An interactive micro-void shear localization mechanism in high strength steels

Journal of the Mechanics and Physics of Solids

Volumn 55, Issue 2, 2007, Pages 225-244

  McVeigh, Cahal ^a   Vernerey, Franck ^a   Liu, Wing Kam ^a   Moran, Brian ^a   Olson, Gregory ^a  

^a Northwestern University   (United States)

Author keywords

Constitutive behaviour; Ductility; Finite elements; Microstructures; Voids and inclusions

Indexed keywords

COALESCENCE; DUCTILITY; EMBEDDED SYSTEMS; FINITE ELEMENT METHOD; MICROSTRUCTURE; NUCLEATION; SHEAR DEFORMATION; STEEL;

COMPUTATIONAL CELL MODELING; HIGH STRENGTH STEELS (HSS); SHEAR INSTABILITY; SHEAR LOCALIZATION;

FAILURE ANALYSIS;

EID: 33845201975     PISSN: 00225096     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmps.2006.08.002     Document Type: Article

References (36)

1. Arsenlis A., and Parks D.M. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density. Acta Mater. 47 5 (1999) 1597-1611
2. Bandstra J.P., Koss D.A., 2001. Modeling the ductile fracture process of void coalescence by void-sheet formation. In: Materials Science and Engineering A 12th International Conference on the Strength of Materials ICSMA-12, pp. 490-495.
3. Bandstra J.P., Goto D.M., and Koss D.A. Ductile failure as a result of a void-sheet instability: experiment and computational modeling. Mater. Sci. Eng. A: Struct. Mater. Properties Microstruct. Process. A 249 1, 2 (1998) 46-54
4. Belytschko T., Liu W.K., and Moran B. Nonlinear Finite Elements for Continua and Structures (2000), Wiley, New York. 0-471-98773-5, 0-471-98774-3 (Pbk) 600pp
5. Beremin F.M. Cavity formation from inclusions in ductile fracture of A508 steel. Metall. Trans. 12A (1981) 723-731
6. Cowie J.G., Azrin M., and Olson G.B. Microvoid formation during shear deformation of ultrahigh strength steels. Metall. Trans. A (Phys. Metall. Mater. Sci.) 20A 1 (1989) 143-153
7. Dierickx P., Verdu C., Reynaud A., and Fougeres R. A study of physico-chemical mechanisms responsible for damage of heat treated and as-cast ferritic spheroidal graphite cast irons. Scripta Metall. 34 (1996) 261-268
8. Fleck N.A., and Hutchinson J.W. Strain gradient plasticity. Adv. Appl. Mech. 33 (1997) 296-358
9. Gall K., Yang N., Horstemeyer M.F., McDowell D.L., and Fan J. Debonding and fracture of Si particles during the fatigue of a cast Al-Si alloy. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 30A 12 (1999) 3079-3088
10. Goto D.M., Koss D.A., and Jablokov V. Influence of tensile stress states on the failure of HY-100 steel. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 30A 11 (1999) 2835-2842
11. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth and flow rules for porous ductile media. J. Eng. Mater. Technol. 99 1 (1977) 2-15
12. Hao S., Moran B., Liu W.K., and Olson G.B. A hierarchical multi-physics model for design of high toughness steels. J. Comput.-Aided Mater. Des. 10 2 (2003) 99-142
13. Hao S., Liu W.K., Moran, Vernerey F., and Olson G.B. Multi-scale constitutive model and computational framework for the design of ultra-high strength, high toughness steels. Comput. Methods Appl. Mech. Eng. 193 17-20 (2004) 1865-1908
14. Hayzelden C. Modeling of Interactions in void nucleation and growth. Sagamore Army Mater. Res. Conf. Proc. Innovations Ultrahigh-Strength Steel Technol. 34 (1987) 383-424
15. Hom C.L., and McMeeking R.M. J. Mech. Phys. Solids 37 3 (1989) 395-415
16. Horstemeyer M.F., and Gokhale A.M. Void-crack nucleation model for ductile metals. Int. J. Solids Struct. 36 33 (1999) 5029-5055
17. Horstemeyer M.F., Matalanis M.M., Sieber A.M., and Botos M.L. Micromechanical finite element calculations of temperature and void configuration effects on void growth and coalescence. Int. J. Plast. 16 7, 8 (2000) 979-1015
18. Horstemeyer M.F., Ramaswamy S., and Negrete M. Using a micromechanical finite element parametric study to motivate a phenomenological macroscale model for void/crack nucleation in aluminum with a hard second phase. Mech. Mater. 35 7 (2003) 675-687
19. Humphreys F.J. In-situ SEM studies of the fracture of aluminium particulate composites. Proceedings of EMAG MICRO 89 (1989), IOP Publishing Ltd., London 465-468
20. Hutchinson J.W., and Tvergaard V. Modeling of interactions in void nucleation and growth. Sagamore Army Mater. Res. Conf. Proc.: Innovations Ultrahigh-Strength Steel Technol. 34 (1987) 347-356
21. Kouznetsova V., Geers M.G.D., and Brekelmans W.A.M. Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme. Int. J. Num. Methods Eng. 54 8 (2002) 1235-1260
22. Lee B.J., and Mear M.E. Axisymmetric deformation of power law solids containing a dilute concentration of aligned spheroidal voids. J. Mech. Phys. Solids 40 8 (1992) 1805-1836
23. Lee J.H., Shishidou T., Zhao Y.J., Freeman A.J., and Olson G.B. Strong interface adhesion in Fe/TiC. Philos. Mag. 85 31 (2005) 3683-3697
24. Liu W.K., Jun S., and Zhang Y.F. Reproducing kernel particle methods. Int. J. Numer. Methods Fluids 20 (1995) 1081-1106
25. Liu W.K., Jun S., Li S.F., Adee J., and Belytschko T. Reproducing kernel particle methods for structural dynamics. Int. J. Numer. Methods Eng. 38 (1995) 1655-1679
26. Liu W.K., Li S.F., and Belytschko T. Moving least-square reproducing kernel methods. 1. Methodology and convergence. Comput. Methods Appl. Mech. Eng 143 (1997) 113-154
27. Manoharan M., and Lewandowski J.J. In situ deformation studies of an aluminium metal-matrix composite in a scanning electron microscope. Scripta Metall. 23 (1989) 1801-1804
28. 3 composites at cryogenic and elevated temperatures. Mater. Sci. Eng. 206A 2 (1996) 183-193
29. Rice J.R., and Tracey D.M. On the enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17 3 (1969) 201-217
30. Sarkar J., Kutty T.R.G., Konlon K.T., Wilkinson D.S., Embury J.D., and Lloyd D.J. Tensile and bending properties of aa5754 aluminum alloys. Mater. Sci. Eng. A 316 (2001) 52-59
31. Shabrov M.N., Sylven E., Kim S., Sherman D.H., Chuzhoy L., Briant C.L., and Needleman A. Void nucleation by inclusion cracking. Met. Mater. Trans. A 35 A (2004) 1745-1755
32. Tracey D.M., and Perrone P.J. Modeling of interactions in void nucleation and growth. Sagamore Army Mater. Res. Conf. Proc. Innovations Ultrahigh-Strength Steel Technol. 34 (1987) 315-330
33. Tvergaard V. Numerical study of localization in a void-sheet. Int. J. Solids Struct. 25 10 (1989) 1143-1156
34. Tvergaard V. Numerical analysis of 3D localization failure by a void-sheet mechanism. Eng. Fract. Mech. 41 6 (1992) 787-803
35. Tvergaard V., and Needleman A. Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32 1 (1984) 157-169
36. Verhaege B., Louchet F., Brechet Y., and Massoud J.P. Damage and rupture mechanisms in an austenoferritic duplex steel. Acta Mater. 45 (1997) 1811-1819