Improving the corrosion wear resistance of AISI 316L stainless steel by particulate reinforced Ni matrix composite alloying layer

Journal of Physics D: Applied Physics

Volumn 42, Issue 1, 2009, Pages

  Xu, Jiang ^a   Zhuo, Chengzhi ^a   Tao, Jie ^a   Jiang, Shuyun ^b   Liu, Linlin ^a  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

^b SOUTHEAST UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

316L SS; ACIDIC SOLUTIONS; AGGRESSIVE MEDIUMS; AISI 316; ALLOYING LAYERS; AMORPHOUS STRUCTURES; BRUSH PLATINGS; CARBIDES AND SILICIDES; COMPOSITE ALLOYING LAYERS; CORROSION WEARS; CORROSION-WEAR RESISTANCES; DOUBLE GLOWS; DUPLEX TREATMENTS; ELECTRO-CHEMICAL IMPEDANCES; MATRIX COMPOSITES; MATRIXES; NANO PARTICLES; NANO- SIO; NANO-SIC; POTENTIODYNAMIC POLARIZATION TESTS; PRECIPITATED PHASE; SEM AND TEM; SIC PARTICLES; SLURRY FLOWS; SURFACE ALLOYING; TEST CONDITIONS;

BRUSHES; CHEMICAL ATTACK; CHROMIUM; CORROSION RESISTANCE; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; METALLIC MATRIX COMPOSITES; MOLYBDENUM; NICKEL; PLATING; SILICIDES; SILICON CARBIDE; STAINLESS STEEL; STEEL METALLURGY; WEAR RESISTANCE;

ALLOYING;

EID: 63749123215     PISSN: 00223727     EISSN: 13616463     Source Type: Journal    
DOI: 10.1088/0022-3727/42/1/015410     Document Type: Article

References (41)

1. De Las Heras E, Egidi D A, Corengia P, Gonzlez-Santamaría D, García-Luis A, Brizuela M, López G A and Flores Martinez M 2008 Duplex surface treatment of an AISI 316L stainless steel; microstructure and tribological behaviour Surf. Coat. Technol. 202 2945-54
2. Dong H, Qi P Y, Li X Y and Llewellyn R J 2006 Improving the erosion-corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and C Mater. Sci. Eng. A 431 137-45
3. Zhang T C and Li D Y 2000 An experiment study on the erosion behavior of pseudoelastic TiNi alloy in dry sand and in aggressive media Mater. Sci. Eng. A 293 208-14
4. Tao S and Li D Y 2007 Investigation of corrosion-wear synergistic attack on nanocrystalline Cu deposits Wear 263 363-70
5. Bello J O, Wood R J K and Wharton J A 2007 Synergistic effects of micro-abrasion-corrosion of UNS S30403, S31603 and S32760 stainless steels Wear 263 149-59
6. Zhou S, Stack M M and Newman R C 1996 Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical technique Corrosion 52 934-46
7. Reyes M and Neville A 2003 Degradation mechanisms of Co-based alloy and WC metal-matrix composites for drilling tools offshore Wear 255 1143-56
8. Wang X Y and Li D Y 2001 Investigation of the synergism of wear and corrosion using an electrochemical scratch technique Tribol. Lett. 11 117-20
9. Hussain K, Tauqir A, ul Haq A and Khan A Q 1999 Influence of gas nitriding on fatigue resistance of maraging steel Int. J. Fatigue 21 163-8
10. Sule Y S, Kahraman S and Erdinc K 2008 Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340 steel Mater. Charact. 59 351-8
11. Misaelides P, Noli F, Riviere J P and Delafond J 1997 Surface characterisation and corrosion behaviour of SiC-coated AISI 321 stainless steel Nucl. Instrum. Methods B 129 221-7
12. Neville A, Reza F, Chiovelli S and Revega T 2005 Erosion-corrosion behaviour of WC-based MMCs in liquid-solid slurries Wear 259 181-95
13. Saravanan P, Raja V S and Mukherjee S 2007 Effect of plasma immersion ion implantation of nitrogen on the wear and corrosion behavior of 316LVM stainless steel Surf. Coat. Technol. 201 8131-5
14. Xu J, Ai J H, Xie X S and Xu Z 2003 Multi-element Ni-Cr-Mo-Cu surface alloyed layer on steel using a double glow plasma process Surf. Coat. Technol. 168 142-7
15. Xu J, Xie X S, Xu Z and Liu W J 2005 Investigation on multi-element Ni-Cr-Mo-Cu alloying layer by double glow plasma alloying technique Mater. Chem. Phys. 92 340-7
16. Xu J, Xie X S and Xu Z 2003 Double glow plasma surface alloying process modeling using artificial neural networks J. Mater. Sci. Technol. 19 404-6
17. Xu J, Xie X S and Xu Z 2003 Double glow surface alloying of low carbon steel with electric brush plating Ni interlayer for improvement in corrosion resistance Surf. Coat. Technol. 168 156-60
18. Chou T C 1993 Interfacial debounding by solid-state reactions of SiC with Ni and Co Scr. Metall. Mater. 29 255-60
19. Jeng S M, Yang J M and Graves J A 1993 Effect of fiber coating on the mechanical behavior of SiC fiber-reinforced titanium aluminide composites J. Mater. Res. 8 905-16
20. Stern M and Geary A L 1957 Electrochemical polarisation: I. A theoretical analysis of the shape of polarisation curves J. Electrochem. Soc. 104 56-63
21. López D, Falleiros N A and Tschiptschin A P 2007 Corrosion-erosion behaviour of austenitic and martensitic high nitrogen stainless steels Wear 263 347-54
22. Oguzie E E, Li Y and Wang F H 2007 Effect of surface nanocrystallization on corrosion inhibition of low carbon steel: synergistic effect of methionine and iodide ion Electrochim. Acta 52 6988-96
23. Zheludkevich M L, Serra R, Montemor M F, Yasakau K A, Miranda Salvado I M and Ferreira M G S 2005 Nanostructured sol-gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3: Corrosion protection performance Electrochim. Acta 51 208-17
24. Li Y X and Fedkiw P S 2007 Effect of gel electrolytes containing silica nanoparticles on aluminum corrosion Electrochim. Acta 52 2471-77
25. Macdonald J R 1987 Impedance Spectroscopy (New York: Wiley)
26. Pistorius P C and Burstein G T 1992 Metastable pitting corrosion of stainless steel and the transition to stability Phil. Trans. R. Soc. Lond. A 341 531-59
27. Zhang X, Bos C V D, Sloof W G, Hovestad A, Terryn H and Wit J H W de 2005 Comparison of the morphology and corrosion performance of Cr(VI)- and Cr(III)-based conversion coatings on zinc Surf. Coat. Technol. 199 92-104
28. Niu L and Cheng Y F 2008 Synergistic effects of fluid flow and sand particles on erosion-corrosion of aluminum in ethylene glycol-water solutions Wear 265 367-74
29. Heidemeyer J 1981 Influence of the plastic deformation of metals during mixed friction on their chemical reaction rate Wear 66 379-87
30. Deuis R L, Subramanian C and Yellup J M 1997 Abrasive wear of composite coatings in a saline slurry environment Wear 203-204 119-28
31. Wranglen G 1974 Pitting and sulphide inclusions in steel Corros. Sci. 14 331-49
32. Castle J E and Ke R 1990 Studies by Auger spectroscopy of pit initiation at the site of inclusions in stainless steel Corros. Sci. 30 409-28
33. Williams D E, Stewart J and Balkwill P H 1994 The nucleation, growth and stability of micropits in stainless steel Corros. Sci. 36 1213-35
34. Pistorius P C and Burstein G T 1992 Metastable pitting corrosion of stainless steel and the transition to stability Phil. Trans. R. Soc. Lond. A 341 531-59
35. Wharton J A, Wood R J K and Mellor B G 2003 Wavelet analysis of electrochemical noise measurements during corrosion of austenitic and superduplex stainless steels in chloride media Corros. Sci. 45 97-122
36. Lu X C, Shi K, Li S Z and Jiang X X 1999 Effects of surface deformation on corrosive wear of stainless steel in sulfuric acid solution Wear 225-229 537-43
37. Lloyd A C, Nol J J, McIntyre S and Shoesmith D W 2004 Cr, Mo and W alloying additions in Ni and their effect on passivity Electrochim. Acta 49 3015-27
38. Bermudez M D, Carrion F J, Martínez-Nicols G and López R 2005 Erosion-corrosion of stainless steels, titanium, tantalum and zirconium Wear 258 693-700
39. Apachitei I, Tichelaar F D, Duszczyk J and Katgerman L 2002 The effect of heat treatment on the structure and abrasive wear resistance of autocatalytic NiP and NiP-SiC coatings Surf. Coat. Technol. 149 263-78
40. Bratland D H, Grong, Shercliff H, Myhr O R and Tjøtta S 1997 Overview No.124 modelling of precipitation reactions in industrial processing Acta Mater. 45 1-22
41. Deschamps A and Brechet Y 1998 Influence of predeformation and ageing of an Al-Zn-Mg alloy: II. Modeling of precipitation kinetics and yield stress Acta Mater. 47 293-305