New nano-sized Al2O3-BN coating 3Y-TZP ceramic composites for CAD/CAM-produced all-ceramic dental restorations. Part I. Fabrication of powders

Nanomedicine: Nanotechnology, Biology, and Medicine

Volumn 5, Issue 2, 2009, Pages 232-239

  Yang, Se Fei ^a   Yang, Li Qiang ^b   Jin, Zhi Hao ^b   Guo, Tian Wen ^c   Wang, Lei ^c   Liu, Hong Chen ^a  

^a CHINESE PLA GENERAL HOSPITAL   (China)

^b XI'AN JIAOTONG UNIVERSITY   (China)

^c FOURTH MILITARY MEDICAL UNIVERSITY   (China)

Author keywords

All ceramic prostheses; Dental material; Machinable ceramics; Powders and chemical preparation; Zirconia

Indexed keywords

ALL-CERAMIC; ALL-CERAMIC PROSTHESES; ALUMINUM OXIDES; AMORPHOUS BORON NITRIDE; BN COATING; BORIC ACIDS; CAD/CAMS; CERAMIC COMPOSITES; COATING PROCESS; COMPOSITE POWDERS; DENTAL RESTORATIONS; HETEROGENEOUS PRECIPITATION; HIGH STRENGTH; IN-SITU REACTIONS; MACHINABLE CERAMICS; NANO-SIZED; SHAPE DISTORTIONS; TEM; XRD PATTERNS; ZIRCONIUM DIOXIDE;

ALUMINUM; BORON; BORON NITRIDE; CERAMIC MATERIALS; COMPUTER AIDED DESIGN; COMPUTER AIDED MANUFACTURING; DENTAL COMPOSITES; DENTAL PROSTHESES; FILLING; INORGANIC ACIDS; MECHANICAL PROPERTIES; NITRIDES; POWDER METALLURGY; POWDERS; PRECIPITATION (CHEMICAL); RESTORATION; SINTERING; TRANSMISSION ELECTRON MICROSCOPY; UREA; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS; ZIRCONIA; ZIRCONIUM; ZIRCONIUM ALLOYS;

YTTRIUM ALLOYS;

ALUMINUM OXIDE; AMMONIA; BIOMEDICAL AND DENTAL MATERIALS; BORIC ACID; BORON NITRIDE NANOTUBE; NANOPARTICLE; ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; CHEMICAL REACTION; COMPOSITE MATERIAL; COMPUTER AIDED DESIGN; HEATING; MATERIAL COATING; NANOFABRICATION; PARTICLE SIZE; POWDER; PRECIPITATION;

ALUMINUM OXIDE; BIOCOMPATIBLE MATERIALS; BORON COMPOUNDS; CERAMICS; COMPUTER-AIDED DESIGN; DENTAL IMPLANTS; METAL NANOPARTICLES; MICROSCOPY, ELECTRON, TRANSMISSION; POWDERS; X-RAY DIFFRACTION; YTTRIUM; ZIRCONIUM;

EID: 67349154521     PISSN: 15499634     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.nano.2008.10.004     Document Type: Article

References (55)

1. Brecker C.S. Porcelain baked to gold: a new medium in prosthodontics. J Prosthet Dent 6 (1956) 801-810
2. Kelly J.R., Tesk J.A., and Sorensen J.A. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modelling. J Dent Res 74 (1995) 1253-1258
3. Vrijhoef M.M.A., Spanauf A.J., and Renggli H.H. Axial strengths of foil, all-ceramic and PFM molar crowns. Dent Mater 4 (1988) 15-19
4. Christensen G.J. Ceramic vs porcelain-fused-to-metal crowns: give your patients a choice. J Am Dent Assoc 125 (1994) 311-314
5. Schmalz G., Schuster U., and Schweikl H. Influence of metals on IL-6 release in vitro. Biomaterials 19 (1998) 1689-1694
6. Donovan T.E., and Cho G.C. Soft tissue management with metal-ceramic and all-ceramic restorations. J Calif Dent Assoc 26 (1998) 107-112
7. Cattell M.J., Knowles J.C., Clarke R.L., and Lynch E.J.R. The biaxial flexural strength of two pressable ceramic systems. J Dent 27 (1999) 183-196
8. Höland W., Schweiger M., Frank M., and Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res (Appl Biomater) 53 (2000) 297-303
9. Jung Y.G., Peterson I.M., Pajares A., and Lawn B.R. Contact damage resistance and strength degradation of glass-infiltrated alumina and spinel ceramics. J Dent Res 78 (1999) 804-814
10. Chong K.H., Chai J., Takahashi Y., and Wozniak W. Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials. Int J Prosthodont 15 (2002) 183-188
11. Massimiliano G., Mohammad A., Simon P.R., and Michael V.S. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent Mater 20 (2004) 441-448
12. Curtis A.R., Wright A.J., and Fleming G.J.P. The influence of simulated masticatory loading regimes on the bi-axial flexure strength and reliability of a Y-TZP dental ceramic. J Dent 34 (2006) 317-325
13. Fischer H., Maier H.R., and Marx R. Improved reliability of leucite reinforced glass by ion exchange. Dent Mater 16 (2000) 120-128
14. Chevalier J., Olagnon C., and Fantozzi G. Subcritical crack propagation in 3Y-TZP ceramics: static and cyclic fatigue. J Am Ceram Soc 82 (1999) 3128-3129
15. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength,fracture toughness and microstructure of a selection of all-ceramic materials. Part II: zirconia-based dental ceramics. Dent Mater 20 (2004) 449-456
16. Rizkalla A.S., and Jones D.W. Mechanical properties of commercial high strength ceramic core materials. Dent Mater 20 (2004) 207-212
17. Ardlin B.I. Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure. Dent Mater 18 (2002) 590-595
18. Swain M.V. Limitation of maximum strength of zirconia-toughened ceramics by transformation toughening increment. J Am Ceram Soc 68 (1985) C97-C99
19. Srdic V.V., and Radonjic L. Transformation toughening of sol-gel derived alumina-zirconia composites. J Am Ceram Soc 80 (1997) 2056-2060
20. Casellas D., Feder A., Llanes L., and Anglada M. Fracture toughness and mechanical strength of Y-TZP/PSZ ceramics. Scripta Mater 45 (2001) 213-220
21. Llusar M., Rodrigues C., Labrincha J., Flores M., and Monrós G. Reinforcement of single-firing ceramic glazes with the addition of polycrystalline tetragonal zirconia (3Y-TZP) or zircon. J Eur Ceram Soc 22 (2002) 639-652
22. 3 ceramics. J Am Ceram Soc 69 (1986) 638-640
23. Guazzato M., Albakry M., Quach L., and Swain M.V. Influence of grinding, sandblasting, polishing and heat treatment on the flexural strength of a glass-infiltrated alumina-reinforced dental ceramic. Biomaterials 25 (2004) 2153-2160
24. 3 mixtures. J Am Ceram Soc (1986) 69-83
25. 3 prepared from Zr-Al organometallic compounds. J Mater Sci 23 (1988) 332
26. 3 ceramics formed by hot-isostatic pressing. In: Somiya S., Yamamoto N., and Hanagida H. (Eds). Advances in ceramics, science and technology of zirconia III (1988), The American Ceramics Society, Inc., Columbus (Ohio) 709
27. 3 composites. J Mater Sci 23 (1988) 1805-1812
28. Taruta S., Takeshi H., and Kitajima K. Preparation of machinable cordierite/mica composite by low-temperature sintering. J Eur Ceram Soc 24 (2004) 3149-3154
29. Wang R., Pan W., Jiang M., Chen J., and Luo Y. Investigation of the physical and mechanical properties of hot-pressed machinable Si3N4/h-BN composites and FGM. Mater Sci Eng B90 (2002) 261-268
30. Kusunose T., Sekino T., Choa Y.H., and Niihara K. Fabrication and microstructure of silicon nitride/boron nitride nanocomposites. J Am Ceram Soc 85 (2002) 2678-2688
31. Kusunose T., Sekino T., Choa Y.H., and Niihara K. Machinability of silicon nitride/boron nitride nanocomposites. J Am Ceram Soc 85 (2002) 2689-2695
32. 4 ceramic composite. Mater Design 23 (2002) 565-570
33. Davis J.B., Marshall D.B., Housley R.M., and Morgan P.E.D. Machinable ceramics containing rare-earth phosphates. J Am Ceram Soc 81 (1998) 2169-2175
34. 2 composites. Mater Res Bull 37 (2002) 1107-1115
35. 4 composite ceramics by liquid precursor infiltration. J Eur Ceram Soc 23 (2003) 1649-1654
36. Pullar R.C., Taylor M.D., and Bhattacharya A.K. The manufacture of partially-stabilised and fully-stabilised zirconia fibres blow spun from an alkoxide derived aqueous sol-gel precursor. J Eur Ceram Soc 21 (2001) 19-27
37. André R.S., Frank F., Peter K., Heinz L., and Ludwig J.G. Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges. Dent Mater 23 (2006) 177-185
38. Filser F., Lüthy H., Scharer P., and Gauckler L. All-ceramic restorations by new direct ceramic machining process (DCM) [abstract 1046]. J Dent Res 77 (1998) 762
39. Kelly J.R. Ceramics in restorative and prosthetic dentistry. Annu Rev Mater Sci 27 (1997) 443-468
40. Lüthy H., Filser F., Gauckler L., and Scharer P. High reliable zirconia bridges by direct ceramic machining process (DCM) [abstract 1045]. J Dent Res 77 (1998) 762
41. Witek S.R., and Butler E.P. Zirconia particles coarsening and the effect of zirconia additions on the mechanical properties of certain commercial aluminas. J Am Ceram Soc 69 (1986) 523-529
42. Swain M.V., and Hannink R.H.J. Metastability of the martensitic transformation in a 12 mol% ceria-zirconia alloy: grinding studies. J Am Ceram Soc 72 (1989) 1358-1364
43. 2 composites. Mater Sci Eng 71 (1985) 57-64
44. 3. J Am Ceram Soc 69 (1986) 195-197
45. Evans A.G. Perspective on the development of high-toughness ceramics. J Am Ceram Soc 73 (1990) 187-206
46. Swain M.V. Toughening mechanisms for ceramics. Mater Forum 13 (1989) 237-253
47. 3 impurities on the microstructure and properties of Y-TZP. J Mater Process Technol 92-93 (1999) 85-90
48. Scott H. Phase relationship in zirconia-yttria system. J Mater Sci 10 (1975) 1527-1535
49. Levin E.M., McMurdie H.F., and Reser R.K. Phase diagrams for ceramists (1975), American Ceramics Society, Columbus (Ohio) [Figure 4378]
50. 5 addition. Solid State Ionics 172 (2004) 413-416
51. 3 composite powders. J Eur Ceram Soc 15 (1995) 959-965
52. Nistor L., Teodorescu V., Ghica C., Landuyt J.V., Dinca G., and Georgeoni P. The influence of the h-BN morphology and structure on the c-BN growth. Diamond Relat Mater 10 (2001) 1352-1356
53. Pease R.S. An X-ray study of boron nitride. Acta Crystallogr 5 (1952) 356
54. Cho W.S., Piao Z.H., Lee K.J., Yoo Y.C., Lee J.H., Cho M.W., et al. Microstructure and mechanical properties of AlN-hBN based machinable ceramics prepared by pressureless sintering. J Eur Ceram Soc 27 (2007) 1425-1430
55. Funahashi T., and Isomur K. AlN composites ceramics. Ceramics 26 (1991) 749-753