Failure mechanism for thermal fatigue of thermal barrier coating systems

Journal of Thermal Spray Technology

Volumn 18, Issue 2, 2009, Pages 223-230

  Giolli, C ^a,b   Scrivani, A ^b   Rizzi, G ^b   Borgioli, F ^a,c   Bolelli, Giovanni ^d   Lusvarghi, L ^d  

^a UNIVERSITY OF FLORENCE   (Italy)

^b Turbocoating SpA   (Italy)

^c Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali ^*  (Italy)

^d UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

Author keywords

Indentation fracture toughness; Instrumented indentation testing; Raman spectroscopy; Residual stresses; Thermal barrier coatings; Thermal fatigue test

Indexed keywords

AIR PLASMA SPRAYS; BEFORE AND AFTER; BOND COATS; CONICRALY; CYCLING TESTS; FAILURE MECHANISMS; IN-PLANE STRESS; INDENTATION FRACTURE TOUGHNESS; INSTRUMENTED INDENTATION TESTING; MICRO MECHANICAL PROPERTIES; ORIGINAL EQUIPMENT MANUFACTURERS; PARTIALLY STABILIZED ZIRCONIAS; POROSITY LEVELS; THERMAL BARRIER COATING SYSTEMS; THERMAL FATIGUE RESISTANCES; THERMAL FATIGUE TEST; TOP-COATS;

FATIGUE TESTING; FRACTURE; FRACTURE TESTING; FRACTURE TOUGHNESS; PHASE SHIFTERS; PLASMA SPRAYING; POROSITY; RAMAN SCATTERING; RAMAN SPECTROSCOPY; RESIDUAL STRESSES; SPECTRUM ANALYSIS; SPRAYED COATINGS; STRENGTH OF MATERIALS; THERMAL FATIGUE; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

THERMAL BARRIER COATINGS;

EID: 67349252027     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-009-9307-4     Document Type: Conference Paper

References (45)

1. W. Brandl, D. Toma, J. Krüger, H.J. Grabke, G. Matthäus, The oxidation behaviour of HVOF thermal-sprayed MCrAlY coatings, Surf. Coat. Technol. 94-95, 21-26 (1997)
2. D. Toma, W. Brandl, and U. Koster, (1999) Studies on the transient stage of oxidation of VPS and HVOF sprayed MCrAlY coatings. Surf. Coat. Technol. 120:8-15.
3. E. Lugscheider, C. Herbst, L. Zhao, Parameter studies on high-velocity oxy-fuel spraying of MCrAlY coatings. Surf. Coat. Technol. 108-109(1-3), p 16-23 (1998)
4. R. Stolle, Conventional and Advanced Coatings for Turbine Airfoils, MTU Aero Engines, D-80995 München. http://www.mtu.de/en/technologies/ engineering_news/conventional_and_advanced_coatings.pdf. Accessed May 7
5. J.R. Davis, Handbook of Thermal Spray Technology. (ASM International, Materials Park, OH, USA, 2005), pp. 177-178
6. K.E. Schneider, V. Belashchenko, M. Dratwinsky, S. Siegamnn, A. Zagorski, Thermal spraying for power generation components (Wiley-VCH Verlag GmbH, 2006)
7. E.Y. Lee and R.D. Sisson, The Effect of Bond Coat Oxidation on the Failure of Thermal Barrier Coatings, Thermal Spray Industrial Application, C.C. Berndt and S. Sampath, Eds., June 20-24, 1994 (Boston, MA), ASM International, 1994, p 55-59
8. Y. Yaslier and S. Alperine, EB-PVD Thermal Barrier Coatings: Comparative Evaluation and Competing Deposition Technologies, AGARD Report 823, Thermal Barrier Coatings, 1998, p 8-10
9. J.A. Haynes, M.K. Ferber, W.D. Porter, Thermal cycling behavior of plasma - sprayed thermal barrier coatings with various MCrAlX bond coats. J. Therm. Spray Technol. 9(1), 38-43 (2000)
10. Y. He, K.N. Lee, S. Tewari, R.A. Miller, Development of refractory silicate - yttria - stabilized zirconia dual - layer thermal barrier coatings. J. Therm. Spray Technol. 9(1), 59-64 (2000)
11. S. Kuroda, T.W. Clyne, The quenching stress in thermally sprayed coatings. Thin Solid Films. 200(1), 49-66 (1991)
12. G.C. Wood, F.H. Stott, Oxidation of alloys. Mater. Sci. Technol. 3, 519-530 (1987)
13. R. Mevlel, Cyclic oxidation of high-temperature alloys. Mater. Sci. Technol. 3, 531-535 (1987)
14. A.G. Evans, D. R. Mumm, J.W. Hutchinson, G.H. Meier, F.S. Pettit, Mechanisms controlling the durability of thermal barrier coatings. Prog. Mater. Sci. 46(5), 505-553 (2001)
15. J. Allen Haynes, E. Douglas Rigney, M.K. Ferber, W.D. Porter, Thermal cycling behavior of plasma-sprayed thermal barrier coatings with various MCrAIY bond coats. J. Therm. Spray Technol. 9(1), 38-48 (2000)
16. P. Scardi, M. Leoni, L. Bertamini, Influence of phase stability on the residual stress in partially stabilized zirconia TBC produced by plasma spray. Surf. Coat. Technol. 76-77, 106-112 (1995)
17. W.J. Lackey, D.P. Stinton, G.A. Cerny, A.C. Schaffhauser, L.L. Fehrenbacher, Ceramic coatings for advanced heat engines, a review and projection. Adv. Ceram. Mater. 2, 24-30 (1987)
18. J.W. Hutchinson, Z. Suo, Mixed mode cracking in layered materials. Adv. Appl. Mech. 29, 63-69 (1992)
19. E. Tzimas, H. Müllejans, S.D. Peteves, J. Bressers, W. Stamm, Failure of thermal barrier coating systems under cyclic thermomechanical loading. Acta Mater. 48(18-19), 4699-4707 (2000)
20. G. Qian, T. Nakamura, C.C. Berndt, S.H. Leigh, Tensile toughness test and high temperature fracture analysis of thermal barrier coatings. Acta Mater. 45(4), 1767-1784 (1997)
21. J.T. De Masi Marcin, K.D. Sheffler, S. Bose, Mechanisms of degradation and failure in a plasma - deposited thermal barrier coating. ASME Journal of Engineering for Gas Turbine and Power 112, 521-528 (1990)
22. A. Rabiei, A.G. Evans, Failure mechanisms associated with the thermally grown oxide in plasma - sprayed thermal barrier coatings. Acta Mater. 48(15), 3963-3976 (2000)
23. R. Morrell, Handbook of Properties of Technical and Engineering Ceramics Part 1 (Her Majesty's Stationery Office, London UK, 1989)
24. L. Lutterotti, S. Matthies, and H.-R. Wenk, MAUD (Material Analysis Using Diffraction): A User Friendly Java Program for Rietveld Texture Analysis and More, Proceedings of the 12th International Conference on Textures of Materials (ICOTOM-12), Vol 1, J.A. Szpunar, Ed. (Ottawa), NRC, 1999, p 1599-1604
25. B.D. Cullity, Elements of X-ray Diffraction (Addison-Wesley Publishing, 1978)
26. J. Thornton, D. Cookson, E. Pescott, The measurement of strains within the bulk of aged and as-sprayed thermal barrier coatings using synchrotron radiation. Surf. Coat. Technol. 120-121, 96-102 (1999)
27. A.F. Evans, T.R. Wilshaw, Quasi-static solid particle damage in brittle solids - I. Observations analysis and implications. Acta Metallurgica, 24, 939-956 (1976)
28. Y. Liu, T.E. Fischer, A. Dent, Comparison of HVOF and plasma - sprayed alumina - titania coatings - microstructure, mechanical properties and abrasion behaviour. Surf. Coat. Technol. 167(1), 68-76 (2003)
29. E. López Cantera, and B.G. Mellor, Fracture toughness and crack morphologies in eroded WC-Co-Cr thermally sprayed coatings. Mater. Lett. 37(4-5), 201-210 (1998)
30. 2 coatings: Their microstructure, mechanical properties and tribology behavior. Surf. Coat. Technol. 201(3-4), 1436-1443 (2006)
31. A. Scrivani, G. Rizzi, U. Bardi, C. Giolli, M. Muniz Miranda, S. Ciattini, A. Fossati, F. Borgioli, Thermal fatigue behavior of thick and porous thermal barrier coatings systems, J Therm. Spray Technol. 16(5-6), 816-821 (2007)
32. F. Kroupa, Nonlinear behaviour in compression and tension of thermally sprayed ceramic coatings, J Therm. Spray Technol. 16(1), 84-95 (2007)
33. V. Teixeira, M. Andritschky, W. Fischer, H.P. Buchkremer, D. Stöver, Analysis of residual stresses in thermal barrier coatings, J. Mater. Process. Technol. 92-93, 209-216 (1999)
34. M. Ahrens, S. Lampenscherf, R. Vaßen, D. Stöver, Sintering and Creep Processes in Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Technol. 13(3), 432-442 (2004)
35. J.A. Thompson, T.W. Clyne, The effect of heat treatment on the stiffness of Zirconia top coats in plasma-sprayed TBCs, Acta Mater. 49, 1565-1575 (2001)
36. S.R. Choi, D. Zhu, R.A. Miller, Effect of Sintering on Mechanical Properties of Plasma-Sprayed Zirconia-Based Thermal Barrier Coatings, J. Am. Ceram. Soc. 88(10), 2859-2867 (2005)
37. S.A. Tsipas, I.O. Golosnoy, R. Damani, T.W. Clyne, The Effect of a High Thermal Gradient on Sintering and Stiffening in the Top Coat of a Thermal Barrier Coating System, J. Therm. Spray Technol. 13(3), 370-376 (2004)
38. F. Cernuschi, P.G. Bison, S. Marinetti, P. Scardi, Thermophysical, mechanical and microstructural characterization of aged free-standing plasma-sprayed zirconia coatings, Acta Mater. 56, 4477-4488 (2008)
39. S. Guo, Y. Kagawa, Young's moduli of zirconia top-coat and thermally grown oxide in a plasma-sprayed thermal barrier coating system, Scripta Mater. 50, 1401-1406 (2004)
40. B. Siebert, C. Funke, R. Vaßen, D. Stöver, Changes in porosity and Young's Modulus due to sintering of plasma sprayed thermal barrier coatings, J. Eur. Ceram. Soc. 25, 393-400 (2005)
41. R.S. Lima, B.R. Marple, High Weibull Modulus HVOF Titania Coatings, J. Therm. Spray Technol. 12(2), 240-249 (2003)
42. S.H. Leigh, C.K. Lin, C.C. Berndt, Elastic response of thermal spray deposits under indentation tests, J. Amer. Ceram. Soc. 80, 2093-2099 (1997)
43. M.M. Lima, C. Godoy, P.J. Modenesi, J.C. Avelar-Batista, A. Davison, A. Matthews, Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC-Co thermally sprayed coatings, Surf. Coat. Technol. 177-178, 489-496 (2004)
44. R. Venkataraman and R. Krishnamurthy, Evaluation of Fracture Toughness of as Plasma Sprayed Alumina-13 wt.% Titania Coatings by Micro-Indentation Techniques, J. Eur. Ceram. Soc. 26, 3075-3081 (2006)
45. K. Vaidyanathan, M. Gell, E. Jordan, Mechanisms of spallation of electron beam physical vapor deposited thermal barrier coatings with and without platinum aluminide bond coat ridges, Surf. Coat. Technol. 133-134, 28-34 (2000)