A soft computing based optimisation of multi-pass turning processes

International Journal of Materials and Product Technology

Volumn 35, Issue 1-2, 2009, Pages 145-166

  Ojha, D K ^a   Dixit, U S ^a   Davim, J Paulo ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI   (India)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Machining economics; Multi pass turning; Optimisation; Soft computing.

Indexed keywords

CUTTING TOOLS; FINISHING; FUZZY NEURAL NETWORKS; FUZZY SETS; GENETIC ALGORITHMS; SOFT COMPUTING;

FUZZY NUMBERS; MULTI-PASS TURNING; OPTIMISATIONS; PROCESS PARAMETERS; REAL CODED GA; SURFACE FINISHES; TOOL LIFE;

TURNING;

EID: 66149179350     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJMPT.2009.025224     Document Type: Article

References (40)

1. Abburi, N.R. and Dixit, U.S. (2007) 'Multi-objective optimization of multipass turning processes', International Journal of Advanced Manufacturing Technology, Vol.32, pp.902-910. (Pubitemid 46516429)
2. Al-Ahmari, A.M.A. (2001) 'Mathematical model for determining machining parameters in ultipassturning', International Journal of Production Research, Vol.39, pp.3367-3376.
3. Alberti, N. and Perrone, G. (1999) 'Multipass machining operations by using fuzzy possibilistic programming and genetic algorithm', Journal of Engineering Manufacture, Vol.213, pp.261-273.
4. Azouzi, R. and Guillot, M. (1998) 'On-line optimization of turning process using an inverse process neuro controller', Journal of Manufacturing Science and Engineering, Vol.120, pp.101-108. (Pubitemid 128651811)
5. Baykasoglu, A. and Dereli, T. (2002) 'Novel algorithm approach to generate the 'number of passes' and 'depth of cuts' for the optimization routines of multipass machining', International Journal of Production Research, Vol.40, pp.1549-1565. (Pubitemid 34593765)
6. Benardos, P.G. and Vosniakos, G-C. (2003) 'Predicting surface roughness in machining: a review', International Journal of Machine Tools and Manufacture, Vol.43, pp.833-844.
7. Chen, M.C. and Tsai, D.M. (1996) 'A simulated annealing approach for optimization of multipass turning operation', International Journal of Production Research, Vol.34, pp.2803-2825. (Pubitemid 126519741)
8. Chen, M.C. and Chen, K.Y. (2003) 'Optimization of multi-pass turning operations with genetic algorithms: a note', International Journal of Production Research, Vol.41, pp.3385-3388.
9. Cus, F. and Zuperl, U. (2006) 'Approach to optimization of cutting conditions by using artificial neural networks', Journal of Materials Processing Technology, Vol.173, pp.281-290. (Pubitemid 43344284)
10. Deb, K. (2001) Multi Objective Optimization using Evolutionary Algorithm, John Wiley and Sons, London, UK.
11. Deb, K. and Agrawal, R.B. (1995) 'Simulated binary crossover for continuous search space', Complex Systems, Vol.9, pp.115-148. (Pubitemid 126034016)
12. Deb, K. and Agrawal, S. (1999) 'A niched-penalty approach for constraint handling in genetic algorithms', Proceedings of the International conference on Artificial Neural Networks and Genetic Algorithms (ICANNGA-99), pp.235-243, Portoroz, Slovenia.
13. Ermer, D.S. (1971) 'Optimization of constrained machining economics problem by geometric programming', Transaction of the ASME Journal of Engineering for Industry, Vol.93, pp.1067-1072.
14. Ezugwu, E.O., Arthur, S.J. and Hines, E.L. (1995) 'Tool wear prediction using artificial neural networks', Journal of Materials Processing Technology, Vol.49, pp.255-264.
15. Fang, X.D. and Jawahir, I.S. (1994) 'Predicting total machining performance in finish turning using integrated fuzzy set models of the machinability parameters', International Journal of Production Research, Vol.32, No. 4, pp.833-849.
16. Gilbert, W.W. (1950) Economics of Machining, Machining Theory and Practice, Cleveland, OH, pp.465-485.
17. Gupta, R., Batra, J.L. and Lal, G.K. (1995) 'Determination of optimal subdivision of depth of cut in multipass turning with constraints', International Journal of Production Research, Vol. 33, pp.2555-2565.
18. Haupt, R.L. and Haupt, S.E. (2004) Practical Genetic Algorithms, Wiley Interscience, New York.
19. Herrera, F., Lozano, M. and Verdegay, J.L. (1998) 'Tackling real-coded genetic algorithms, operators and tools for behavioural analysis', Artificial Intelligence Review, Vol.12, pp.265-319. (Pubitemid 128514089)
20. Ishbuchi, H. and Tanaka, H. (1991) 'Regression analysis with interval model by neural networks', Proc. IEEE Int. Joint Conf. on Neural Networks, Singapore, pp.1594-1599.
21. Jang, J-S.R., Sun, C-T. and Mizutani, E. (2002) Neuro-Fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence, Prentice-Hall of India Private Limited, New Delhi.
22. Kee, P.K. (1996) 'Development of constrained optimization analysis and strategies for multipass rough turning operations', International Journal of Machine Tools and Manufacture, Vol.36, No. 1, pp.115-127. (Pubitemid 126348428)
23. Kohli, A. and Dixit, U.S. (2005) 'A neural network based methodology for prediction of surface roughness in turning process', International Journal of Advanced Manufacturing Technology, Vol.25, Nos. 1-2, pp.118-129.
24. Lambert, P.K. and Walvekar, A.G. (1978) 'Optimization of multipass machining operations', International Journal of Production Research, Vol.9, pp.247-259.
25. Lee, B.Y. and Tarng, Y.S. (2000) 'Cutting parameter selection for maximizing production rate or minimizing production cost in multistage turning operations', Journal of Material Processing Technology, Vol.105, pp.61-66.
26. Liang, M., Mgwatu, M. and Zuo, M. (2001) 'Integration of cutting parameter selection and tool adjustment decisions for multipass turning', International Journal of Advanced Manufacturing Technology, Vol.17, pp.861-869.
27. Lin, W.S., Lee, B.Y. and Wu, C.L. (2001) 'Modeling the surface roughness and cutting forces for turning', Journal of Material Processing, Vol.108, pp.286-293.
28. Ojha, D.K. (2004) Soft Computing Based Optimization of the Turning Process, MTech Thesis, IIT Guwahati, India.
29. Onwubolu, G.C. and Kumalo, T. (2001) 'Optimization of multipass turning operations with genetic algorithm', International Journal of Production Research, Vol.39, pp.3727-3745. (Pubitemid 35165510)
30. Petropoulos, P.G. (1973) 'Optimal selection of machining rate variables by geometric programming', International Journal of Production Research, Vol.11, pp.305-314.
31. Saravanan, R., Asokan, P. and Vijayakumar, K. (2003) 'Machining parameters optimization for turning cylindrical stock into a continuous finished profile using genetic algorithm (GA) and simulated annealing (SA)', International Journal of Advanced Manufacturing Technology, Vol.21, pp.1-9.
32. Satishkumar, S., Asokan, P. and Kumanan, S. (2006) 'Optimization of depth of cut in multi-pass turning using nontraditional optimization techniques', International Journal of Advanced Manufacturing Technology, Vol.29, pp.230-238. (Pubitemid 43814095)
33. Shin, Y.C. and Joo, Y.S. (1992) 'Optimization of machining condition with practical constraints', International Journal of Production Research, Vol.30, pp.2907-2919.
34. Tan, F.P. and Creese, R.C. (1995) 'A generalized multi-pass machining model for machining parameters selection in turning', International Journal of Production Research, Vol.33, pp.1467-1487.
35. Tosun, N. and Özer, L. (2002) 'A study of tool life in hot machining using artificial neural networks and regression analysis methods', Journal of Materials Processing Technology, Vol.124, pp.99-104.
36. Wang, X., Da, Z.J., Balaji, A.K. and Jawahir, I.S. (2002) 'Performance-based optimal selection of cutting conditions and cutting tools in multi-pass turning operations using genetic algorithms', International Journal of Production Research, Vol.40, pp.2053-2065. (Pubitemid 34699713)
37. Wang, X. and Jawahir, I.S. (2005) 'Optimization of multi-pass turning operations using genetic algorithms for the selection of cutting conditions and cutting tools with tool wear effect', International Journal of Production Research, Vol.43, pp.3543-3559.
38. Yang, W.H. and Tarng, Y.S. (1998) 'Design optimization of cutting parameters for turning operation based on the Taguchi method', Journal of Material Processing Technology, Vol.84, pp.122-129. (Pubitemid 128638952)
39. Yeo, S.H. (1995) 'A multipass optimization strategy for CNC lathe operations', International Journal of Production Economics, Vol.40, pp.209-218.
40. Zurada, J.M. (1997) Introduction to Artificial Neural Systems, Jaico Publishing House, Delhi.