Duplex surface treatment of an AISI 316L stainless steel; microstructure and tribological behaviour

Surface and Coatings Technology

Volumn 202, Issue 13, 2008, Pages 2945-2954

  De Las Heras, E ^a   Egidi, D A ^a   Corengia, P ^a,b   Gonzalez Santamaria D ^b   Garcia Luis A ^b   Brizuela, M ^b   Lopez G A ^c   Martinez, M Flores ^d  

^a INSTITUTO NACIONAL DE TECNOLOGÍA INDUSTRIAL   (Argentina)

^b TECNALIA RESEARCH AND INNOVATION   (Spain)

^c UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

^d UNIVERSITY OF GUADALAJARA   (Mexico)

Author keywords

Austenitic stainless steel; Duplex surface treatments; Plasma nitriding; Wear

Indexed keywords

AUSTENITIC STAINLESS STEEL; CORROSION RESISTANCE; DELAMINATION; FATIGUE OF MATERIALS; NITRIDING; PHYSICAL VAPOR DEPOSITION; TRIBOLOGY; WEAR RESISTANCE;

DUPLEX SURFACE TREATMENT; PLASMA NITRIDING; ROLLING CONTACT;

SURFACE TREATMENT;

AUSTENITIC STAINLESS STEEL; CORROSION RESISTANCE; DELAMINATION; FATIGUE OF MATERIALS; NITRIDING; PHYSICAL VAPOR DEPOSITION; SURFACE TREATMENT; TRIBOLOGY; WEAR RESISTANCE;

EID: 44249099727     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2007.10.037     Document Type: Article

References (46)

1. Siva Rama Krishna D., and Sun Y. Surf. Coat. Technol. 198 (2005) 447
2. Dearnley P.A., and Aldrich-Smith G. Wear 256 (2004) 491
3. Ganesh Sundara Raman S., and Jayaprakash M. Surf. Coat. Technol. 201 (2007) 5906
4. Mukherjee S., Maitz M.F., Pham M.T., Richter E., Prokert F., and Moeller W. Surf. Coat. Technol. 196 (2005) 312
5. Hussain K., Tauqir A., ul Haq A., and Khan A.Q. Int. J. Fatigue 21 (1999) 163
6. Sun Y., Bell T., Kolosvary Z., and Flis J. Heat Treat. Met. 26 (1999) 9
7. Li C.X., and Bell T. Wear 256 (2004) 1144
8. Bordji K., Jouzeau J., Mainard D., Payan E., Delagoutte J., and Neter P. Biomaterials 17 (1996) 491
9. Fewell M.P., Priest J.M., Baldwin M.J., Collins G.A., and Shot K.T. Surf. Coat. Technol. 131 (2000) 284
10. Cheng Z., Li C.X., Dong H., and Bell T. Surf. Coat. Technol. 191 (2005) 195
11. Edenhofer B. Heat Treat. Met. 1 (1974) 23
12. Singh V., Marchev K., Cooper C.V., and Meletis E.I. Surf. Coat. Technol. 160 (2002) 249
13. Gontijo L.C., Machado R., Kuri S.E., Casteletti L.C., and Nascente P.A.P. Thin Solid Films 515 (2006) 1093
14. M.F. Martinez, Ph.D. Thesis, Universidad Nacional Autónoma de México, México, 2004.
15. Vadiraj A., and Kamaraj M. Surf. Coat. Technol. 200 (2006) 4538
16. Matthews A., Holmberg K., and Franklin S. In: Dowson D. (Ed). Thin films in tribology, Tribology series vol. 25 (1993), Elsevier, Amsterdam 429
17. Bell T., Dong H., and Sun Y. Tribol. Int. 31 (1998) 127
18. Wierzchon T. Surf. Coat. Technol. 180-181 (2003) 458
19. Dingremont N., Bergmann E., Hans M., and Collington P. Surf. Coat. Technol. 76-77 (1995) 218
20. F.M. El-Hossary, N.Z. Negm, A.M. Abd El-Rahman, M. Hammad, C. Templier, Surf. Coat. Technol. (in press).
21. Qi F., Leng Y.X., Huang N., Bai B., and Zhang P.Ch. Nucl. Instrum. Methods Phys. Res. B 257 (2007) 416
22. Cetin A., Tek Z., Oztarhan A., and Artunc N. Surf. Coat. Technol. 201 (2007) 8127
23. Rudenja S., Kulu P., Tallimets E., Mikli V., and Straede C.A. Surf. Coat. Technol. 100-101 (1998) 247
24. Rudenja S., Leygraf C., Pan J., Kulu P., Tallimets E., and Mikli V. Surf. Coat. Technol. 114 (1999) 129
25. Rahman M., Duggan P., Dowling D.P., and Hashmi M.S.J. Surf. Coat. Technol. 201 (2004) 5310
26. Xia Y., Wang S., Zhou F., Wang H., Lin Y., and Xu T. Tribol. Int. 39 (2006) 635
27. Corengia P., Ybarra G., Moina C., Cabo A., and Broitman E. Surf. Coat. Technol. 187 (2004) 63
28. Corengia P., Ybarra G., Moina C., Cabo A., and Broitman E. Surf. Coat. Technol. 200 (2005) 2391
29. De Las Heras E., González-Santamaría D., García-Luis A., Cabo A., Brizuela M., Ybarra G., Mingolo N., Brühl S., and Corengia P. Plasma Process. Polym. 4 (2007) S741
30. Cabo A., De Las Heras E., Corengia P.A., Walther F., and Brühl S. In: Gallo S., Liscic B., and Antona P.L. (Eds). Proc. 2nd Int. Conf. Heat Treatment and Surface Engineering in Automotive Applications, Associazione Italiana di Metallurgia, Milano, Italy (2005), CD publication
31. Corengia P., De Las Heras E., Brizuela M., Gonzalez D., García-Luis A., Ybarra G., and Moina C. In: Segovia J.L., and Teodoro O. (Eds). Proc. 6th Iberian Vacuum Meeting - RIVA-6 and 4th European Topical Conference on Hard Coatings - ETCHC-4 (2006), Spain 129
32. da Silva J.R.G., and McLellan R.B. Mater. Sci. Eng. 26 (1976) 83
33. Baldwin M.J., Kumar S., Priest J.M., Fewell M.P., Prince K.E., and Short K.T. Thin Solid Films 345 (1999) 108
34. Toth L.E. Transition metal carbides and nitrides (1971), Academic Press Inc, New York
35. Nagakura S., Kusunoki T., Kakimoto F., and Hirotsu Y. J. Appl. Crystallogr. 8 (1975) 65
36. Kang J.H., and Kim K.J. J. Appl. Phys. 86 (1999) 346
37. Sun Y., and Bell T. Wear 166 (1999) 119
38. Sun Y., Bell T., and Wood G. Wear 178 (1994) 131
39. Höck K., Spies H., Larisch B., Leonhardt G., and Buecken B. Surf. Coat. Technol. 88 (1996) 44
40. Kubaschewski O., and Hopkins B.F. Oxidation of metals and alloys. 2nd (1962), Butterworths, London
41. Corengia P., Walther F., Ybarra G., Sommadossi S., Corbari R., and Broitman E. Wear 260 (2006) 479
42. Bell T., and Sun Y. Surf. Eng. 6 (1990) 133
43. Rice S.L., Nowotny H., and Wayne S.F. In: Solecki R. (Ed). The role of subsurface zones in the wear of materials, Key Engineering Materials vol. 33 (1989), Trans Tech Publications, Aedermannsdorf 77
44. Tylczak J.H., and Oregon A. In: Henry S.D. (Ed). ASM Handbook, Friction, lubrication, and wear technology. 3rd Edition vol. 18 (1998), ASM International, Materials Park, OH 184
45. Czichos H. Tribology: A systems approach to the science and technology of friction, lubrication and wear (1978), Elsevier, Amsterdam, Holland 113
46. Hsu K.L., Ahn T.M., and Rigney D.A. Wear 60 (1980) 13