Preparation and properties of aramid/layered silicate nanocomposites by solution intercalation technique

Polymers for Advanced Technologies

Volumn 19, Issue 12, 2008, Pages 1720-1728

  Zulfiqar, Sonia ^a   Ahmad, Zahoor ^b   Sarvar, Muhammad Ilyas ^a  

^a QUAID I AZAM UNIVERSITY   (Pakistan)

^b KUWAIT UNIVERSITY   (Kuwait)

Author keywords

Aromatic polyamide; Mechanical properties; Nanocomposites; TEM; Thermal properties; Water uptake; XRD

Indexed keywords

AROMATIC POLYAMIDE; TEM; THERMAL PROPERTIES; WATER UPTAKE; XRD;

AMINES; AROMATIC COMPOUNDS; CHLORINE COMPOUNDS; COMPOSITE FILMS; DIFFERENTIAL SCANNING CALORIMETRY; GLASS TRANSITION; ION EXCHANGE; MECHANICAL PROPERTIES; MECHANICAL TESTING; METALLIC MATRIX COMPOSITES; NANOCOMPOSITES; ORGANOCLAY; POLYMERS; PYROLYSIS; SILICATE MINERALS; STOICHIOMETRY; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; VULCANIZATION AGENTS; WATER ABSORPTION; X RAY DIFFRACTION ANALYSIS;

CLAY MINERALS;

FILM; MECHANICAL PROPERTY; NANOCOMPOSITE; SYNTHESIS; SYNTHETIC POLYAMIDE; THERMAL PROPERTY;

EID: 64149099577     PISSN: 10427147     EISSN: 10991581     Source Type: Journal    
DOI: 10.1002/pat.1186     Document Type: Article

References (40)

1. Olephen HV. An Introduction to Clay Colloidal Chemistry. Wiley: New York, 1977.
2. Greenberg AR, Kamel I. Kinetics of anhydride formation in poly(acrylic acid) and its effect on the properties of a PAA-alumina composite. J. Polym. Sci. Polym. Chem. Eds. 1977; 15(9): 2137-2149.
3. Giannelis EP, Krishnamoorti R, Manias E. Polymer-silicate nanocomposites: model systems for confined polymers and polymer brushes. Adv. Polym. Sci. 1999; 138: 107-147.
4. Alexandre M, Dubois P. Polymer-layered silicate nanocomposites: preparation and properties and uses of a new class of materials. Mater. Sci. Eng. R. 2000; 28(1-2): 1-63.
5. Biswas M, Ray SS. Recent progress in synthesis and evaluation of polymer-montmorillonite nanocomposites. Adv. Polym. Sci. 2001; 155: 167-221.
6. Okada A, Kawasumi M, Usuki A, Kojimi Y, Kurauchi T, Kamigato O. Synthesis and properties of nylon-6/clay hybrids. In: Schaefer DW, Mark JE (eds). Mater. Res. Symp. Proc. Pittsburgh, vol. 171 1990; p. 45-50.
7. McNally T, Murphy WR, Lew CY, Turner RT, Brennan GP. Polyamide-12 layered silicate nanocomposites by melt blending. Polymer 2003; 44(9): 2761-2772.
8. Shen L, Phang IY, Chen L, Liu T, Zeng K. Nanoindentation and morphological studies on nylon 66 nanocomposites. I. Effect of clay loading. Polymer 2004; 45(10): 3341-3349.
9. Gain O, Espuche E, Pollet E, Alexandre M, Dubois P. Gas barrier properties of poly(e-caprolactone)/clay nanocomposites: influence of the morphology and polymer/clay interactions. J. Polym. Sci. Part B: Polym. Phys. 2005; 43(2): 205-214.
10. Gonzalez I, Eguiazabal JI, Nazabal J. Exfoliated PA6,6 nanocomposites by modification withPA6. Polymer 2005; 46(8): 2978-2985.
11. Lopez DG, Mitre IG, Fernandez JF, Merino JC, Pastor JM. Influence of clay modification process in PA6-layered silicate nanocomposite properties. Polymer 2005; 46(8): 2758-2765.
12. Theng BKG. The Chemistry of Clay-Organic Reactions. Wiley: New York, 1974.
13. Theng BKG. Formation and Properties of Clay Polymer Complexes. Elsevier: New York, 1979.
14. Fredrickson GH, Bicerano J. Barrier properties of oriented disk composites. J. Chem. Phys. 1999; 110(4): 2181-2188.
15. Nah CW, Ryu HJ, Kim WD, Choi SS. Barrier property of clay/ acrylonitrile-butadiene copolymer nanocomposite. Polym. Adv. Technol. 2002; 13(9): 649-652.
16. Lee DC, Jang LW. Preparation and characertization of PMMA-clay composite by emulsion polymerization. J. Appl. Polym. Sci. 1996; 61(7): 1117-1122.
17. Okamoto M, Morita S, Taguchi H, Kim Y, Kotaka T, Tateyama H. Synthesis and structure of smectic clay/poly (methyl methacrylate) and clay/ polystyrene nanocomposites via in situ intercalative polymerization. Polymer 2000; 41(10): 3887-3890.
18. Sikka M, Cerini LN, Ghosh SS, Winey KI. Melt intercalation of polystyrene in layered silicates. J. Polym. Sci. Part B: Polym. Phys. 1996; 34(8): 1443-1449.
19. Chen Z, Huang C, Liu S, Zhang Y, Gong K. Characterization and properties of clay-polyacrylate hybrid materials. J. Appl. Polym. Sci. 2000; 75(6): 796-801.
20. Kato M, Usuki A, Okada A. Synthesis of polypropylene oligomer-clay intercalation compounds. J. Appl. Polym. Sci. 1997; 66(9): 1781-1785.
21. Gilman JW, Jackson CL, Morgan AB, Harris R Jr, Manias E, Giannelis EP, Wuthenow M, Hilton D, Philips SH. Flammability properties of polymer-layered silicate nanocomposites. Propylene and polystyrene nanocomposites. Chem. Mater. 2000; 12(7): 1866-1873.
22. Ke Y, Long C, Qi Z. Crystallization, properties, and crystal and nanoscale morphology of PET-clay nanocomposites. J. Appl. Polym. Sci. 1999; 71(7): 1139-1146.
23. Huang X, Lewis S, Brittain WJ, Vaia RA. Synthesis of polycarbonate-layered silicate nanocomposites via cyclic oligomers. Macromolecules 2000; 33(6): 2000-2004.
24. Huang JC, Zhu ZK, Yin J, Qian XF, Sun YY. Poly(etherimide)/ montmorillonite nanocomposites prepared by melt intercalation: morphology, solvent resistance properties and thermal properties. Polymer 2001; 42(3): 873-877.
25. Zilg C, Mulhaupt R, Finter J. Morphology and toughness/stiffness balance of nanocomposites based upon anhydridecured epoxy resins and layered silicates. Macromol. Chem. Phys. 1999; 200(3): 661-670.
26. Ke Y, Lu J, Yi X, Zhao J, Qi Z. The effects of promoter and curing process on exfoliation behaviour of epoxy/clay nanocomposites. J. Appl. Polym. Sci. 2000; 78(4): 808-815.
27. Sur GS, Sun HL, Lyu SG, Mark JE. Synthesis, structure, mechanical properties, and thermal stability of some polysulfone/organoclay nanocomposites. Polymer 2001; 42(24): 9783-9789.
28. Hu Y, Song L, Xu J, Yang L, Chem Z, Fan W. Synthesis of polyurethane/ clay intercalated nanocomposites. Colloid Polym. Sci. 2001; 279(8): 819-822.
29. Agag T, Koga T, Takeichi T. Studies on thermal and mechanical properties of polyimide-clay nanocomposites. Polymer 2001; 42(8): 3399-3408.
30. Tyan HL, Liu YC, Wei KH. Thermally and mechanically enhanced clay/ polyimide nanocomposites via reactive organoclay. Chem. Mater. 1999; 11(7): 1942-1947.
31. Tyan HL, Wei KH, Hsieh TE. Mechanical properties of clay-polyimide (BTDA-ODA) nanocomposites via ODA-modified organoclay. J. Polym. Sci. Part B: Polym. Phys. 2000; 38(22): 2873-2878.
32. Zulfiqar S, Ahmad Z, Ishaq M, Saeed S, Sarwar MI. Thermal and mechanical properties of SEBS-g-MA based inorganic composite materials. J. Mater. Sci. 2007; 42(1): 93-100.
33. Kausar A, Zulfiqar S, Shabbir S, Ishaq M, Sarwar MI. Mechanical properties of functionalized SEBS based inorganic hybrid materials. Polym. Bull. 2007; 59(4): 457-468.
34. Bibi N, Sarwar MI, Ishaq M, Ahmad Z. Mechanical and thermal properties of nanocomposites of poly(vinyl chloride) and co-poly(vinyl chloride-vinyl alcohol-vinyl acetate) with montmorillonite. Polym. Polym. Compos. 2007; 15(4): 313-319.
35. Zulfiqar S, Ahmad Z, Sarwar MI. Soluble aromatic polyamide bearing ether linkages: synthesis and characterization. Colloid Polym. Sci. 2007; 285(15): 1749-1754.
36. Zulfiqar S, Lieberwirth I, Sarwar MI. Soluble aramid containing ether linkages: synthesis, static and dynamic light scattering studies. Chem. Phys. 2008; 344(1-2): 202-208.
37. Ahmad Z, Sarwar MI, Wang S, Mark JE. Preparation and properties of hybrid organic-inorganic composites prepared from poly(phenylene terephthalamide) and titania. Polymer 1997; 38(17): 4523-4529.
38. Sarwar MI, Zulfiqar S, Ahmad Z. Organic-inorganic nanocomposites prepared from fluoro-aramid and silica. Colloid Polym. Sci. 2007; 285(15): 1733-1739.
39. Mark JE, Wang S, Ahmad Z. Inorganic-organic composites, including some examples involving polyamides and polyimides. Macromol. Symp. 1995; 98: 731-751.
40. Premachandra J, Kumudinie C, Zhao W, Mark JE, Dang TD, Chen JP, Arnold FE. Polymer-silica hybrid materials prepared from some functionalized polybenoxazoles and polybenzobisthiazoles. J. Sol Gel Sci. Technol. 1996; 7(3): 163-175.