Mechanical properties of ultrafine grained aluminum and ultra low carbon steel produced by ARB process

TMS Annual Meeting

Volumn , Issue , 2002, Pages 389-397

  Tsuji, N ^a   Ito, Y ^a,b   Koizumi, Y ^a   Minamino, Y ^a   Saito, Y ^a  

^a OSAKA UNIVERSITY   (Japan)

^b IHI CORPORATION   (Japan)

Author keywords

Ductility; Grain growth; Hall Petch relationship; In situ recrystallization; Intense straining; Plastic instability; Strength

Indexed keywords

CARBON STEEL; DUCTILITY; GRAIN GROWTH; GRAIN SIZE AND SHAPE; PLASTIC DEFORMATION; PLASTICITY; RECRYSTALLIZATION (METALLURGY); STRAIN RATE; THICKNESS MEASUREMENT;

HALL-PETCH RELATIONSHIP; IN SITU RECRYSTALLIZATION; INTENSE STRAINING; PLASTIC INSTABILITY; YIELD DROP PHENOMENA;

ALUMINUM ALLOYS;

EID: 6444245910     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1002/9781118804537.ch45     Document Type: Conference Paper

References (21)

1. L.L. Shaw, "Processing Nanostructured Materials: An Overview", J. of Metals, 52 (2001), pp.41-45.
2. L.L. Shaw, Nanocrystalline Ceramics," Nanostruct. Mater., 3 (1993) 43-53.
3. R.Z. Valiev, F. Chmelik, F. Bordeaux, G. Kapelski and B. Baudelet, "The Hall-Petch Relation in Submicro-Grained Al-1.5%Mg Alloy", Scripta Metall Mater., 27 (1992), pp.855-860.
4. M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon, "Microhardness Measurements and the Hall-Petch Relationship in an Al-Mg Alloy with Submicrometer Grain Size", Acta Mater., 44, (1996), pp.4619-4629.
5. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, "Novel Ultra-High Straining Process for Bulk Materials-Development of the Accumulative Roll-Bonding (ARB) Process-", Acta Mater., 47 (1999), pp.579-583.
6. N. Tsuji, Y. Saito, H. Utsunomiya and T. Sakai, "Ultra-Fine Grained Ferrous and Aluminum Alloys Produced by Accumulative Roll-Bonding", 'Ultra-Fine Grained Materials', edited by R.S. Mishra, S.L. Semiatin, C. Suryanarayana, N.N. Thadhani, and T.C. Lowe, TMS (2000), pp.207-218.
7. Y. Ito, N. Tsuji, Y. Saito, H. Utsunomiya and T. Sakai, "Change in Microstructure and Mechanical Properties of Ultrafine Grained Aluminum during Annealing", J. Jpn. Inst. Metals, 64 (2000), pp.429-437.
8. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai and R.G. Hong, "Ultra-Fine Grained Bulk Aluminum Produced by Accumulative Roll-Bonding (ARB) Process", Scripta Mater., 39 (1998), pp.1221-1227.
9. N. Tsuji, Y. Saito, H. Utsunomiya and S. Tanigawa, "Ultra-Fine Grained Bulk Steel Produced by Accumulative Roll-Bonding (ARB) Process", Scripta Mater., 40 (1999), pp.795-800.
10. N. Tsuji, K. Shiotsuki and Y. Saito, "Superplasticity of Ultra-Fine Grained Al-Mg Alloy Produced by Accumulative Roll-Bonding", Mater. Trans. JIM, 40 (1999), pp.765-771.
11. S.H. Lee, T. Sakai, Y. Saito, H. Utsunomiya and N. Tsuji, "Strengthening of Sheath-Rolled Aluminum Based MMC by ARB Process", Mater. Trans. JIM, 40 (1999), pp. 1422-1428.
12. N. Tsuji, R. Ueji and Y. Saito, "Ultrafine Grains in Ultra Low Carbon IF Steel Highly Strained by ARB", Materia Japan, 39 (2000), p.961.
13. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya and N. Tsuji, "Fabrication and Refinement of 6061(p)/6063 Aluminum Laminate by Accumulative Roll-Bonding (ARB) Process", Proc. of Int. Conf. on Aluminum Alloys (ICAA-7), edited by E.A. Starke, Jr., T.H. Sanders, Jr. and W.A. Cassada, Trans Tech Publications, Switzerland, (2000), pp. 1169-1174.
14. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya and N. Tsuji, "Grain Refinement and Strengthening of 6061 Aluminum Alloy by Accumulative Roll-Bonding Process", Proc. of the 2nd Int. Conf. on Light Materials for Transportation Systems (LiMAT 2001), in press.
15. K. Inoue, N. Tsuji and Y. Saito, "Ultra Grain Refinement of 36%Ni Steel by Accumulative Roll-Bonding (ARB) Process", Proc. of Int. Symp. on Ultrafine Grained Steels (ISUGS-2001), ISIJ, (2001), in press.
16. X. Huang, N. Tsuji, Y. Minamino and N. Hansen, "Ultra-fine microstructures in aluminum highly strained by accumulative roll-bonding (ARB)", Proc. of the 22nd RISØ Int. Symp. on Materials Science, RISØ National Laboratory, Denmark, (2001), in press.
17. N. Tsuji, R. Ueji, Y. Ito and Y. Saito, "In-situ Recrystallization of Ultra-fine Grains in Highly Strained Metallic Materials", Proc. of the 21st RISØ Int. Symp. on Materials Science, RISØ National Laboratory, Denmark, (2000), pp.607-616.
18. N. Hansen, "Polycrystalline Strengthening", Metall. Trans. A, 16A (1985), pp.2167-2190.
19. Y. Saito, N. Tsuji and Y. Ito, "Microstructure and Mechanical Properties of Fine Grained Aluminum Produced by ARB and Annealing Process", Proc. Of the 3rd Symp. On Super Metal, RIMCOF&JRCM, Tokyo, (2001), pp. 149-161.
20. N. Tsuji, R. Ueji, Y. Saito, Y. Koizumi and Y. Minamino, "A Novel Process to Obtain Nanostructured Low-Carbon Bulky Steel with High Strength", Proc. of the 22nd RISØ Int. Symp. on Materials Science, RISØ National Laboratory, Denmark, (2001), in press.
21. R. Ueji, N. Tsuji, Y. Minamino, Y. Koizumi and Y. Saito, "Mechanical Properties of Nanostructured Low-Carbon Steels Produced by Conventional Cold-Rolling and Annealing of Martensite Starting Microstructure", "Ultrafine Grained Materials II", TMS, (2002), this book.