Development of platinum-group-metal superalloys for high-temperature use

MRS Bulletin

Volumn 28, Issue 9, 2003, Pages 632-638

  Cornish, Lesley A ^a   Fischer, Bernd ^b   Völkl, Rainer ^c  

^a MINTEK   (South Africa)

^b UNIVERSITY OF APPLIED SCIENCES JENA   (Germany)

^c UNIVERSITY OF BAYREUTH   (Germany)

Author keywords

Intermetallic alloys; Jet engines; Platinum; Polycrystals; Structure; Superalloys; Ultrahigh temperature materials

Indexed keywords

ADDITION REACTIONS; COMPRESSION TESTING; HIGH TEMPERATURE APPLICATIONS; NICKEL; OXIDATION; PLATINUM; PRECIPITATION (CHEMICAL); SCANNING ELECTRON MICROSCOPY; STRENGTHENING (METAL); TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY;

NICKEL BASED SUPERALLOYS; OXIDATION TEST; PLATINUM GROUP METAL SUPERALLOYS; ULTRAHIGH TEMPERATURE MATERIALS;

SUPERALLOYS;

EID: 0141461830     PISSN: 08837694     EISSN: None     Source Type: Journal    
DOI: 10.1557/mrs2003.190     Document Type: Article

References (43)

1. C.T. Sims, N.S. Stoloff, and W.C. Hagel, in Superalloys II: High Temperature Materials for Aerospace and Industrial Power (Wiley InterScience, New York, 1987) p. 615.
2. S. Takeuchi and E. Kuramoto, J. Phys. Soc. Jpn 31 (1971), p. 1282.
3. S. Takeuchi and E. Kuramoto, Acta Metall. 21 (1973) p. 415.
4. G.W. Goward, Sur. Coat. Technol. 108-109 (1998) p. 73.
5. C.L. Briant, in High-Temperature Silicides and Refractory Alloys, edited by C.L. Briant, J.J. Petrovic, B.P. Bewlay, A.K. Vasudevan, and H.A. Lipsitt (Mater. Res. Soc. Symp. Proc. 322, Pittsburgh, 1994) p. 305.
6. Y. Yamabe, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko, and H. Harada, Scripta Mater. 35 (1996) p. 211.
7. Y. Yamabe-Mitarai, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko, and H. Harada, Scripta Mater. 36 (1997) p. 393.
8. Y. Yamabe-Mitarai, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko, and H. Harada, in High-Temperature Ordered Intermetallic Alloys VII, edited by C.C. Koch, C.T. Liu, N.S. Stoloff, and A. Wanner (Mater. Res. Soc. Symp. Proc. 460, Warrendale, PA, 1997) p. 701.
9. Y. Yamabe-Mitarai, Y. Ro, T. Maruko, and H. Harada, in Structural Intermetallics 1997 (The Minerals, Metals and Materials Society, Warrendale, PA, 1997) p. 805.
10. Y. Yamabe-Mitarai, Y. Ro, T. Maruko, and H. Harada, Metall. Mater. Trans. A 29A (1998) p. 537.
11. Y. Yamabe-Mitarai, Y. Ro, T. Maruko, T. Yokokawa, and H. Harada, in Proc. 6th Liege Conf. on Materials for Advanced Power Engineering, EC 5, Part II, edited by J. Lecomte-Beckers, F. Schubert, and P.J. Ennis (Forschungszentrum Jülich Energy Technology, Jülich, Germany, 1998) p. 1147.
12. Y.F. Gu, Y. Yamabe-Mitarai, and H. Harada, in Iridium, edited by E.K. Ohriner, R.D. Lanam, P. Panfilov, and H. Harada (The Minerals, Metals and Materials Society, Warrendale, PA, 2000) p. 73.
13. Y.F. Gu, Y. Yamabe-Mitarai, Y. Ro, T. Yokokawa, and H. Harada, Metall. Mater. Trans. A 30A (1999) p. 2629.
14. Y.F. Gu, Y. Yamabe-Mitarai, X.H. Yu, and H. Harada, Mater. Lett. A 41 (1999) p. 45.
15. Y.F. Gu, Y. Yamabe-Mitarai, S. Nakazawa, Y. Ro, and H. Harada, Metall. Mater. Trans. A 33A (2002) p. 1281.
16. D. Lupton, Adv. Mater. 5 (1990) p. 29.
17. M.V. Whalen, Platinum Met. Rev. 32 (1) (1988) p. 2.
18. B. Fischer, A. Behrends, D. Freund, F. Lupton, and J. Merker, Platinum Met. Rev. 43 (1) (1999) p. 18.
19. J. Merker, F. Lupton, M. Töpfer, and H. Knake, Platinum Met. Rev. 45 (2) (2001) p. 74.
20. F.A. Thompson, Glass 7 (1990) p. 279.
21. Degussa AG, patent application DE 3 030 751 A1 (1980).
22. Johnson Matthey PLC, patent specification DE 3 102 342 C2 (1981).
23. Owens-Corning Fiberglass Corp., patent application WO 81/00977 (1979).
24. Schott Glaswerke, patent specification DE 4417 495 C1 (1994).
25. B. Fischer, D. Freund, J. Merker, R. Völkl, and D.F. Lupton, in Proc. 8th Int. Conf. on Composites Engineering, edited by D. Hui (University of New Orleans, New Orleans, LA, 2001) p. 249.
26. P.J. Hill, T. Biggs, P. Ellis, J. Hohls, S. Taylor, and I.M. Wolff, Mater. Sci. Eng., A A301 (2001) p. 167.
27. P.J. Hill, L.A. Cornish, and M.J. Witcomb, in Proc. Int. Symp. on High Temperature Corrosion and Protection, edited by T. Narita, T. Maruyama, and S. Taniguchi (Iron and Steel Institute of Japan, Tokyo, 2000) p. 185.
28. Y. Yamabe-Mitarai, M.H. Hong, Y. Ro, and H. Harada, Philos. Mag. Lett. 79 (9) (1999) p. 673.
29. P.J. Hill, L.A. Cornish, P. Ellis, and M.J. Witcomb, J. Alloys Compd. 322 (2001) p. 166.
30. T. Biggs, P.J. Hill, L.A. Cornish, and M.J. Witcomb, J. Phase Equilib. 22 (3) (2001) p. 214.
31. B. Fischer, A. Behrends, D. Freund, D. Lupton, and J. Merker, in Proc. Creep Behavior of Advanced Materials for the 21st Century, edited by R.S. Mishra, A.K. Mukherjee, and K.L. Murty (The Minerals, Metals and Materials Society, Warrendale, PA, 1999) p. 321.
32. R. Völkl, D. Freund, and B. Fischer, J. Test. Eval. 31 (1) (2003) p. 35.
33. R. Süss, D. Freund, R. Völkl, B. Fischer, P.J. Hill, P. Ellis, and I.M. Wolff, Mater. Sci. Eng., A A338 (2002) p. 133.
34. P.J. Hill, Y. Yamabe-Mitarai, H. Murakami, L.A. Cornish, M.J. Witcomb, I.M. Wolff, and H. Harada, in Structural Intermetallics 2001, edited by K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger (The Minerals, Metals and Materials Society, Warrendale, PA, 2002) p. 527.
35. J.-C. Zhao, J. Mater. Res. 16 (2001) p. 1565.
36. T. Biggs, L.A. Cornish, M.J. Witcomb, and M.B. Cortie, J. Phys. IV (France) 11 (2001) p. 493.
37. L.A. Cornish, J. Hohls, P.J. Hill, S. Prins, R. Süss, and D.N. Compton, in Proc. 34th Int. Conf. on Mining and Metallurgy, edited by Z.S. Markovic and D.T. Zivkovic (2002) p. 545.
38. G.B. Fairbank, C.J. Humpheys, A. Kelly, and C.N. Jones, Intermetallics 8 (2000) p. 1091.
39. G.B. Fairbank, C.J. Humpheys, and C.N. Jones, presented at 2nd Int. Symp. on High-Temperature Materials 2001 (Tsukuba, Japan, May 31-June 2, 2001).
40. R. Völkl, D. Freund, B. Fischer, and D. Gohlke, in Proc. 8th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, Key Engineering Materials, Vols. 171-174, edited by T. Sakuma and K. Yagi (Trans Tech Publications, Utilkon-Zürich, Switzerland, 2000) p. 77.
41. B. Fischer, D. Freund, and D. Lupton, in Proc. Int. TMS Symp. on Rhenium and Rhenium Alloys (The Minerals, Metals and Materials Society, Warrendale, PA, 1997) p. 311.
42. B. Fischer, D. Freund, T. Brömel, R. Völkl, J. Daniel, W. Ross, R. Teschner, and C.-E. Michelsen, in Proc. 25th Int. Precious Metals Conf. [CD-ROM] (International Precious Metals Institute, Pensacola, FL, 2002) p. 99.
43. B. Fischer, Adv. Eng. Mater. 3 (10) (2001) p. 811.