Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction

Wear

Volumn 267, Issue 1-4, 2009, Pages 458-466

  Mondal, A K ^a   Kumar, S ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Abrasion; Dry sliding wear; Hybrid metal matrix composite; Magnesium alloy; Plastic deformation

Indexed keywords

DRY SLIDING; DRY SLIDING WEAR; EXPERIMENTAL CONDITIONS; FIBRE ORIENTATION; HIGHER LOADS; HYBRID COMPOSITES; HYBRID METAL MATRIX COMPOSITE; LOAD RANGE; LOAD-BEARING CAPACITY; LONGITUDINAL DIRECTION; MICROSTRUCTURAL INVESTIGATION; PARTIAL REPLACEMENT; PIN ON DISC; REINFORCED COMPOSITES; SEVERE PLASTIC DEFORMATIONS; SHORT FIBRE; SIC PARTICLES; SLIDING DISTANCES; SLIDING VELOCITIES; SURFACE LAYERS; TRANSFER LAYERS; WEAR DEBRIS; WEAR MECHANISMS; WEAR RATES; WEAR TEST;

ABRASION; ALLOYS; CREEP; DEBRIS; FIBERS; IRON; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM PRINTING PLATES; PLASTIC DEFORMATION; PLASTICS; POLYMER MATRIX COMPOSITES; SILICON CARBIDE; TRIBOLOGY; WEAR RESISTANCE;

METALLIC MATRIX COMPOSITES;

EID: 65749116844     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2008.12.036     Document Type: Article

References (46)

1. Landkof B. Magnesium alloys applications. In: Aghion E., and Eliezer D. (Eds). Magnesium Alloys Science, Technology and Applications (2004), The Israeli Consortium for the Development of Magnesium Technology, Haifa 293-316
2. Mordike B.L., Kainer K.U., Moll F., and Sommer B. Creep behaviour of magnesium matrix composites. Proceedings of the First Israeli International Conference on Magnesium Science and Technology. Dead Sea, Israel (1997) 178-184
3. Moll F., Kainer K.U., and Mordike B.L. Thermal stability and creep behaviour of particle reinforced magnesium matrix composites. Proceedings of the Conference on Magnesium Alloys and Their Applications. Frankfurt, Germany (1998) 647-652
4. 3/C hybrid metal matrix composites. Compos. Struct. 39 (1997) 309-318
5. 3 and carbon fibres reinforced Al-12Si alloy hybrid composites. Wear 257 (2004) 930-940
6. Basavarajappa S., Chandramohan G., Mahadevan A., Thangavelu M., Subramanian R., and Gopalakrishnan P. Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite. Wear 262 (2007) 1007-1012
7. 3 fibers and SiC whiskers. Trans. JIM 29 (1988) 920-927
8. Zongyi M., Jing B., Yuxiong L., Hongwei S., and Yinxuan G. Abrasive wear of discontinuous SiC reinforced aluminum alloy composites. Wear 148 (1991) 287-293
9. Gurcan A.B., and Baker T.N. Wear behaviour of AA6061 aluminium alloy and its composites. Wear 188 (1995) 185-191
10. Park H.C. Wear behavior of hybrid metal matrix composite materials. Scr. Metall. Mater. 27 (1992) 465-470
11. 3/Al and Saffil/SiC/Al hybrid metal matrix composites. Wear 256 (2004) 705-713
12. Schröder J., and Kainer K.U. Magnesium-base hybrid composites prepared by liquid infiltration. Mater. Sci. Eng. A 135 (1991) 33-36
13. Gu M., Wu Z., Jin Y., and Koçak M. Effects of reinforcements on the aging response of a ZK60-based hybrid composite. Mater. Sci. Eng. A 272 (1999) 257-263
14. 3 fibres. Sci. Eng. Compos. Mater. 9 (2000) 11-16
15. 2f)/Mg hybrid metal matrix composite. J. Alloys Compd. 385 (2004) 104-108
16. Kumar S., Dieringa H., and Kainer K.U. Effect of particulate content on the thermal cycling behaviour of the magnesium alloy based hybrid composites. Compos. A 36 (2005) 321-325
17. Kumar S.R., Panigrahi M.K., Thakur S.K., Kainer K.U., Chakraborty M., and Dhindaw B.K. Characterization of stress in reinforcements in magnesium based squeeze infiltrated cast hybrid composites. Mater. Sci. Eng. A 415 (2006) 207-212
18. Kumar S., Dieringa H., and Kainer K.U. Thermal cycling behaviour of the magnesium alloy based hybrid composites in the transverse direction. Mater. Sci. Eng. A 454-455 (2007) 367-370
19. Arunachaleswaran A., Pereira I.M., Dieringa H., Huang Y., Hort N., Dhindaw B.K., and Kainer K.U. Creep behavior of AE42 based hybrid composites. Mater. Sci. Eng. A 460-461 (2007) 268-276
20. Svoboda M., Pahutová M., Kuchařová K., Sklenička V., and Kainer K.U. Microstructure and creep behaviour of magnesium hybrid composites. Mater. Sci. Eng. A 462 (2007) 220-224
21. Mondal A.K., and Kumar S. Impression creep behaviour of magnesium alloy based hybrid composites in the longitudinal direction. Compos. Sci. Technol. 68 (2008) 3251-3258
22. In: Shackelford J.F., and Alexander W. (Eds). Materials Science and Engineering Handbook (2001), CRC Press LLC, Boca Raton
23. Wu S.Q., Wang H.Z., and Tjong S.C. Mechanical and wear behavior of an Al/Si alloy metal-matrix composite reinforced with aluminosilicate fiber. Compos. Sci. Technol. 56 (1996) 1261-1270
24. 3 short fiber reinforced Al-Si (LM 13) alloy metal matrix composites. Wear 215 (1998) 170-179
25. Chen H., and Alpas A.T. Wear of aluminium matrix composites reinforced with nickel-coated carbon fibres. Wear 192 (1996) 186-198
26. Riahi A.R., and Alpas A.T. Wear map for grey cast iron. Wear 255 (2003) 401-409
27. Mehta D.S., Masood S.H., and Song W.Q. Investigation of wear properties of magnesium and aluminum alloys for automotive applications. J. Mater. Proc. Technol. 155-156 (2004) 1526-1531
28. p/QE22 magnesium alloy matrix composites. Mater. Sci. Eng. A 435-436 (2006) 653-657
29. Chen T.J., Ma Y., Li B., Li Y.D., and Hao Y. Wear behavior of thixoformed AZ91D magnesium alloy: a comparison with permanent mould cast alloy. Mater. Sci. Eng. A 445-446 (2007) 477-485
30. Sun H.Q., Shi Y.N., Zhang M.-X., and Lu K. Surface alloying of an Mg alloy subjected to surface mechanical attrition treatment. Surf. Coat. Technol. 202 (2008) 3947-3953
31. Sun H.Q., Shi Y.-N., and Zhang M.-X. Wear behaviour of AZ91D magnesium alloy with a nanocrystalline surface layer. Surf. Coat. Technol. 202 (2008) 2859-2864
32. An J., Li R.G., Lu Y., Chen C.M., Xu Y., Chen X., and Wang L.M. Dry sliding wear behavior of magnesium alloys. Wear 265 (2008) 97-104
33. El-Morsy A.-W. Dry sliding wear behavior of hot deformed magnesium AZ61 alloy as influenced by the sliding conditions. Mater. Sci. Eng. A 473 (2008) 330-335
34. Sahin Y. Wear behaviour of planar-random fibre-reinforced metal matrix composites. Wear 223 (1998) 173-183
35. Chen H., and Alpas A.T. Sliding wear map for the magnesium alloy Mg-9Al-0.9Zn (AZ91). Wear 246 (2000) 106-116
36. 3-Al composites produced by centrifugal force infiltration. Mater. Sci. Technol. 12 (1996) 483-488
37. p-reinforced magnesium matrix composites. Wear 255 (2003) 629-637
38. Alpas A.T., and Zhang J. Effect of microstructure (particulate size and volume fraction) and counter-face material on the sliding wear resistance of particulate-reinforced aluminum matrix composites. Metall. Mater. Trans. A 25 (1994) 969-983
39. Wilson S., and Alpas A.T. Wear mechanism maps for metal matrix composites. Wear 212 (1997) 41-49
40. Suh N.P. An overview of the delamination theory of wear. Wear 44 (1977) 1-16
41. p composites. Wear 157 (1992) 295-304
42. Hosking F.M., Portillo F.F., Wunderlin R., and Mehrabian R. Composites of aluminium alloys: fabrication and wear behaviour. J. Mater. Sci. 17 (1982) 477-498
43. 3 particulate-reinforced aluminum alloys. Mater. Sci. Eng. A 161 (1993) 273-284
44. Alpas A.T., and Zhang J. Wear rate transitions in cast aluminum-silicon alloys reinforced with SiC particles. Scr. Metall. Mater. 26 (1992) 505-509
45. Alpas A.T., and Zhang J. Effect of SiC particulate reinforcement on the dry sliding wear of aluminium-silicon alloys (A356). Wear 155 (1992) 83-104
46. 3-particulate-reinforced 6061 Al metal matrix composite. Wear 211 (1997) 192-197