Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites

Wear

Volumn 267, Issue 5-8, 2009, Pages 1022-1030

  Rawat, Sanjay ^a   Attia, Helmi ^a,b  

^a MCGILL UNIVERSITY   (Canada)

^b NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

High speed drilling; WC tools; Wear mechanisms; Woven composites

Indexed keywords

CARBON FIBRE COMPOSITES; CIVIL APPLICATIONS; CUTTING EDGES; CUTTING FORCES; ECONOMICAL IMPACT; EPOXY COMPOSITE; EPOXY MATRICES; EXPERIMENTAL INVESTIGATIONS; FLANK FACE; FLANK WEAR; FRICTION REGIME; HIGH TEMPERATURE RISE; HIGH-SPEED DRILLING; NONLINEAR BEHAVIOR; OBJECTIVE FUNCTIONS; OPTIMIZATION SCHEME; PART QUALITY; REPLACEMENT STRATEGY; SPINDLE SPEED; SURFACE DAMAGES; SYSTEM COMPONENTS; TOOL LIFE; TOOL WEAR; WC TOOLS; WEAR MECHANISMS; WEAR PROCESS; WEAR REGIMES; WEAR STAGE; WOVEN COMPOSITES;

ABRASION; CARBON FIBERS; CARBON NANOFIBERS; COMPOSITE MATERIALS; DELAMINATION; DRILLING; DRILLS; EPOXY RESINS; FIBERS; GRAPHITE; GRAPHITE FIBERS; METAL ANALYSIS; REFRACTORY MATERIALS; SPEED; STEEL SHEET; SURFACE PROPERTIES; SURFACE ROUGHNESS; TRIBOLOGY; TUNGSTEN; WEAVING;

TUNGSTEN CARBIDE;

EID: 65649154750     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.01.031     Document Type: Article

References (41)

1. Jahanmir S., Ramulu M., and Koshy P. Machining of Ceramics and Composites (1999), Marcel Dekker
2. Komanduri R. Machining fibre-reinforced composites. Mechanical Engineering 115 4 (1994) 58-64
3. Schwartz M.M. Machining of composites. SAMPE Journal 32 2 (1996) 18-25
4. Koplev A.L., and Vorm T. The cutting process, chips and cutting forces in machining CFRP. Composites 14 4 (1983) 371-376
5. Teti R. Machining of composites materials. Annals of CIRP 51 (2002) 611-634
6. Tandon S., Jain V.K., Kumar P., and Rajukar K.P. Investigations into machining of composites. Precision Engineering 12 4 (1990) 227-237
7. Gordon S., and Hillery M.T. A review of the cutting of composite materials. Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials: Design and Application 217 (2003) 35-45
8. Ho-Cheng H., and Dharan C.K.H. Delamination during drilling in composite laminates. Transactions of ASME 112 (1990) 236-239
9. Shaw M.C. Metal Cutting Principles (1998), Oxford Press pp. 475-481
10. Jain S., and Yang D.C.H. Effect of feed rate and chisel edge on delamination in composite drilling. Transactions of ASME 115 (1993) 398-405
11. Malhotra S.K. Some studies on drilling of fibrous composites. Journal of Materials Processing Technology 24 (1990) 291-300
12. Lin S.C., and Chen I.K. Drilling carbon fiber-reinforced composite material at high speed. Wear 194 (1996) 156-162
13. Inoue H., Aoyama E., Hirogaski T., Ogawa K., Matushita H., Kitahara Y., and Katayama T. Influence of tool wear on internal damage in small diameter drilling in GFRP. Composite Structures 39 1 (1997) 55-62
14. Velayudham R., Krishnamurthy T., and Soundarapandian. Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite. International Journal of Machine Tools and Manufacture 45 (2005) 399-406
15. Kim D., and Ramulu M. Drilling process optimization for graphite/bismaleimide-titanium alloy stacks. Composite Structures 63 (2004) 101-114
16. Ramkumar J., Malhotra S.K., and Krishnamurthy R. Studies on drilling of glass/epoxy laminates using coated high speed steel drills. Materials and Manufacturing Processes 15 2 (2002) 213-222
17. Murphy C., Byrne G., and Gilchrist M.D. The performance of coated tungsten carbide drills when machining carbon fiber-reinforced epoxy composite materials. Proceedings of Institution of Mechanical Engineers 216 (2002) 143-152
18. Weinert K., and Kempmann C. Cutting temperatures and their effects on the machining behaviour in drilling reinforced plastic composites. Advanced Engineering Materials 6 8 (2004) 684-689
19. Wen-Chou Chen. Some experimental investigations in the drilling of Carbon Fibre-Reinforced Plastic (CFRP) composite laminates. International Journal of Machine Tools and Manufacture 37 8 (1997) 1097-1108
20. Yoda S., Takahashi R., Wakashima K., and Umekawa S. Fibre/matrix interface porosity formation in tungsten fibre/copper composites on thermal cycling. Metallurgical and Materials Transactions A 10 11 (1979) 1796-1798
21. Dharan C.K.H. Fracture mechanics of composite materials. ASME Journal of Engineering Materials and Technology 100 3 (1978) 233-247
22. Hocheng H., and Puw H.Y. On drilling characteristics of fibre-reinforced thermoset and thermoplastics. International Journal of Machine Tools and Manufacture 32 4 (1992) 583-592
23. Masuda M., Kuroshima Y., and Chujo Y. Failure of tungsten carbide-cobalt alloy tools in machining of carbon materials. Wear 169 (1993) 135-140
24. Larsen-Basse J., and Koyanagi E.T. Abrasion of WC-Co alloys by quartz. ASME Journal of Engineering Industry 101 (1979) 208-211
25. Larsen-Basse J. Abrasion mechanism-delamination to machining. Proc. of Int. Conf. on the Fundamentals of Tribology (1978), MIT Press, Cambridge pp. 679-689
26. Blombery R.I., Perrot C.M., and Robinson P.M. Abrasive wear of tungsten carbide-cobalt composites. Wear mechanisms. Material Science and Engineering 13 (1974) 93-100
27. Bardetsky A., Attia H., and Elbestawi M. A fracture mechanics approach to the prediction of tool wear in dry high-speed machining of aluminum cast alloys. Part 1: Model development. Transactions of the ASME, Journal of Tribology 129 1 (2007) 23-30
28. Bardetsky A., Attia H., and Elbestawi M. A Fracture mechanics approach to the prediction of tool wear in dry high-speed machining of aluminum cast alloys. Part 2: Model calibration and verification. Transactions of the ASME Journal of Tribology 129 1 (2007) 31-39
29. Jia K., and Fischer T.E. Sliding wear of conventional and nanostructured cemented carbides. Wear 203-204 (1997) 310-318
30. Velayudham A., Krishnamurthy R., and Soundarapandian T. Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite. International Journal of Machine Tools and Manufacture 45 (2005) 399-406
31. Costa A.K., and Camargo Jr. S.S. Properties of amorphous SiC coatings deposited on WC-Co substrates. Materials Research 6 1 (2002) 39-42
32. Engqvist H., and Wiklund U. Mapping of mechanical properties of WC-Co using nanoindentation. Tribology Letters 8 (2000) 147-152
33. Engqvist H., and Axén N. Abrasion of cemented carbides by small grits. Tribology International 32 (1999) 527-534
34. Engqvist H., Jacobson S., and Axén N. A model for the hardness of cemented carbides. Wear 252 (2002) 384-393
35. SFTC DEFORM 3D User's Manual V6.0, Scientific Technologies Corporation, OH, USA, 2006.
36. Dharan C.K.H., and Won M.S. Machining parameters for an intelligent machining system for composite laminates. International Journal of Machine Tools and Manufacture 40 (2000) 415-426
37. Zhang J.Z., and Chen J.C. Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system. International Journal of Advanced Manufacturing Technology 39 (2008) 118-128
38. Ramamurthi K., and Shaver D.P. Real time expert system for predictive diagnostics and control of drilling operation. Proc. 6th Conf. Artificial Intelligence Applications Santa Barbara (1990), IEEE Press, California, USA pp. 62-69
39. Dinakaran D., Sampathkumar S., and Krishnaraj S. On-line monitoring of flank wear in single point cutting tool using ultrasonic technique. Journal of Manufacturing Engineering 2 4. (2007)
40. Castejon M., Alegre E., Barreiro J., and Hernandez L.K. On-line tool wear monitoring using geometric descriptors from digital images. International Journal of Machine Tools Manufacture 47 12 (2007) 1847-1853
41. Antić A., Hodolič J., and Soković M. Development of an intelligent system for tool wear monitoring applying neural networks. Journal of Manufacturing Engineering of Achievements in Materials and Manufacturing Engineering 14 1-2 (2006) 146-151