Effect of sintering on mechanical properties of plasma-sprayed zirconia-based thermal barrier coatings

Journal of the American Ceramic Society

Volumn 88, Issue 10, 2005, Pages 2859-2867

  Choi, Sung R ^a   Zhu, Dongming ^a   Miller, Robert A ^a  

^a NASA GLENN RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FLEXURE STRENGTH; MONOCLINIC PHASE; PHASE STABILITY; PLASMA-SPRAYED ZIRCONIA BASED;

ANNEALING; DENSIFICATION; ELASTIC MODULI; FRACTURE TOUGHNESS; GRAIN GROWTH; MECHANICAL PROPERTIES; MICROCRACKS; MICROHARDNESS; PLASMA SPRAYING; SINTERING; THERMAL CONDUCTIVITY; ZIRCONIA;

THERMAL BARRIER COATINGS;

EID: 27644540559     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2005.00504.x     Document Type: Article

References (44)

1. R. A. Miller, "Current Status of Thermal Barrier Coatings An - Overview," Surf. Coat. Technol., 30, 1-11 (1987).
2. R. A. Miller, "Thermal Barrier Coatings for Aircraft Engines - History and Direction;" pp. 17-34 in NASA CP-3312, Edited by W. J. Brindley. National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 1995.
3. T. M. Yonushonis, "Thick Thermal Barrier Coatings for Diesel Components;" NASA CR-187111, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 1991.
4. H. E. Eaton and R. C. Novak, "Sintering Studies of Plasma-Sprayed Zirconia," Surf. Coat. Technol., 32, 227-36 (1987).
5. 2 Thermal Barrier Coatings," Surf. Coat. Technol., 123, 147-58 (2000).
6. D. Zhu and R. A. Miller, "Thermal Conductivity and Elastic Modulus Evolution of Thermal Barrier Coatings Under High Heat Flux Conditions," J. Thermal Spray Technol., 9 [2] 175-80 (2000).
7. R. W. Trice, D. W. Prine, and K. T. Faber, "Deformation Mechanisms in Compressed-Loaded, Stand-Alone Plasma-Sprayed Alumina Coatings," J. Am. Ceram. Soc., 83 [12] 3057-64 (2000).
8. J. A. Thompson and T. W. Clyne, "The Effect of Heat Treatment on the Stiffness of Zirconia Top Coals in Plasma-Sprayed TBCs," Acta Mater., 49, 1565-75 (2001).
9. R. W. Steinbrech, "Thermomechanical Behavior of Plasma-Sprayed Thermal Barrier Coatings," Ceram. Eng. Sci. Proc., 23 [4] 397-408 (2002).
10. S. R. Choi, D. Zhu, and R. A. Miller, "Effect of Sintering on Mechanical and Physical Properties of Plasma-Sprayed Thermal Barrier Coatings;" NASA/TM-2004-212625, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 2004.
11. D. Zhu and R. A. Miller, "Influence of High Cycle Thermal Loads on Thermal Fatigue Behavior of Thick Thermal Barrier Coatings;" NASA/TP 3676, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 1997.
12. D. Zhu and R. A. Miller, "Sintering and Creep Behavior of Plasma-Sprayed Zirconia- and Hafnia-Based Thermal Barrier Coatings," Surf. Coat. Technol., 108-109, 114-20 (1998).
13. 3 Thermal Barrier Coatings," Int. J. Appl. Ceram. Technol., 1 [4] 330-42 (2004).
14. 3," Ceram. Eng. Sci. Proc., 19 [4] 293-301 (1998);
15. 3 Thermal Barrier Coatings in Biaxial Flexure and Trans-Thickness Tension," Ceram. Eng. Sci. Proc., 21 [4] 653-61 (2000);
16. 3 Thermal Barrier Coatings," Ceram. Eng. Sci. Proc., 22 [4] 427-34 (2001).
17. ASTM C 1161 "Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature;" in Annual Book of ASTM Standards, Vol. 15.01. American Society for Testing and Materials, West Conshohocken, PA, 2003.
18. J. Kübler, "(a) Fracture Toughness of Ceramics Using the SEVNB Method: Preliminary Results," Ceram. Eng. Sci. Proc., 18 [4] 155-62 (1997)
19. (b) "Fracture Toughness of Ceramics Using the SEVNB Method; Round Robin," VAMAS Report No. 37, EMPA, Swiss Federal Laboratories for Materials Testing & Research, Dübendorf, Switzerland, 1999.
20. A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, "Mechanisms Controlling the Durability of Thermal Barrier Coatings," Prog. Mater. Sci., 46, 505-53 (2001).
21. S. R. Choi and J. P. Gyekenyesi, "Fracture Toughness in Advanced Monolithic Ceramics-SEPB vs. SEVNB Methods;" Proceedings of the 11th International Conference on Fracture (ICF11), Turin, Italy, March 20-25, 2005.
22. S. R. Choi, D. Zhu, and R. A. Miller, "Fracture Behavior under Mixed-Mode Loading of Ceramic Plasma-Sprayed Thermal Barrier Coatings at Ambient and Elevated Temperatures," Eng. Fract. Mech., in press.
23. ASTM C 1421 "Test Method for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature;" in Annual Book of ASTM Standards, Vol. 15.01. American Society for Testing and Materials, West Conshohocken, PA, 2002.
24. S. Suresh, C. F. Shih, A. Morrone, and N. P. O'Dowd, "Mixed-Mode Fracture Toughness of Ceramic Materials," J. Am. Ceram. Soc., 73 [5] 1257-67 (1990).
25. K. J. Wang, H. C. Lin, and K. Hua, "Calculation of Stress Intensity Factors for Combined Mode Bend Specimens;" pp. 123-33 in Advances in Research on the Strength and Fracture of Materials, Vol. 4, Edited by M. D. R. Taplin. ICF4, Waterloo, Canada, 1977.
26. M. Y. He and J. W. Hutchinson, "Asymmetric Four-Point Crack Specimen," J. Appl. Mech., 67, 207-9 (2000).
27. Y. Murakami (ed.), Stress Intensity Factors Handbook, Vol. 1, p. 16. Pergamon Press, New York, 1987.
28. J. E. Srawley and B. Gross, "Side-Cracked Plates Subjected to Combined Direct and Bending Forces;" pp. 559-79 in Cracks and Fracture, ASTM STP 601. American Society for Testing and Materials, Philadelphia, 1976.
29. ASTM C 1259 "Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration;" in Annual Book of ASTM Standards, Vol. 15.01. American Society for Testing and Materials, West Conshohocken, PA, 2003.
30. C. A. Johnson, J. A. Rudd, A. C. Kaya, and H. G. dcLorenzi, "A Method for Measuring Non-Linear Elastic Properties of Thermal Barrier Coatings;" pp. 415-20 Proceedings of the 8th National Thermal Spray Conference, September 11-15, Houston TX, 1995.
31. ASTM C 1327 "Test Method for Vickers Indentation Hardness of Advanced Ceramics;" in Annual Book of ASTM Standards, Vol. 15.01. American Society for Testing and Materials, West Conshohocken, PA, 2003.
32. R. A. Miller, R. G. Garlick, and J. L. Smialek, "Phase Distributions in Plasma-Sprayed Zirconia-Yttria," Am. Ceram. Soc. Bull., 62 [12] 1355-8 (1983).
33. S. R. Choi and N. P. Bansal, "Mechanical Behavior of Zirconia/Alumina Composites," Ceram. Int., 31, 39-46 (2005).
34. D. K. Shetty, A. R. Rosenfield, and W. H. Duckworth, "Mixed-Mode Fracture of Ceramics in Diametral Compression," J. Am. Ceram. Soc., 69 [6] 437-43 (1986).
35. V. Tikare and S. R. Choi, "Combined Mode I and Mode II Fracture of Monolithic Ceramics," J. Am. Ceram. Soc., 76 [9] 2265-72 (1993).
36. V. Tikare and S. R. Choi, "Combined Mode I-Mode II Fracture of 12-Mol%-Ceria-Doped Tetragonal Zirconia Polycrystalline Ceramic," J. Am. Ceram. Soc., 80 [6] 1624-6 (1997).
37. I. S. Raju and J. C. Newman, "Stress-Intensity Factors for a Wide Range of Semi-Elliptical Surface Cracks in Finite-Thickness Plates," Eng. Fract. Mech., 11, 817-29 (1979).
38. K. F. Wesling, D. F. Socie, and B. Beardsley, "Fatigue of Thick Thermal Barrier Coatings," J. Am. Ceram. Soc., 77 [7] 1863-8 (1994).
39. S. R. Choi, NASA Glenn Research Center, Cleveland, OH, 2004, unpublished work.
40. A. J. Allen, G. G. Long, Y. Wallace, Y. Llavsky, C. C. Berndt, and H. Hermann, "Microstructural Changes in YSZ Deposits During Annealing;" pp. 228-33 in Proceedings of the Unified Thermal Spray Conference, Edited by E. Lugscheider, and P. A. Kammer. DVS, Germany, 1999.
41. J. I. Eldridge, G. N. Morscher, and S. R. Choi, "Quasistatic vs. Dynamic Modulus Measurements of Plasma-Sprayed Thermal Barrier Coatings," Ceram. Eng. Sci. Proc., 23 [4] 371-8 (2002).
42. 2 Coatings," Surface and Coatings Technology, 155, 1-10 (2002).
43. D. Zhu and R. A. Miller, "Thermal Barrier Coatings for Advanced Gas-Turbine Engines," MRS Bull., 25 [7] 43-7 (2000).
44. D. Zhu and R. A. Miller, "Determination of Creep Behavior of Thermal Barrier Coatings Under Laser Imposed High Thermal and Stress Gradient Conditions," J. Mater. Res., 14 [1] 146-61 (1999).