Relation between vertical orientation and stability of acetabular component in the dysplastic hip simulated by nonlinear three-dimensional finite element method

Artificial Organs

Volumn 28, Issue 11, 2004, Pages 1050-1054

  Oki, Hisashi ^a   Ando, Masao ^a   Omori, Hironori ^a   Okumura, Yasuhiro ^a   Negoro, Kohei ^a   Uchida, Kenzo ^a   Baba, Hisatoshi ^a  

^a UNIVERSITY OF FUKUI   (Japan)

Author keywords

Acetabular component; Contact stress; Cup abduction angle; Relative motion; Shear stress

Indexed keywords

ARTHROPLASTY; BONE; FINITE ELEMENT METHOD; HIP PROSTHESES; METALS; POLYETHYLENES;

ABDUCTION ANGLE; ACETABULAR COMPONENTS; CONTACT STRESS; CUP ABDUCTION ANGLE; DYSPLASTIC HIPS; METAL SHELL; POLYETHYLENE WEAR; RELATIVE MOTION; THREE-DIMENSIONAL FINITE ELEMENT METHOD; TOTAL HIP ARTHROPLASTY;

SHEAR STRESS;

POLYETHYLENE; BIOMATERIAL; POLYETHYLENE DERIVATIVE;

ACETABULUM; ARTICLE; BONE STRENGTH; COMPARATIVE STUDY; COMPUTER SIMULATION; FINITE ELEMENT ANALYSIS; HIP DYSPLASIA; NONLINEAR SYSTEM; PRIORITY JOURNAL; PROSTHESIS LOOSENING; SHEAR STRENGTH; SHEAR STRESS; TILTING; TOTAL HIP PROSTHESIS; BIOLOGICAL MODEL; CONGENITAL HIP DISLOCATION; FEMALE; HIP ARTHROPLASTY; HIP PROSTHESIS; HUMAN; MECHANICAL STRESS; PROSTHESIS; RADIOGRAPHY; THREE DIMENSIONAL IMAGING;

ACETABULUM; ARTHROPLASTY, REPLACEMENT, HIP; COATED MATERIALS, BIOCOMPATIBLE; FEMALE; FINITE ELEMENT ANALYSIS; HIP DISLOCATION, CONGENITAL; HIP PROSTHESIS; HUMANS; IMAGING, THREE-DIMENSIONAL; MODELS, BIOLOGICAL; POLYETHYLENES; PROSTHESIS DESIGN; STRESS, MECHANICAL;

EID: 15044342783     PISSN: 0160564X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1525-1594.2004.00017.x     Document Type: Article

References (35)

1. Shinar AA, Harris WH. Bulk structural autogenous grafts and allografts for reconstruction of the acetabulum in total hip arthroplasty. Sixteen-year-average follow-up. J Bone Joint Surg Am 1997;79-A:159-68.
2. Mulroy RD Jr, Harris WH. Failure of acetabular autogenous grafts in total hip arthroplasty. Increasing incidence: a follow-up note. J Bone Joint Surg Am 1990;72-A:1536-40.
3. Wolfgang GL. Femoral head autografting with total hip arthroplasty for lateral acetabular dysplasia. A 12-year experience. Clin Orthop 1990;255:173-85.
4. Köster G, Willert HG, Köhler HP, Döpkens K. An oblong revision cup for large acetabular defects: design rationale and two- to seven-year follow-up. J Arthroplasty 1998;13:559-69.
5. Kennedy JG, Rogers WB, Soffe KE, Sullivan RJ, Griffen DG, Sheehan LJ. Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. J Arthroplasty 1998;13:530-4.
6. Dunn HK, Hess WE. Total hip reconstruction in chronically dislocated hips. J Bone Joint Surg Am 1976;58-A:838-45.
7. Kelley SS. High hip center in revision arthroplasty. J Arthroplasty 1994;9:503-10.
8. Pagnano W, Hanssen AD, Lewallen DG, Shaughnessy WJ. The effect of superior placement of the acetabular component on the rate of loosening after total hip arthroplasty. J Bone Joint Surg Am 1996;78-A:1004-14.
9. Russotti GM, Harris WH. Proximal placement of the acetabular component in total hip arthroplasty. A long-term follow-up study. J Bone Joint Surg Am 1991;73-A:587-92.
10. Knight JL, Fujii K, Atwater R, Grothaus L. Bone grafting for acetabular deficiency during primary and revision total hip arthroplasty. A radiographic and clinical analysis. J Arthroplasty 1993;8:371-82.
11. Bono JV, Sanford L, Toussaint JT. Severe polyethylene wear in total hip arthroplasty. Observations from retrieved AML PLUS hip implants with an ACS polyethylene liner [see comments]. J Arthroplasty 1994;9:119-25.
12. Devane PA, Horne JG, Martin K, Coldham G, Krause B. Three-dimensional polyethylene wear of a press-fit titanium prosthesis. Factors influencing generation of polyethylene debris. J Arthroplasty 1997;12:256-66.
13. Kurtz SM, Edidin AA, Bartel DL. The role of backside polishing, cup angle, and polyethylene thickness on the contact stresses in metal-backed acetabular components. J Biomech 1997;30:639-42.
14. Del Schutte H Jr, Lipman AJ, Bannar SM, Livermore JT, Ilstrup D, Morrey BF. Effects of acetabular abduction on cup wear rates in total hip arthroplasty. J Arthroplasty 1998;13:621-6.
15. Woolson ST, Murphy MG. Wear of the polyethylene of Harris-Galante acetabular components inserted without cement. J Bone Joint Surg Am 1995;77-A:1311-4.
16. Ito H, Matsuno T, Minami A, Aoki Y. Intermediate-term results after hybrid total hip arthroplasty for the treatment of dysplastic hips. J Bone Joint Surg Am 2003;85-A:1725-32.
17. Lu Z, McKellop H. Frictional heating of bearing materials tested in a hip joint wear simulator. Proc Inst Mech Eng [H] 1997;211:101-8.
18. Shirazi-Adl A, Dammak M, Paiement G. Experimental determination of friction characteristics at the trabecular bone/porous-coated metal interface in cementless implants. J Biomed Mater Res 1993;27:167-75.
19. Schüller HM, Dalstra M, Huiskes R, Marti RK. Total hip reconstruction in acetabular dysplasia. A finite element study. J Bone Joint Surg Br 1993;75-B:468-74.
20. Dalstra M, Huiskes R. Load transfer across the pelvic bone. J Biomech 1995;28:715-24.
21. Keaveny TM, Bartel DL. Effects of porous coating, with and without collar support, on early relative motion for a cementless hip prosthesis. J Biomech 1993;26:1355-68.
22. Harrigan TP, Harris WH. A finite element study of the effect of diametral interface gaps on the contact areas and pressures in uncemented cylindrical femoral total hip components. J Biomech 1991;24:87-91.
23. Cameron HU, Pilliar RM, MacNab I. The effect of movement on the bonding of porous metal to bone. J Biomed Mater Res 1973;7:301-11.
24. Cook SD, Thomas KA, Haddad RJ Jr. Histologic analysis of retrieved human porous-coated total joint components. Clin Orthop 1988;234:90-101.
25. Heck DA, Nakajima I, Kelly PJ, Chao EY. The effect of load alteration on the biological and biomechanical performance of a titanium fiber-metal segmental prosthesis. J Bone Joint Surg Am 1986;68-A:118-26.
26. Pilliar RM, Lee JM, Maniatopoulos C. Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clin Orthop 1986;208:108-13.
27. Soballe K, Hansen ES, B-Rasmussen H, Jorgensen PH, Bunger C. Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions. J Orthop Res 1992;10:285-99.
28. Engh CA, O'Connor D, Jasty M, McGovern TF, Bobyn JD, Harris WH. Quantification of implant micromotion, strain shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses. Clin Orthop 1992;285:13-29.
29. Verdonschot N, Huiskes R. Cement debonding process of total hip arthroplasty stems. Clin Orthop 1997;336:297-307.
30. Huiskes R, van Rietbergen B. Preclinical testing of total hip stems. The effects of coating placement. Clin Orthop 1995;319:64-76.
31. Harris WH. Osteolysis and particle disease in hip replacement. A review. Acta Orthop Scand 1994;65:113-23.
32. Howie DW, Vernon RB, Oakeshott R, Manthey B. A rat model of resorption of bone at the cement-bone interface in the presence of polyethylene wear particles. J Bone Joint Surg Am 1988;70-A:257-63.
33. Bartel DL, Burstein AH, Toda MD, Edwards DL. The effect of conformity and plastic thickness on contact stresses in metal-backed plastic implants. J Biomech Eng 1985;107:193-9.
34. Bartel DL, Bicknell VL, Wright TM. The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. J Bone Joint Surg Am 1986;68-A:1041-51.
35. Jin ZM, Dowson D, Fisher J. A parametric analysis of the contact stress in ultra-high molecular weight polyethylene acetabular cups. Med Eng Phys 1994;16:398-405.