Effect of internally stored water on creep of high-performance concrete

ACI Materials Journal

Volumn 105, Issue 3, 2008, Pages 265-273

  Lopez, Mauricio ^a,b   Kahn, Lawrence F ^a,c,d,e   Kurtis, Kimberly E ^a,f  

^a ACI ^*

^b PONTIFICIA UNIVERSIDAD CATÓLICA DE CHILE   (Chile)

^c Georgia Institute of Technology   (United States)

^d E803 Faculty Network Coordinating Committee

^e Structural Concrete Building Code

^f GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Autogenous shrinkage; Basic creep; Hydration; Internal curing; Lightweight aggregate

Indexed keywords

AMERICAN CONCRETE INSTITUTE (ACI); CONCRETE SPECIMENS; HIGH PERFORMANCE CONCRETE (HPC); INITIAL MOISTURE; INTERNAL CURING; LIGHTWEIGHT AGGREGATE (LWA); LONG-TERM DEFORMATIONS; STRENGTH (IGC: D5/D6); WATER SEEPAGE;

AGGREGATES; COMPRESSIVE STRENGTH; CONCRETES; CREEP; CURING; DRYING; ICE; MULTITASKING; PHOTOACOUSTIC EFFECT; SEEPAGE; SHRINKAGE;

STRENGTH OF MATERIALS;

EID: 44849083426     PISSN: 0889325X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (65)

1. Lopez, M.; Kahn, L. F.; and Kurtis, K. E., "Internal Curing in High Performance Concretes - A New Paradigm," Revista Ingenieria de Construccion, V. 20, No. 2, 2005, pp. 117-126. (in Spanish)
2. Malhotra, V. M., and Mehta, P. K., "High-Performance, High-Volume Fly Ash Concrete: Materials, Mixture Proportions, Properties, Construction Practice, and Case Historiesm," second edition, Supplementary Cementing Materials for Sustainable Development Inc., Ottawa, ON, Canada, 2005, 124 pp.
3. Ayers, M. E., and Khan, M. S., "Overview of Fly Ash and Silica Fume Concretes: The Need for Rational Curing Standards," Concrete Technology: Past, Present, and Future, Proceedings of V. Mohan Malhotra Symposium, SP-144, P. Kumar Mehta, ed., American Concrete Institute, 1993, pp. 605-617.
4. Jensen, O. M., and Hansen, P. F., "Water-Entrained Cement-Based Materials I - Principles and Theoretical Background," Cement and Concrete Research, V. 31, No. 4, 2001, pp. 647-654.
5. Powers, T. C., "A Discussion of Cement Hydration in Relation to the Curing of Concrete," Bulletin 25, Portland Cement Association, Skokie, IL, 1947, pp. 178-188.
6. Mindess, S.; Young, J. F.; and Darwin, D., Concrete, second edition, Prentice Hall, 2003, 644 pp.
7. Mehta, P. K., and Monteiro, P. J. M., Concrete: Microstructure, Properties, and Materials, second edition, McGraw-Hill, 1993, 659 pp.
8. Aïtcin, P.-C., High-Performance Concrete, E&FN Spon, London, UK, 1998, 591 pp.
9. Carrasquillo, R. L.; Nilson, A. H.; and Slate, F. O., "Properties of High-Strength Concrete Subject to Short-Term Loads," ACI JOURNAL, Proceedings V. 78, No. 3, May-June 1981, pp. 171-178.
10. Carrasquillo, P. M., and Carrasquillo, R. L., "Evaluation of the Use of Current Concrete Practice in the Production of High-Strength Concrete," ACI Materials Journal, V. 85, No. 1, Jan.-Feb. 1988, pp. 49-54.
11. ACI Committee 363, "Guide to Quality Control and Testing of High-Strength Concrete (363.2R-98)" American Concrete Institute, Farmington Hills, MI, 1998, 18 pp.
12. Jensen, O. M., and Hansen, P. F., "Water-Entrained Cement-Based Materials II-Experimental Observations," Cement and Concrete Research, V. 32, No. 6, 2002, pp. 973-978.
13. Zhutovsky, S.; Kovler, K.; and Bentur, A., "Efficiency of Lightweight Aggregates for Internal Curing of High Strength Concrete to Eliminate Autogenous Shrinkage," Materials and Structures, V. 35, No. 246, 2002, pp. 97-101.
14. Jensen, O. M., and Lura, P., "Techniques and Materials for Internal Water Curing of Concrete," Materials and Structures, V. 39, No. 9, 2006, pp. 817-825.
15. Holm, T. A.; Ooi, O. S.; and Bremner, T. W., "Moisture Dynamics in Lightweight Aggregate and Concrete," Theodore Bremner Symposium on High-Performance Lightweight Concrete, Thessaloniki, Greece, 2003, pp. 167-184.
16. Weber, S., and Reinhardt, H. W., "A New Generation of High Performance Concrete: Concrete with Autogenous Curing," Advanced Cement Based Materials, V. 6, No. 2, 1997, pp. 59-68.
17. Geiker, M. R.; Bentz, D. P.; and Jensen, O. M., "Mitigating Autogenous Shrinkage by Internal Curing," High Performance Structural Lightweight Concrete, SP-218, J. Ries and T. Holm, eds., American Concrete Institute, Farmington Hills, MI, 2002, pp. 143-154.
18. Thomas, M. D. A., "Chloride Diffusion in High-Performance Light-weight Aggregate Concrete," 7th CANMET/ACI International Conference on Durability of Concrete, SP-234, V. M. Malhotra, ed., American Concrete Institute, Farmington Hills, MI, 2006, pp. 797-812.
19. Bentz, D. P., and Snyder, K. A., "Protected Paste Volume in Concrete-Extension to Internal Curing using Saturated Lightweight Fine Aggregate," Cement and Concrete Research, V. 29, No. 11, 1999, pp. 1863-1867.
20. Bentur, A.; Igarashi, S.; and Kovler, K., "Prevention of Autogenous Shrinkage in High-Strength Concrete by Internal Curing using Wet Lightweight Aggregates," Cement and Concrete Research, V. 31, No. 11, 2001, pp. 1587-1591.
21. Kohno, K.; Okamoto, T.; Isikawa, Y.; Sibata, T.; and Mori, H., "Effects of Artificial Lightweight Aggregate on Autogenous Shrinkage of Concrete," Cement and Concrete Research, V. 29, No. 4, 1999, pp. 611-614.
22. Cusson, D., and Hoogeveen, T. "Internally-Cured High-Performance Concrete Under Restrained Shrinkage and Creep," CONCREEP7 Workshop on Creep, Shrinkage and Durability of Concrete and Concrete Structures, Hermes Science Publishing, 2005, pp. 579-584.
23. Holm, T. A., and Bremner, T. W., "State-of-the-Art Report on High-Strength, High-Durability Structural Low-Density Concrete for Applications in Severe Marine Environments," Innovations for Navigation Projects Research Program, ERDC/SL TR-00-3, U.S. Army Corps of Engineers, Engineer Research and Development Center, Structures Laboratory, Vicksburg, MS, 2000, 116 pp.
24. Lopez, M.; Kahn, L. F.; and Kurtis, K. E., "Creep and Shrinkage of High-Performance Lightweight Concrete," ACI Materials Journal, V. 101, No. 5, Sept.-Oct. 2004, pp. 391-399.
25. Lopez, M.; Kahn, L. F.; Kurtis, K. E.; and Buchberg, B. S., "LongTerm Creep and Shrinkage in High-Strength Lightweight Concrete," Shrinkage and Creep of Concrete, SP-227, N. J. Gardener and J. Weiss, eds., American Concrete Institute, Farmington Hills, MI, 2005, pp. 317-336.
26. ASTM C684, "Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens," ASTM International, West Conshohocken, PA, 1999, 10 pp.
27. ASTM C39, "Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens," ASTM International, West Conshohocken, PA, 2004, 7 pp.
28. ASTM C469, "Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression," ASTM International, West Conshohocken, PA, 2002, 5 pp.
29. ASTM C512, "Standard Test Method for Creep of Concrete in Compression," ASTM International, West Conshohocken, PA, 2002, 4 pp.
30. ACI Committee 213, "Guide for Structural Lightweight-Aggregate Concrete (213R-03)," American Concrete Institute, Farmington Hills, MI, 2003, 38 pp.
31. Videla, C., and Lopez, M., "Mixture Proportioning Methodology for Structural Sand-Lightweight Concrete," ACI Materials Journal, V. 97, No. 3, May-June 2000, pp. 281-289.
32. Videla, C., and Lopez, M., "Influence of Lightweight Aggregate Intrinsic Strength on Compressive Strength and Modulus of Elasticity of Lightweight Concrete," Revista Ingenieria de Construccion, V. 15, No. 1, 2000, pp. 43-57.
33. Videla, C., and Lopez, M., "Effect of Lightweight Aggregate Intrinsic Strength on Lightweight Concrete Compressive Strength and Modulus of Elasticity," Materiales de Construccion, V. 52, No. 265, 2002, pp. 23-37.
34. ACI Committee 363, "Report on High-Strength Concrete (363R-92) (reapproved 1997)" American Concrete Institute, Farmington Hills, MI, 1992, 55 pp.
35. Lura, P.; van Breugel, K.; and Maruyama, I., "Autogenous and Drying Shrinkage of High Strength Lightweight Aggregate Concrete at Early Ages-The Effect of Specimen Size," RILEM International Conference on Early Age Cracking in Cementitious Systems, Haifa, Israel, 2001, pp. 337-344.
36. Pickett, G., "Effect of Aggregate on Shrinkage of Concrete and Hypothesis Concerning Shrinkage," ACI JOURNAL, Proceedings V. 27, No. 5, May 1956, pp. 581-590.
37. Berra, M., and Ferrada, G., "Normalweight and Total-Lightweight High-Strength Concretes: A Comparative Experimental Study," HighStrength Concrete: Second International Symposium, SP-121, W. T. Hester, ed., American Concrete Institute, Farmington Hills, MI, 1990, pp. 701-733.
38. Holm, T. A., and Bremner, T. W., "High Strength Lightweight Aggregate Concrete," High Performance Concrete: Properties and Applications, S. P. Shah and S. H. Ahmad, eds., McGraw-Hill, New York, NY, 1994, 388 pp.
39. Zhang, M. H.; Li, L.; and Paramasivum, P., "Shrinkage of HighStrength Lightweight Aggregate Concrete Exposed to Dry Environment," ACI Materials Journal, V. 102, No. 2, Mar.-Apr. 2005, pp. 86-92.
40. Nilsen, A. U., and Aïtcin, P. C., "Properties of High-Strength Concrete Containing Light-, Normal- and Heavy-Weight Aggregate," Cement Concrete and Aggregates, V. 14, No. 1, 1992, pp. 8-12.
41. Curcio, F.; Galeota, D.; Gallo, A.; and Giammatteo, M. M., "High-Performance Lightweight Concrete for the Precast Prestressed Concrete Industry," Fourth CANMET/ACI/JCI International Symposium on Advances in Concrete Technology, SP-179, V. M. Malhotra, ed., American Concrete Institute, 1998, pp. 389-404.
42. AASHTO-LRFD, "AASHTO LRFD Bridge Design Specifications," American Association of State Highway and Transportation Officials, Washington, DC, 1998, 1265 pp.
43. ACI Committee 209, "Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures (ACI 209R-92) (reapproved 1997)," American Concrete Institute, Farmington Hills, MI, 1992, 47 pp.
44. Bažant, Z. P., and Baweja, S., "Creep and Shrinkage Prediction Model for Analysis and Design of Concrete Structures: Model B3-RILEM Draft Recommendation," Materials and Structures, V. 28, 1995, pp. 357-365.
45. Comite Euro-Internacional du Beton (CEB) and Federation Internationale de la Precontrainte (FIP), Evaluation of the Time Dependent Behavior of Concrete, The Construction Press, Lancaster, 1990, 575 pp.
46. Gardner, N. J., and Lockman, M. J., "Design Provisions for Drying Shrinkage and Creep of Normal-Strength Concrete," ACI Materials Journal, V. 98, No. 2, Mar.-Apr. 2001, pp. 159-167.
47. Sakata, K.; Tsubaki, T.; Inoue, S.; and Ayano, T., "Prediction Equations of Creep and Drying Shrinkage for Wide-Ranged Strength Concrete," Creep Shrinkage and Durability Mechanics of Concrete and Other Quasi-Brittle Materials, Elsevier, Cambridge, MA, 2001, pp. 753-758.
48. Lopez, M., "Creep and Shrinkage of High Performance Lightweight Concrete a Multi-Scale Investigation," PhD thesis, Georgia Institute of Technology, Atlanta, GA, 2005, 531 pp.
49. Dilger, W. H., and Wang, C., "Creep and Shrinkage of HighPerformance Concrete," The Adam Neville Symposium: Creep and Shrinkage-Structural Design Effects, SP-194, A. Al-Manaseer, ed., American Concrete Institute, 2000, pp. 361-379.
50. Neville, A. M., "Creep of Concrete as Function of its Cement Paste Content," Magazine of Concrete Research, V. 16, No. 46, 1964, pp. 21-30.
51. Leming, M. L., "Creep and Shrinkage of Lightweight Concrete," Department of Civil Engineering, North Carolina State University, Raleigh, NC, 1990, 4 pp.
52. de Larrand, F.; Acker, P.; and Le Roy, R., "Shrinkage, Creep and Thermal Properties," High Performance Concrete: Properties and Applications, S. P. Shah and S. H. Ahmad, eds., McGraw-Hill, New York, NY, 1994, pp. 65-114.
53. Lura, P.; Jensen, O. M.; and Igarashi, S. I., "Experimental Observation of Internal Water Curing of Concrete," Materials and Structures, V. 40, No. 2, 2007, pp. 211-220.
54. Jensen, O. M., and Hansen, P. F., "Autogenous Deformation and RHChange in Perspective," Cement and Concrete Research, V. 31, No. 12, 2001, pp. 1859-1865.
55. El-Dieb, A. S., "Self-Curing Concrete: Water Retention, Hydration and Moisture Transport," Construction and Building Materials, V. 21, No. 6, 2007, pp. 1282-1287.
56. Neville, A. M., and Dilger, W. H., Creep of Concrete: Plain, Reinforced, and Prestressed, North-Holland Pub. Co., American Elsevier, Amsterdam, New York, 1970, 622 pp.
57. Neville, A. M., "Theories of Creep in Concrete," ACI JOURNAL, Proceedings V. 52, No. 9, Sept. 1955, pp. 47-60.
58. Ali, I., and Kesler, C. E., "Mechanisms of Creep in Concrete," Symposium on Creep of Concrete, SP-9, A. M. Neville, ed., American Concrete Institute, Farmington Hills, MI, 1964, pp. 35-63.
59. Neville, A. M., Properties of Concrete, fourth edition, J. Wiley, 1996, 844 pp.
60. Neville, A. M.; Dilger, W. H.; and Brooks, J. J., Creep of Plain and Structural Concrete, Construction Press, 1983, 361 pp.
61. Bažant, Z. P., "Prediction of Concrete Creep and Shrinkage: Past, Present and Future," Nuclear Engineering and Design, V. 203, No. 1, 2001, pp. 27-38.
62. ACI Committee 209, "Effect of Concrete Constituent, Environment, and Stress on the Creep and Shrinkage of Concrete," Designing for Effects of Creep, Shrinkage, Temperature in Concrete Structures, SP-27, American Concrete Institute, Farmington Hills, MI, 1971, pp. 1-42.
63. Lyman, C. G., Growth and Movement in Portland Cement Concrete, Oxford University Press, London, UK, 1934, 139 pp.
64. Thomas, F. G., "Creep of Concrete under Load," International Association of Testing Materials, London, UK, 1937, pp. 292-294.
65. Davis, R. E.; Davis, H. E.; and Hamilton, J. S., "Plastic Bow of Concrete under Sustained Stress," ASTM Proceedings, V. 34, No. 11, 1934, pp. 354-386.