Structural optimization of the fibre-reinforced composite substructure in a three-unit dental bridge

Dental Materials

Volumn 25, Issue 6, 2009, Pages 791-801

  Shi, Li ^a   Fok, Alex S L ^b  

^a TSINGHUA UNIVERSITY   (China)

^b UNIVERSITY OF MINNESOTA   (United States)

Author keywords

Fibre reinforced composites; Fixed partial dentures; Structural optimization

Indexed keywords

ADAPTIVE GROWTHS; FE ANALYSIS; FIBRE-REINFORCED COMPOSITES; FINITE ELEMENTS; FIXED PARTIAL DENTURES; FRACTURE RESISTANCES; IN-VITRO; MAXIMUM PRINCIPAL STRESS; MECHANICAL PERFORMANCE; OPTIMAL ARRANGEMENTS; OPTIMIZATION METHODS; OPTIMIZED DESIGNS; ORTHOTROPIC MATERIALS; PROGRAM ABAQUS; STRESS REDUCTIONS; VENEERING COMPOSITES;

BIOLOGICAL MATERIALS; DENTISTRY; FIBER REINFORCED PLASTICS; FIBERS; FLAT PANEL DISPLAYS; FRACTURE; GROWTH (MATERIALS); SHAPE OPTIMIZATION; STRUCTURAL DESIGN; VENEERS;

STRUCTURAL OPTIMIZATION;

DENTAL POLYGLASS; GLASS; GLASS FIBER; GLASS IONOMER; RESIN; SILICATE CEMENT;

ARTICLE; CHEMISTRY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTURE; FINITE ELEMENT ANALYSIS; MATERIALS TESTING; METHODOLOGY; SHEAR STRENGTH; TENSILE STRENGTH; YOUNG MODULUS;

COMPOSITE RESINS; DENTAL BONDING; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTAL VENEERS; DENTURE DESIGN; DENTURE, PARTIAL, FIXED; ELASTIC MODULUS; FINITE ELEMENT ANALYSIS; GLASS; GLASS IONOMER CEMENTS; MATERIALS TESTING; SHEAR STRENGTH; SILICATE CEMENT; TENSILE STRENGTH;

EID: 67349165843     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.01.001     Document Type: Article

References (46)

1. Spyrides S.M.M., and Bastian F.L. In vitro comparative study of the mechanical behavior of a composite matrix reinforced by two types of fibers (polyethylene and glass). Materials Science and Engineering C 24 5 (2004) 671-677
2. Garoushi S., and Vallittu P.K. Fiber-reinforced composites in fixed partial dentures. Libyan Journal of Medicine (2006) AOP:060802
3. Kolbeck C., Rosentritt M., Behr M., Lang R., and Handel G. In vitro examination of the fracture strength of 3 different fiber-reinforced composite and 1 all-ceramic posterior inlay fixed partial denture systems. Journal of Prosthodontics 11 4 (2002) 248-253
4. Rosentritt M., Behr M., Kolbeck C., and Handel G. In vitro repair of three-unit fiber-reinforced composite FPDs. International Journal of Prosthodontics 14 4 (2001) 344
5. Vallittu P.K. Survival rates of resin-bonded, glass fiber-reinforced composite fixed partial dentures with a mean follow-up of 42 months: a pilot study. Journal of Prosthetic Dentistry 91 3 (2004) 241
6. Göhring T.N., and Roos M. Inlay-fixed partial dentures adhesively retained and reinforced by glass fibers: clinical and scanning electron microscopy analysis after five years. European Journal of Oral Sciences 113 1 (2005) 60-69
7. Freilich M.A., Meiers J.C., Duncan J.P., Eckrote K.A., and Goldberg A.J. Clinical evaluation of fiber-reinforced fixed bridges. Journal of the American Dental Association 133 11 (2002) 1524
8. Ozcan M., Breuklander M.H., and Vallittu P.K. The effect of box preparation on the strength of glass fiber-reinforced composite inlay-retained fixed partial dentures. The Journal of Prosthetic Dentistry 93 4 (2005) 337
9. Behr M., Rosentritt M., Leibrock A., Schneider-Feyrer S., and Handel G. In-vitro study of fracture strength and marginal adaption of fibre-reinforced adhesive fixed partial inlay dentures. Journal of Dentistry 27 2 (1999) 163
10. Dyer S.R., Lassila L.V., Alander P., and Vallittu P.K. Static strength of molar region direct technique glass fibre-reinforced composite fixed partial dentures. Journal of Oral Rehabilitation 32 5 (2005) 351-357
11. Dyer S.R., Sorensen J.A., Lassila L.V., and Vallittu P.K. Damage mechanics and load failure of fiber-reinforced composite fixed partial dentures. Dental Materials 21 12 (2005) 1104
12. Xie Q., Lassila L.V.J., and Vallittu P.K. Comparison of load-bearing capacity of direct resin-bonded fiber-reinforced composite FPDs with four framework designs. Journal of Dentistry 35 7 (2007) 578
13. Song H.Y., Yi Y.J., Cho L.R., and Park D.Y. Effects of two preparation designs and pontic distance on bending and fracture strength of fiber-reinforced composite inlay fixed partial dentures. Journal of Prosthetic Dentistry 90 4 (2003) 347-353
14. Ellakwa A.E., Shortall A.C., and Marquis P.M. Influence of different techniques of laboratory construction on the fracture resistance of Fiber-Reinforced Composite (FRC) bridges. Journal of Contemporary Dental Practice 5 4 (2004) 1-13
15. Li W., Swain M.V., Li Q., Ironside J., and Steven G.P. Fibre reinforced composite dental bridge. Part I. Experimental investigation. Biomaterials 25 20 (2004) 4987-4993
16. Vallittu P.K. The effect of glass fiber reinforcement on the fracture resistance of a provisional fixed partial denture. The Journal of Prosthetic Dentistry 79 2 (1998) 125
17. Hamza T.A., Rosenstiel S.F., Elhosary M.M., and Ibraheem R.M. The effect of fiber reinforcement on the fracture toughness and flexural strength of provisional restorative resins. Journal of Prosthetic Dentistry 91 3 (2004) 258
18. Dyer S.R., Lassila L.V., Jokinen M., and Vallittu P.K. Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dental Materials 20 10 (2004) 947
19. Garoushi S.K., Lassila L.V., and Vallittu P.K. Short fiber reinforced composite: the effect of fiber length and volume fraction. Journal of Contemporary Dental Practice 7 5 (2006) 010-017
20. Kanie T., Fujii K., Arikawa H., and Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dental Materials 16 2 (2000) 150-158
21. Chung K., Lin T., and Wang F. Flexural strength of a provisional resin material with fibre addition. Journal of Oral Rehabilitation 25 3 (1998) 214
22. van Heumen C.C.M., Kreulen C.M., Bronkhorst E.M., Lesaffre E., and Creugers N.H. Fiber-reinforced dental composites in beam testing. Dental Materials 24 11 (2008) 1435-1443
23. Krenchel H. Fibre reinforcement. Thesis. Copenhagen: Technical University of Denmark; 1963.
24. Dyer S.R., Lassila L.V., Jokinen M., and Vallittu P.K. Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials. Journal of Prosthetic Dentistry 94 3 (2005) 219-226
25. Narva K.K., Lassila L.V., and Vallittu P.K. Flexural fatigue of denture base polymer with fiber-reinforced composite reinforcement. Composites Part A: Applied Science and Manufacturing 36 9 (2005) 1275
26. Tanimoto Y., Nishiwaki T., and Nemoto K. Numerical failure analysis of glass-fiber-reinforced composites. Journal of Biomedical Materials Research-Part A 68 1 (2004) 107-113
27. Nakamura T., Ohyama T., Waki T., Kinuta S., Wakabayashi K., Takano N., et al. Finite element analysis of fiber-reinforced fixed partial dentures. Dental Materials Journal 24 2 (2005) 275-279
28. Rappelli G., Scalise L., Procaccini M., and Tomasini E.P. Stress distribution in fiber-reinforced composite inlay fixed partial dentures. Journal of Prosthetic Dentistry 93 5 (2005) 425-432
29. Magne P., Perakis N., Belser U.C., and Krejci I. Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design. Journal of Prosthetic Dentistry 87 5 (2002) 516-528
30. Nowak M.O., Haser K., and Goldberg A.J. Finite element analysis of fiber composite dental bridges: the effect of length/depth ratio and load application method. American Society of Mechanical Engineers, Bioengineering Division (Publication) BED 43 (1999) 249-250
31. Li W., Swain M.V., Li Q., Ironside J., and Steven G.P. Fibre reinforced composite dental bridge. Part II. Numerical investigation. Biomaterials 25 20 (2004) 4995-5001
32. Proos K., Steven G., Swain M., and Ironside J. Preliminary studies on the optimum shape of dental bridges. Computer Methods in Biomechanics and Biomedical Engineering 4 1 (2000) 77
33. Xie Y.M., and Steven G.P. A simple evolutionary procedure for structural optimization. Computers & Structures 49 5 (1993) 885
34. Brighenti R. Fibre distribution optimisation in fibre-reinforced composites by a genetic algorithm. Composite Structures 71 1 (2005) 1-15
35. Duvaut G.I., Terrel G., Lene F., and Verijenko V.E. Optimization of fiber reinforced composites. Composite Structures 48 1-3 (1999) 83-89
36. Zhou K., and Li X. Topology optimization of structures under multiple load cases using a fiber-reinforced composite material model. Computational Mechanics 38 2 (2006) 163-170
37. Lekholm U., and Zarb G.A. Patient selection and preparation. Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry (1985) 199-209
38. MSC.Patran, User's Manual. Version 2001. MSC.Software Corporation; 2001.
39. ABAQUS version 6.5 User Manuals. Pawtucket, RI, U.S.A.: Hibbett, Karlsson and Sorensen Inc.; 2004.
40. Krejci I., Boretti R., Giezendanner P., and Lutz F. Adhesive crowns and fixed partial dentures fabricated of ceromer/FRC: clinical and laboratory procedures. Practical Periodontics and Aesthetic Dentistry 10 (1998) 487-498
41. Waltimo A., and Könönen M. Bite force on single as opposed to all maxillary front teeth. Scandinavian Journal of Dental Research 102 6 (1994) 372-375
42. Ferrario V.F., Sforza C., Serrao G., Dellavia C., and Tartaglia G.M. Single tooth bite forces in healthy young adults. Journal of Oral Rehabilitation 31 1 (2004) 18-22
43. Shi L., Fok A.S., and Qualtrough A. A two-stage shape optimization process for cavity preparation. Dental Materials 24 11 (2008) 1444-1453
44. Nohrstrom T.J., Vallittu P.K., and Yli-Urpo A. The effect of placement and quantity of glass fibers on the fracture resistance of interim fixed partial dentures. International Journal of Prosthodontics 13 1 (2000) 72
45. Vallittu P.K. Glass fiber reinforcement in repaired acrylic resin removable dentures: preliminary results of a clinical study. Quintessence International 28 1 (1997) 39
46. Craig P.D., and Summerscales J. Poisson's ratios in glass fibre reinforced plastics. Composite Structures 9 3 (1988) 173-188