A convenient approach for finite-element-analyses of orthopaedic implants in bone contact: Modeling and experimental validation

Computer Methods and Programs in Biomedicine

Volumn 95, Issue 1, 2009, Pages 23-30

  Kluess, Daniel ^a   Souffrant, Robert ^a   Mittelmeier, Wolfram ^a   Wree, Andreas ^a   Schmitz, Klaus Peter ^a   Bader, Rainer ^a  

^a UNIVERSITY OF ROSTOCK   (Germany)

Author keywords

Biomechanics; Bone; Finite element analysis; Implant; Orthopaedics

Indexed keywords

ACETABULAR CUPS; APPROPRIATE MODELS; BONE CONTACTS; BONE-IMPLANT INTERFACES; CORRELATION COEFFICIENTS; EXPERIMENTAL VALIDATIONS; FINITE-ELEMENT-ANALYSIS; GAIT CYCLES; IMPLANT; INTERFACE MECHANICS; MAXIMUM LOADS; MICROMOTION; MOTION TRACKING SYSTEMS; ORTHOPAEDIC IMPLANTS; ORTHOPAEDICS; PRINCIPAL STRAINS; STRONG CORRELATIONS;

BIOMECHANICS; BIOPHYSICS; BONE; DIAGNOSTIC RADIOGRAPHY; IMPLANTS (SURGICAL); INTERFACES (COMPUTER); ORTHOPEDICS; TOMOGRAPHY;

FINITE ELEMENT METHOD;

ARTICLE; BONE STRESS; COMPUTER AIDED DESIGN; COMPUTER ASSISTED TOMOGRAPHY; FINITE ELEMENT ANALYSIS; IMPLANT;

ALGORITHMS; BIOMECHANICS; BONE AND BONES; COMPUTATIONAL BIOLOGY; FINITE ELEMENT ANALYSIS; GAIT; HUMANS; MODELS, THEORETICAL; MOTION; ORTHOPEDIC FIXATION DEVICES; ORTHOPEDIC PROCEDURES; PELVIS; SOFTWARE; STRESS, MECHANICAL; TOMOGRAPHY, X-RAY COMPUTED;

EID: 64749100658     PISSN: 01692607     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cmpb.2009.01.004     Document Type: Article

References (25)

1. Anderson A.E., Peters C.L., Tuttle B.D., and Weiss J.A. Subject-specific finite element model of the pelvis: development, validation and sensitivity studies. J. Biomech. Eng. 127 3 (2005) 364-373
2. Bachtar F., Chen X., and Hisada T. Finite element contact analysis of the hip joint. Med. Biol. Eng. Comput. 44 8 (2006) 643-651
3. Dalstra M., Huiskes R., and van Erning L. Development and validation of a three-dimensional finite element model of the pelvic bone. J. Biomech. Eng. 117 3 (1995) 272-278
4. Dalstra M., and Huiskes R. Load transfer across the pelvic bone. J. Biomech. 28 6 (1995) 715-724
5. Dawson J.M., Khmelniker B.V., and McAndrew M.P. Analysis of the structural behavior of the pelvis during lateral impact using the finite element method. Accid. Anal. Prev. 31 1-2 (1999) 109-119
6. Garcia J.M., Doblare M., Seral B., Seral F., Palanca D., and Gracia L. Three-dimensional finite element analysis of several internal and external pelvis fixations. J. Biomech. Eng. 122 5 (2000) 516-522
7. Kaku N., Tsumura H., Taira H., Sawatari T., and Torisu T. Biomechanical study of load transfer of the pubic ramus due to pelvic inclination after hip joint surgery using a three-dimensional finite element model. J. Orthop. Sci. 9 3 (2004) 264-269
8. Kluess D., Martin H., Mittelmeier W., Schmitz K., and Bader R. Finite-element-analysis into impingement-related implant failure of total hip replacement. Mater. Test. 49 6 (2007) 330-336
9. Kluess D., Martin H., Mittelmeier W., Schmitz K.P., and Bader R. Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement. Med. Eng. Phys. 29 4 (2007) 465-471
10. Schultze C., Kluess D., Martin H., Hingst V., Mittelmeier W., Schmitz K.P., and Bader R. Finite element analysis of a cemented ceramic femoral component for the real assembly situation in total knee arthroplasty. Biomed. Tech. (Berl.) 52 4 (2007) 301-307
11. Spears I.R., Pfleiderer M., Schneider E., Hille E., and Morlock M.M. The effect of interfacial parameters on cup-bone relative micromotions. A finite element investigation. J. Biomech. 34 1 (2001) 113-120
12. Manley M.T., Ong K.L., and Kurtz S.M. The potential for bone loss in acetabular structures following THA. Clin. Orthop. Relat. Res. 453 (2006) 246-253
13. Oki H., Ando M., Omori H., Okumura Y., Negoro K., Uchida K., and Baba H. Relation between vertical orientation and stability of acetabular component in the dysplastic hip simulated by nonlinear three-dimensional finite element method. Artif. Organs 28 11 (2004) 1050-1054
14. Thompson M.S., Northmore-Ball M.D., and Tanner K.E. Effects of acetabular resurfacing component material and fixation on the strain distribution in the pelvis. Proc. Inst. Mech. Eng. [H] 216 4 (2002) 237-245
15. Rho J.Y., Hobatho M.C., and Ashman R.B. Relations of mechanical properties to density and CT numbers in human bone. Med. Eng. Phys. 17 5 (1995) 347-355
16. Snyder S.M., and Schneider E. Estimation of mechanical properties of cortical bone by computed tomography. J. Orthop. Res. 9 3 (1991) 422-431
17. ABAQUS, Version 6.7 Documentation, ABAQUS Analysis Manual, Simulia, Dassault Systèmes, RI, USA, 2007.
18. T. Zacharias, Präoperative biomechanische Berechnung von Femur-Hüftendoprothese-Systemen zur Ermittlung der individuellen Primärstabilität nach Roboterimplantation, Shaker Verlag, Aachen, 2001.
19. Dalstra M., Huiskes R., Odgaard A., and van Erning L. Mechanical and textural properties of pelvic trabecular bone. J. Biomech. 26 4-5 (1993) 523-535
20. Keller T.S. Predicting the compressive mechanical behavior of bone. J. Biomech. 27 9 (1994) 1159-1168
21. Bergmann G., Deuretzbacher G., Heller M., Graichen F., Rohlmann A., Strauss J., and Duda G.N. Hip contact forces and gait patterns from routine activities. J. Biomech. 34 7 (2001) 859-871
22. Bergmann G., Graichen F., and Rohlmann A. Hip joint loading during walking and running, measured in two patients. J. Biomech. 26 8 (1993) 969-990
23. D'Lima D.D., Patil S., Steklov N., Slamin J.E., and Colwell Jr. C.W. Tibial forces measured in vivo after total knee arthroplasty. J. Arthroplasty 21 2 (2006) 255-262
24. Rasmussen J., Damsgaard M., Surma E., Christensen S.T., and de Zee M. Designing a general software system for musculoskeletal analysis. IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia (2003)
25. G. Bergmann, www.orthoload.com.