Platinum-group-metal-based intermetallics as high-temperature structural materials

JOM

Volumn 56, Issue 9, 2004, Pages 34-39

  Yamabe Mitarai, Y ^a   Gu, Y ^a   Huang, C ^a   Volkl R ^a,b   Harada, H ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b UNIVERSITY OF BAYREUTH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP TESTING; CRYSTAL STRUCTURE; DENSITY (SPECIFIC GRAVITY); DUCTILITY; HIGH TEMPERATURE PROPERTIES; INTERMETALLICS; MELTING; PHASE COMPOSITION; PHASE DIAGRAMS; PLATINUM METAL ALLOYS; STRAIN; STRUCTURAL METALS;

CREEP RATE; FACE CENTERED CUBIC; HIGH TEMPERATURE STRUCTURAL MATERIALS; ISOTHERMAL SECTION; MELTING TEMPERATURE; PLATINUM GROUP METAL BASED INTERMETALLICS; TIME STRAIN CURVES;

PLATINUM METAL COMPOUNDS;

EID: 6444243872     PISSN: 10474838     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11837-004-0198-z     Document Type: Article

References (80)

1. C.T. Sims, N.S. Stoloff, and W.C. Hargel, Superalloys II (New York: John Wiley & Sons, 1987).
2. R. Fleischer, J. Mat. Sci., 22, (1987), pp. 2281-2288.
3. R.L. Fleishcer and R.J. Zabala, Met. Trans. A, 21A, 10 (1990), pp. 2709-2715.
4. R.L. Fleischer et al., Met. Trans. A, 21A, 12 (1990), pp. 3063-3074.
5. R.L. Fleischer, R.D. Field, and C.L. Briant, Met. Trans. A, 22A, 1, (1991), pp. 129-137.
6. T.B. Massalski, editor, Binary Alloy Phase Diagram, vol. 3 (Materials Park, OH: ASM, 1992).
7. J.H. Westbrock, Trans. Metall. Soc. AIME, 209 (1957), pp. 898-9O4.
8. D.M. Wee and T. Suzuki, Trans. JIM, 20 (1979), pp. 634-646.
9. Y. Yamabe-Mitarai et al., Phil. Mag. Lett., 79 (9) (1999), pp. 673-682.
10. Y. Yamabe-Mitarai, Y. Ro, and S. Nakazawa, Intermetallics, 9 (2001), pp. 423-429.
11. Y. Yamabe et al., Scripta Mater., 35 (1996), pp. 211-216.
12. Y. Yamabe-Mitarai et al., Metall. Mater. Trans. A, 29A (1998), pp. 537-549.
13. Y. Yamabe-Mitarai et al., Scripta Mater., 40 (1) (1999), pp. 109-115.
14. Y. Yamabe-Mitarai et al., Intermetallics, 7 (1999), pp. 49-58.
15. Y. Yamabe-Mitarai, S. Nakazawa, and H. Harada, Scripta Mater., 43 (2000), pp. 1059-1064.
16. Y. Yamabe-Mitarai, S. Nakazawa, and H. Harada, JSME Inter. Jour., A, 45 (1) (2002), pp. 2-7.
17. Y.F. Gu et al., Met. Mater. Trans. A, 30A (10) (1999), pp. 2629-2639.
18. Y.F. Gu, Y. Yamabe-Mitarai, and H. Harada, Iridium, ed. E.K. Ohriner et al. (Warrendale, PA: TMS, 2000), pp. 73-83.
19. Y.F. Gu et al., Scripta Mater., 46 (2002), pp. 137-142.
20. Y.F. Gu et al., JSME Inter. Jour., A, 45 (1) (2002), pp. 8-13.
21. Y. Yamabe-Mitarai and H. Harada, J. Alloys and Comp., 361 (2003), pp. 169-179.
22. Y. Yamabe-Mitarai, Y. Gu, and H. Harada, Metall. Mater. Trans. A, 34A (10) (2003), pp. 2207-2215.
23. Y. Yamabe-Mitarai et al., Defect and Diffusion Forum, vols. 188-190 (2001), pp. 171-184.
24. Y. Yamabe-Mitarai and H. Harada, J. Mater. Sci., 38 (2003), pp. 3955-3963.
25. Y.F. Gu et al., Metall. Mater. Trans. A, 34A (2003), pp. 2217-2221.
26. Y. Gu et al., Scripta Mater., 39 (6) (1998), pp. 723-728.
27. B.L. Mordike and C.A. Brookes, Platinum Metals Review, 4 (1960), pp. 94-99.
28. S.S. Hecker, D.L. Rohr, and D.F. Stein, Metall. Trans. A, 9A (1978), pp. 481-488.
29. C. Gandhi and M.F. Ashby, Acta Metall., 27 (1979), pp. 1565-1602.
30. P. Panfilov and A. Yermakov, Mechanisms and Mechanics of Fracture - Symposium in Honor of Prof. J.F. Knott, eds. W.O. Soboyejo, J.J. Lewandowski, and R.O. Ritchie (Warrendale, PA:TMS, 2002), pp. 229-334.
31. C.T. Liu, H. Inouye, and A.C. Schaffhauser, Metall. Trans. A, 12A (1981), pp. 993-1002.
32. A.N. Gubbi et al., Metall. Mater. Trans. A, 28 (1997), pp. 2049-2057.
33. X.H. Yu et al., Metall. Mater. Trans. A, 31A (2000), pp. 173-178.
34. X.H. Yu et al., Metall. Mater. Trans. A, 32A (2001), pp. 1347-1353.
35. C. Huang et al., Intermetalics, 10 (2002), pp. 839-902.
36. C. Huang et al., Mater. Lett., 57 (2003), pp. 3371-3376.
37. C. Huang et al., Intermetallics, 11 (2003), pp. 917-926.
38. C. Huang et al., Mater. Lett., 58 (2004), pp. 483-488.
39. S. Miura et al., Intermetallics, 8 (2000), pp. 785-791.
40. Y. Yamabe-Mitarai et al., Scripta Mater., 36 (4) (1997), pp. 393-398.
41. Y.F. Gu et al., Mater. Lett., 41 (1999), pp. 45-51.
42. Y.F. Gu et al., Metall. Mater. Trans. A, 33A(4) (2002), pp. 1281-1283.
43. D.M. Wee et al., Trans. JIM, 21 (1981), pp. 237-247.
44. D.M. Wee, D.P. Pope, and V. Vitek, Acta Metall., 32 (6) (1984), pp. 829-836.
45. B. Fisher et al., Platinum Metals Review, 43 (1) (1999), pp. 18-28.
46. R. Völkl et al., Glastech. Ber. Glass Sci. Technol., 74 (5) (2001), pp. 142-151.
47. 3, 2000), CP-58.
48. G.B. Fairbank et al., Intermetallics, 8 (2000), pp. 1091-1100.
49. P.J. Meschter and W.L. Worrell, Metall. Trans. A, 8A (1977), pp. 503-509.
50. E.G. Kendall, C. Hays, and R.E. Swift, Trans. Metall. Soc. AIME, 221 (1961), pp. 445-451.
51. P.J. Hill et al., Mater. Sci. Eng., A301 (2001), pp. 167-179.
52. P.J. Hill, L.A. Cornish, and M.J. Witcomb, Proc. Int. Symp. on High Temperature Corrosion and Protection, ed. T. Narita, T. Maruyama, and S. Taniguchi (Tokyo: Iron and Steel Institute of Japan, 2000), pp. 185-190.
53. Y. Oya, Y. Mishima, and T. Suzuki, Z Metallkde, 7 (1987), pp. 485-490.
54. T. Chattopadhyay and K. Schubert, J. Less-Common Met., 41 (1975), pp. 19-32.
55. P.J. Hill, Y. Yamabe-Mitarai, and I.M. Wolff, Scripta Mater., 44, (2001), pp. 43-48.
56. P.J. Hill et al., Structural Intermetallics 2001, ed. K.J. Hemker et al. (Warrendale, PA: TMS, 2002), pp. 527-533.
57. R. Völkl et al., submitted to Metall. Mater. Trans., A (May 2004).
58. P.J. Hill et al., Mater. Sci. Eng. A, 329A (2002), pp. 295-304.
59. H. Meininger and M. Ellner, J. Alloys Comp., 353 (2003), pp. 207-212.
60. T. Biggs et al., Plat. Metal Rev., 47 (2003), pp. 142-156.
61. R. Völkl, D. Freund, and B. Fischer, J. Test. Eval., 31 (1) (2003), pp. 35-43.
62. R. Suss et al., Mater. Sci. and Eng., A338 (2002), pp. 131-141.
63. L.A. Cornish, B. Fischer, and R. Völkl, MRS Bulletin, 9 (2003), pp. 632-638.
64. S. Vorberg et al., JOM, in this issue.
65. R.L. Fleischer, R.D. Field, and C.L. Briant, Metall. Trans. A, 22A (2) (1991), pp. 403-414.
66. R.L. Fleischer, Acta Metall. Mater., 41 (3) (1993), pp. 863-869.
67. R.L. Fleischer, Acta Metall. Mater., 41 (4) (1993), pp. 1197-1205.
68. R.L. Fleischer and D.W. Mckee, Metall. Trans. A, 24A (3)(1993), pp. 759-763.
69. I.M. Wolff and G. Sauthoff, Metall. Trans. A, 27A (5) (1996), pp. 1395-1400.
70. I.M. Wolff and G. Sauthoff, Metall. Trans. A, 27A (9) (1996), pp. 2642-2651.
71. I.M. Wolff, Metall. Trans. A, 27A (11) (1996), pp. 3688-3699.
72. I.M. Wolff and G. Sauthoff, Acta Mater., 45 (7) (1997), pp. 2949-2969.
73. P.J. Hill, L.A. Cornish, and M.J. Witcomb, J. Alloys and Comp., 291 (1-2) (1999), pp. 130-144.
74. J. Hohls, P.J. Hill, and I.M. Wolff, Mater. Sci. and Eng., A329-331 (2002), pp. 504-512.
75. H. Hosoda et al., Mater. Trans. JIM, 38 (10) (1997), pp. 871-878.
76. H. Hosoda, S. Miyazaki, and S. Hanada, Intermetallics, 8 (2000), pp. 1081-1090.
77. A. Chiba et al., Intermetallics, 6 (1998), pp. 35-42.
78. Y. Yamabe-Mitarai et al., Scripta Mater., 48 (2003), pp. 565-570.
79. Y. Yamabe-Mitarai and H. Aoki, J. Alloys and Comp., 359 (2003), pp. 143-152.
80. Y. Yamabe-Mitarai and H. Aoki, Mater. Sci. Eng., A362 (2003), pp. 152-159.