Crystallographic textures and texture transitions induced by sliding wear in bronze and nickel

Wear

Volumn 267, Issue 1-4, 2009, Pages 485-494

  Cai, W ^a   Mabon, J ^a   Bellon, P ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

Bronze; Crystallographic texture; Friction; Nickel; Orientation mapping; Severe plastic deformation

Indexed keywords

CRYSTALLOGRAPHIC TEXTURE; CRYSTALLOGRAPHIC TEXTURES; DRY SLIDING; DRY SLIDING WEAR; FRICTION AND WEAR; METALLIC ALLOYS; NANO GRAINS; ORIENTATION IMAGING MICROSCOPY; ORIENTATION MAPPING; PIN-ON-DISK TESTS; POTENTIAL IMPACTS; RELATIVE INTENSITY; ROOM TEMPERATURE; SEVERE PLASTIC DEFORMATION; SHEAR TEXTURE COMPONENTS; SLIDING CONDITIONS; SLIDING WEAR; STEADY-STATE WEAR; SYMMETRY CONSTRAINTS; TEXTURE COMPONENTS; TEXTURE TRANSITION; WEAR TEST;

BRONZE; DISKS (STRUCTURAL COMPONENTS); FRICTION; NICKEL; NICKEL ALLOYS; PLASTIC DEFORMATION; TIN; TRIBOLOGY;

TEXTURES;

EID: 65749115632     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2008.11.016     Document Type: Article

References (37)

1. Rigney D.A., Chen L.H., Naylor M.G.S., and Rosenfield A.R. Wear processes in sliding systems. Wear 100 (1984) 195-219
2. Rainforth W.M., Stevens R., and Nutting J. Deformation structures induced by sliding contact. Philos. Mag. A 66 (1992) 621-641
3. Rigney D.A. Transfer, mixing and associated chemical and mechanical processes during the sliding of ductile materials. Wear 245 (2000) 1-9
4. Rainforth W.M. Microstructural evolution at the worn surface: a comparison of metals and ceramics. Wear 245 (2000) 162-177
5. Rainforth W.M., Leonard A.J., Perrin C., Bedolla-Jacuinde A., Wang Y., Jones H., and Luo Q. High-resolution observations of friction-induced oxide and its interaction with the worn surface. Tribol. Int. 35 (2002) 731-748
6. Johnson K.L. Contact Mechanics (1987), Cambridge University Press, Cambridge pp. 206-208
7. Heilmann P., Clark W.A.T., and Rigney D.A. Orientation determination of subsurface cells generated by sliding. Acta Metal. 31 (1983) 1293-1305
8. Wheeler D.R., and Buckley D.H. Texturing in metals as a result of sliding. Wear 33 (1975) 65-74
9. Krause H., and Halim Demirci A. Texture changes in the running surfaces of face-centered cubic metals as the result of frictional stresses. Wear 61 (1980) 325-332
10. Kocks U.F., Tomé C.N., and Wenk H.-R. Texture and Anisotropy (1998), Cambridge University Press, Cambridge
11. Van Houtte P., and Aernoudt E. Considerations on the crystal and the strain symmetry in the calculation of deformation textures with the Taylor theory. Mat. Sci. Eng. 23 (1976) 11-22
12. Montheillet F., Cohen M., and Jonas J.J. Axial stresses and texture development during the torsion testing of Al, Cu, and α-Fe. Acta Metal. 32 (1984) 2077-2089
13. Darrieulat M., and Montheillet F. Extension of the Hill (1948) yield criterion to the case of prismatic monoclinic symmetry. Int. J. Mech. Sci. 38 (1996) 1273-1284
14. Canova G.R., Kocks U.F., and Jonas J.J. Theory of torsion texture development. Acta Metal. 32 (1984) 211-226
15. Tóth L.S., Gilormini P., and Jonas J.J. Effect of rate sensitivity on the stability of torsion textures. Acta Metal. 36 (1988) 3077-3091
16. Krause H., and Öcalan E. The effect of initial orientation on the formation of tribological textures and on the wear behaviour of the region in the proximity of surface layers under continuous sliding motion in tribological systems. Wear 108 (1986) 337-343
17. Li S. Orientation stability in equal channel angular extrusion. Part I. Face-centered cubic and body-centered cubic materials. Acta Mater. 56 (2008) 1018-1030
18. Ohmae N., Tsukizoe T., and Akiyama F. On the microscopic processes involved in metallic friction. Philos. Mag. A 40 (1979) 803-810
19. Rigney D.A., Naylor M.G.S., Divakar R., and Ives L.K. Low energy dislocation structures caused by sliding and by particle impact. Mater. Sci. Eng. 81 (1986) 409-425
20. Schwarzer R.A., and Sukkau J. Automated crystal orientation mapping (ACOM) with a computer-controlled TEM by interpreting transmission Kikuchi patterns. Mater. Sci. Forum 273-275 (1998) 215-222
21. R.A. Schwarzer, Deformation textures in fcc metals subjected to frictional and abrasive wear, Proc. 2nd Intern. Conf. on Texture and Anisotropy of Polycrystals (ITAP-2), Solid State Phenom., 105 (2005) 195-200.
22. Farhat Z.N. Contribution of crystallographic texturing to the sliding friction behaviour of fcc and hcp metals. Wear 250 (2001) 401-408
23. Prasad S.V., Michael J.R., and Christenson T.R. EBSD studies on wear-induced subsurface regions in LIGA nickel. Scripta Mater. 48 (2003) 255-260
24. Ohno Y., Kaneko Y., and Hashimoto S. ECC observations of nanostructures formed by sliding wear in copper. Mater. Sci. Forum 503-504 (2006) 727-732
25. Singh J.B., Cai W., and Bellon P. Dry sliding of Cu-15 wt%Ni-8 wt%Sn bronze: wear behaviour and microstructures. Wear 263 (2007) 830-841
26. Singh J.B., Wen J.-G., and Bellon P. Nanoscale characterization of the transfer layer formed during dry sliding of Cu-15 wt%Ni-8 wt%Sn bronze alloy. Acta Mater. 56 (2008) 3053-3064
27. Lim S.C., and Ashby M.F. Wear-mechanism maps. Acta Metal. 35 (1986) 1-24
28. Hughes D.A., Lebensohn R.A., Wenk H.R., and Kumar A. Stacking fault energy and microstructure effects on torsion texture evolution. Proc. R. Soc. Lond. 456 (2000) 921-953
29. Pal H., Pradhan S.K., and De M. Microstructure and phase-transformation studies of Cu-Ni-Sn alloys. Jpn. J. Appl. Phys. 34 (1995) 1619-1626
30. Beyerlein I.J., Tóth L.S., Tomé C.N., and Suwas S. Role of twinning on texture evolution of silver during equal channel angular extrusion". Philos. Mag. 87 (2007) 885-906
31. Arruffat-Massion R., Suwas S., Tóth L.S., Skrotzki W., Fundenberger J.J., and Eberhardt A. Experiments and modeling of ECAE textures of f.c.c. polycrystals. Mater. Sci. Forum 495-497 (2005) 839-844
32. Van Houtte P. Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning. Acta Metal. 26 (1978) 591-604
33. Bateni M.R., Szpunar J.A., Wang, and Li D.Y. The effect of wear and corrosion on internal crystalline texture of carbon steel and stainless steel. Wear 259 (2005) 400-404
34. Zhao J.-C., and Notis M.R. Spinodal decomposition, ordering transformation, and discontinuous precipitation in a Cu-15Ni-8Sn alloy. Acta Mater. 46 (1998) 4203-4218
35. Brizmer V., Kligerman Y., and Etsion I. Elastic-plastic spherical contact under combined normal and tangential loading in full stick. Tribo. Lett. 25 (2007) 61-70
36. Azzi M., Reza Bateni M., Szpunar J.A., Jedrzejowski P., and Klemberg-Sapieha J.E. The effect of texture on friction of AISI 3004 stainless steel. Mater. Sci. Forum 495-497 (2005) 1579-1584
37. S.V. Prasad, J.R. Michael, B.S. Majumdar, C.C. Battaile, N.R. Moody, M.J. Cordill, J.M. Jungk, D.J. Bammann, Modeling of friction-induced deformation and microstructures, Sandia Report SAND2006-7028, Sandia National Laboratories, 2006.