Key performance indicators for inherent safety: Application to the hydrogen supply chain

Process Safety Progress

Volumn 28, Issue 2, 2009, Pages 156-170

  Tugnoli, Alessandro ^a   Landucci, Gabriele ^b   Cozzani, Valerio ^a  

^a UNIVERSITY OF BOLOGNA   (Italy)

^b UNIVERSITY OF PISA   (Italy)

Author keywords

Hydrogen production; Hydrogen storage; Inherent safety; Key performance indicators; Risk analysis; Supply chain

Indexed keywords

CONSEQUENCE MODELING; DESIGN OPTION; EARLY DESIGN STAGES; EQUIPMENT CHARACTERISTICS; HYDROGEN SUPPLY; IN-PROCESS; INHERENT SAFETY; KEY PERFORMANCE INDICATORS; PHYSICAL PARAMETERS; PROCESS CONDITION; PROCESS SCHEMES; QUANTITATIVE APPROACH; SYSTEMATIC ASSESSMENT;

BENCHMARKING; GAS PRODUCERS; HYDROGEN STORAGE; RISK ANALYSIS; RISK ASSESSMENT; SAFETY FACTOR; SUPPLY CHAIN MANAGEMENT; SUPPLY CHAINS; USER INTERFACES;

HYDROGEN PRODUCTION;

EID: 67149144432     PISSN: 10668527     EISSN: 15475913     Source Type: Journal    
DOI: 10.1002/prs.10303     Document Type: Article

References (56)

1. T.A. Kletz, Process Plants: A Handbook for Inherent Safer Design, 2nd ed., Taylor & Francis, Philadelphia (PA), 1998.
2. F.I. Khan and P.R. Amyotte, How to make inherent safety practice a reality, Can J Chem Eng 81 (2003), 2-16.
3. D.C. Hendershot, Inherently safer chemical process design, J Loss Prev Process Industries 10 (1997), 151-157.
4. A. Tugnoli, V. Cozzani, and G. Landucci, A consequence based approach to the quantitative assessment of inherent safety, AIChE J 53 (2007), 3171-3182.
5. V. Cozzani, A. Tugnoli, and E. Salzano, Prevention of domino effect: From active and passive strategies to inherently safer design, J Hazard Mater A139 (2007), 209-219.
6. V. Cozzani, A. Tugnoli, and E. Salzano, The development of an inherent safety approach to the prevention of domino accidents, Accid Anal Prev (in press). doi: 10.1016/j.aap.2008.06.002.
7. G. Koller, U. Fischer, and K. Hungerbühler, Comparison of methods suitable for assessing the hazard potential of chemical processes during early design phases, Trans IChemE Part B 79 (2001), 157-166.
8. F.I. Khan, R. Sadiq, and P. R. Amyotte, Evaluation of available indices for inherently safer design options, Process Safety Progress 22 (2003), 83-97.
9. D.W. Edwards and D. Lawrence, Assessing the inherent safety of chemical process routes: Is there a relation between plant cost and inherent safety? Trans IchemE Part B 71 (1993), 252-258.
10. J.P. Gupta and D.W. Edwards, A simple graphical method for measuring inherent safety, J Hazard Mater 104 (2003), 15-30.
11. A. Heikkilä, M. Hurme, and M. Järveläinen, Safety considerations in process synthesis, Comp Chem Eng 20 (1996), S115-S120.
12. M. Gentile, W.J. Rogers, and M.S. Mannan, Development of an inherent safety index based on fuzzy logic, AIChE J 49 (2003), 959-968.
13. C. Palaniappan, R. Srinivasan, and R. Tan, Expert system for the design of inherently safer processes. 1. Route selection stage, Ind Eng Chem Res 41 (2002), 6698-6710.
14. C. Palaniappan, R. Srinivasan, and R. Tan, Expert system for the design of inherently safer processes. 2. Flowsheet development stage, Ind Eng Chem Res 41 (2002), 6711-6722.
15. G. Koller, U. Fischer, and K. Hungerbuhler, Assessing safety, health, and environmental impact early during process development, Ind Eng Chem Res 39 (2000), 960-972.
16. INSIDE Project, The INSET Toolkit, Integrated version, 2001.
17. C.T. Leong and A.M. Shariff, Inherent safety index module (ISIM) to assess inherent safety level during preliminary design stage, Trans Inst Chem Eng: Process Safety Environ Prot 86 (2008), 113-119.
18. F.I. Khan and P.R. Amyotte, Integrated inherent safety index (I2SI): A tool for inherent safety evaluation, Process Safety Progress 23 (2004), 136-148.
19. F.I. Khan and P.R. Amyotte, I2SI: A comprehensive quantitative tool for inherent safety and cost evaluation, J Loss Prev Process Indus 18 (2005), 310-326.
20. A. Tugnoli, F. Khan, P. Amyotte, and V. Cozzani, Safety assessment in plant layout design using indexing approach: Implementing inherent safety perspective. Part 1-Guideword applicability and method description, J Hazard Mater 160 (2008), 100-109.
21. A. Tugnoli, F. Khan, P. Amyotte, and V. Cozzani, Safety assessment in plant layout design using indexing approach: Implementing inherent safety perspective. Part 2-domino hazard index and case study, J Hazard Mater 160 (2008), 110-121.
22. G. Landucci, A. Tugnoli, and V. Cozzani, Inherent safety key performance indicators for hydrogen storage systems, J Hazard Mater 159 (2008), 554-566.
23. G. Landucci, A. Tugnoli, C. Nicolella, and V. Cozzani, "Assessment of inherently safer technologies for hydrogen storage," Proceedings of the 12th International Symposium Loss Prevention and Safety Promotion in the Process Industries, Edinburgh (UK), IChemE Symposium Series no. 153, Rugby (UK), 2007, 1191-1196.
24. G. Landucci, A. Tugnoli, C. Nicolella, and V. Cozzani, "Assessment of inherently safer technologies for hydrogen production", Proceedings of the 5th International Seminar on Fire and Explosion Hazards, Edinburgh (UK), IChemE Symposium Series no. 153, Rugby (UK), 2007.
25. G. Landucci, A. Tugnoli, and V. Cozzani, "The assessment of inherent safety and escalation hazard in the early stage design of hydrogen storage plants", Proceedings of the CISAP 3, Rome (I), 2008, 147-154.
26. P.A.M. Uijt de Haag and B.J.M. Ale, Guidelines for Quantitative Risk Assessment (Purple Book), Committee for the Prevention of Disasters, The Hague (NL), 1999.
27. American Petroleum Institute, Risk-Bases Inspection Base Resource Document, API Standard 581, 1st ed., API, Washington, DC, 2000.
28. C. Delvosalle, C. Fievez, A. Pipart, and B. Debray, ARAMIS project: A comprehensive methodology for the identification of reference accident scenarios in process industries, J Hazard Mater 130 (2006), 200-219.
29. C.J.H. Van Den Bosh and R.A.P.M. Weterings, Methods for the Calculation of Physical Effects (Yellow Book), 3rd ed., Committee for the Prevention of Disasters, The Hague (NL), 1997.
30. Mannan S. Lees' Loss Prevention in the Process Industries, 3rd ed., Elsevier, Oxford (UK), 2005.
31. F.I. Khan and S.A. Abbasi, The world's worst industrial accident of the 1990s, Process Safety Progress, 18 (1999), 135-145.
32. V. Cozzani, G. Gubinelli, and E. Salzano, Escalation thresholds in the assessment of domino accidental events, J Hazard Mater 129 (2006), 1-21.
33. T.A. Kletz, Inherently safer design-Its scope and future, Trans Inst Chem Eng Part B: Process Safety Environ Prot 81 (2003), 401-405.
34. O.A. Rosyid and D. Jablonski, Risk analysis for the infrastructure of a hydrogen economy, Int J Hydrogen Energy, 32 (2007), 3194-3200.
35. F. Markert, S.K. Nielsen, J.L. Paulsen, and V. Andersen, Safety aspects of future infrastructure scenarios with hydrogen refueling stations, Int J Hydrogen Energy 32 (2007), 2227-2234.
36. S. Kikukawa, Consequence analysis and safety verification of hydrogen fueling stations using CFD simulation, Int J Hydrogen Energy, 33 (2008), 1425-1434.
37. W. McDowall and M. Eames, Towards a sustainable hydrogen economy: A multi-criteria sustainability appraisal of competing hydrogen futures, Int J Hydrogen Energy 32 (2007), 4611-4626.
38. Y.M. Lin, G.K.L. Lee, and M.H. Rei, An integrated purification and production of hydrogen with a palladium membrane-catalytic reactor, Catalysis Today 44 (1998), 343-349.
39. F. Gallucci, L. Paturzo, and A. Basile, A simulation study of the steam reforming of methane in a dense tubular membrane reactor, Int J Hydrogen Energy 29 (2004), 611-617.
40. M. Conte, P.P. Prosini, and S. Passerini, Overview of energy/hydrogen storage: State-of-the-art of the technologies and prospects for nanomaterials, Mater Sci Eng B 108 (2004), 2-8.
41. L. Zhou, Progress and problems in hydrogen storage methods, Renewable Sustainable Energy Rev, 9 (2005), 395-408.
42. N. Takeichi, H. Senoh, T. Yokota, H. Tsuruta, K. Hamada, H. T. Takeshita, H. Tanaka, T. Kiyobayashi, T. Takano, and N. Kuriyama, Hybrid hydrogen storage vessel, a novel high-pressure hydrogen storage vessel combined with hydrogen storage material, Int J Hydrogen Energy 28 (2003), 1121-1129.
43. M.T. Hagstrom, P.D. Lund, and J.P. Vanhanen, Metal hydride hydrogen storage for near-ambient temperature and atmospheric pressure applications, a PDSC STUDY, Int J Hydrogen Energy 20 (1995), 897-909.
44. A. Domashenko, A. Golovchenko, Y. Gorbatsky, V. Nelidov, and B. Skorodumov, Production, storage and transportation of liquid hydrogen. Experience of infrastructure development and operation, Int J Hydrogen Energy 27 (2002), 753-755.
45. F. Mitlitsky, A.H. Weisberg, and B. Myers, "Vehicular hydrogen storage using lightweight tanks," Proceedings of the 2000 US DOE Hydrogen Program Review, NREL/CP-570-28890, Washington (DC), 2001.
46. T.A. Kletz, What you don't have, can't leak, Chem Ind 6 (1978), 287-292.
47. CCPS, Inherently Safer Chemical Processes- A Life Cycle Approach, AIChE, New York, 1996.
48. A. Sarkar and R. Banerjee, Net energy analysis of hydrogen storage options, Int J Hydrogen Energy 30 (2005), 867-877.
49. B.R. Kinzey, A. Ruiz, and P.B. Davis, "The Hydrogen safety program of the U.S. Department of Energy", Proceedings of the 1st International Conference on Hydrogen Safety, Pisa (I), 2005.
50. D. Browning, P. Jones, and K. Packer, An investigation of hydrogen storage methods for fuel cell operation with man-portable equipment, J Power Sources 65 (1997), 187-195.
51. R. Aiello, M.A. Matthews, D.L. Reger, and J.E. Collins, Production of hydrogen gas form novel chemical hydrides, Int J Hydrogen Energy 24 (1999), 1123-1130.
52. 5 hydride reactor, Int J Hydrogen Energy 26 (2001), 957-963.
53. F.I. Khan, T. Husain, and S.A. Abbasi, Safety weighted hazard index (SWeHI) a new, user-friendly tool for swift yet comprehensive hazard identification and safety evaluation in chemical process industries, Trans IChemE Part B 79 (2001), 65-80.
54. Dow Chemical Company, Fire and Explosion Index Hazard Classification Guide, 7th ed., American Institute of Chemical Engineers, New York (NY), 1994.
55. J.P. Gupta and D.W. Edwards, Inherently safer design-present and future, Trans Inst Chem Eng: Process Safety Environ Prot, 80B (2002), 115-125.
56. P. Häussinger, R. Lohmüller, and A.M. Watson, Hydrogen, Ullmann's Encyclopedia of Industrial Chemistry, 6th ed., Vol. 17, Wiley, Weinheim (DE), (2003), pp. 108-123.