; STRESS CONCENTRATION;

CREEP;

EID: 67349269493     PISSN: 00088846     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconres.2009.03.015     Document Type: Article

References (39)

1. Bremner T.W. Influences of Aggregate Structure on Low Density Concrete (1981), University of London 229
2. Lopez M., Kahn L.F., and Kurtis K.E. Internal curing in high performance concretes - a new paradigm (in Spanish). Revista Ingenieria de Construccion 20 2 (2005) 117-126
3. Bentz D.P., and Snyder K.A. Protected paste volume in concrete - extension to internal curing using saturated lightweight fine aggregate. Cement and Concrete Research 29 11 (1999) 1863-1867
4. Lura P., Jensen O.M., and Igarashi S.I. Experimental observation of internal water curing of concrete. Materials and Structures 40 2 (2007) 211-220
5. In: Kovler K., and Jensen O.M. (Eds). Internal Curing of Concrete: State-of-Art Report of RILEM Technical Committee 196-ICC: Report 41 (2007), RILEM Publications S.A.R.L., Bagneux 141
6. Bremner T.W., and Holm T.A. Elastic compatibility and the behavior of concrete. Journal of the American Concrete Institute 83 2 (1986) 244-250
7. Weber S., and Reinhardt H.W. A new generation of high performance concrete: concrete with autogenous curing. Advanced Cement Based Materials 6 2 (1997) 59-68
8. Kohno K., Okamoto T., Isikawa Y., Sibata T., and Mori H. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete. Cement and Concrete Research 29 4 (1999) 611-614
9. Lopez M., Kahn L.F., and Kurtis K.E. Effect of internally stored water on creep of high-performance concrete. ACI Materials Journal 105 3 (2008) 265-273
10. Thomas M.D.A. Chloride diffusion in high-performance lightweight aggregate concrete. 7th CANMET/ACI International Conference on Durability of Concrete, SP-234 (2006), CANMET-ACI, Montreal
11. Zhang M.H., and Gjorv O.E. Microstructure of the interfacial zone between lightweight aggregate and cement paste. Cement and Concrete Research 20 4 (1990) 610-618
12. Zhang M.H., and Gjorv O.E. Penetration of cement paste into lightweight aggregate. Cement and Concrete Research 22 1 (1992) 47-55
13. Neville A.M. Creep of concrete as function of its cement paste content. Magazine of Concrete Research 16 46 (1964) 21-30
14. Pickett G. Effect of aggregate on shrinkage of concrete and hypothesis concerning shrinkage. Journal of the American Concrete Institute 27 5 (1956) 581-590
15. Bentur A., Igarashi S., and Kovler K. Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates. Cement and Concrete Research 31 11 (2001) 1587-1591
16. Kahn L.F., and Lopez M. Prestress losses in high performance lightweight concrete pretensioned bridge girder. PCI Journal 50 5 (2005) 84-94
17. Lopez M., Kahn L.F., and Kurtis K.E. Creep and shrinkage of high-performance lightweight concrete. ACI Materials Journal 101 5 (2004) 391-399
18. Lopez M., Kurtis K.E., and Kahn L.F. Pre-wetted lightweight coarse aggregate reduces long-term deformations of high performance lightweight concrete. 7th CANMET/ACI International Conference on Durability of Concrete, SP-234 (2006), CANMET - ACI, Montreal
19. Nilsen A.U., and Aïtcin P.C. Properties of high-strength concrete containing light-, normal- and heavy-weight aggregate. Cement Concrete and Aggregates 14 1 (1992) 8-12
20. ACI Committee 213. Guide for structural lightweight-aggregate concrete. ACI Manual of Concrete Practice (2003), American Concrete Institute, Farmington Hills, MI 38
21. Lopez M. Creep and shrinkage of high performance lightweight concrete a multi-scale investigation. School of Civil and Environmental Engineering (2005), Georgia Institute of Technology, Atlanta, GA 531
22. Lopez M., Kahn L.F., and Kurtis K.E. Characterization elastic and time-dependent deformations in normal strength and high performance concrete by image analysis. Cement and Concrete Research 37 8 (2007) 1265-1277
23. ASTM C 109. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in or [50-mm] Cube Specimens) (2002), American Society for Testing and Materials, West Conshohocken, PA
24. Videla C., and Lopez M. Influence of lightweight aggregate intrinsic strength on compressive strength and modulus of elasticity of lightweight concrete. Revista Ingenieria de Construccion 15 1 (2000) 43-57
25. Videla C., and Lopez M. Mixture proportioning methodology for structural sand-lightweight concrete. ACI Materials Journal 97 3 (2000) 281-289
26. ASTM C 512. Standard Test Method for Creep of Concrete in Compression (2002), American Society for Testing and Materials, West Conshohocken, PA
27. Matrox-Imaging, Matrox Inspector 4.1. 2002.
28. Choi S., and Shah S.P. Measurement of deformations on concrete subjected to compression using image correlation. Experimental Mechanics 37 3 (1997) 307-313
29. Neubauer C.M., and Jennings H.M. The use of digital images to determine deformation throughout a microstructure - part II - application to cement paste. Journal of Materials Science 35 22 (2000) 5751-5765
30. Neubauer C.M., Jennings H.M., and Garboczi E.J. Mapping drying shrinkage deformations in cement-based materials. Cement and Concrete Research 27 10 (1997) 1603-1612
31. Thomas F.G. Creep of Concrete under Load (1937), International Association of Testing Materials, London
32. Neville A.M., Dilger W.H., and Brooks J.J. Creep of Plain and Structural Concrete (1983), Construction Press
33. Alexander M.G. Aggregate and the deformation properties of concrete. ACI Materials Journal 93 6 (1996) 569-577
34. Moon J.-H., Rajabipour F., Pease B., and Weiss J. Autogenous shrinkage, residual stresses, and cracking in cementitious composites: the influence of internal and external restraint. Self-Desiccation and Its Importance in Concrete Technology (2005), Lund University Lund Institute of Technology, Gaithersburg, Maryland, USA
35. Pfeifer D.W. Sand replacement in structural lightweight concrete - creep and shrinkage studies. American Concrete Institute - Journal 65 2 (1968) 131-140
36. Rogers G.L. On the Creep and Shrinkage Characteristics of Solite Concretes. Proceedings of World Conference on Prestressed Concrete, University of California in Cooperation with the Prestressed Concrete Institute (1957) San Francisco, CA, pp. 2.1--2.5
37. Neville A.M. Theories of creep in concrete. ACI Journal 52 (1955) 47-60
38. Neville A.M. Role of cement in creep of mortar. Journal of the American Concrete Institute 30 9 (1959) 963-984
39. Neville, A.M. and W.H. Dilger, Creep of concrete: plain, reinforced, and prestressed. 1970, Amsterdam, New York,: North-Holland Pub. Co. American Elsevier. xix, 622.