Operating room of the future orthopedic perspective

2008 Cairo International Biomedical Engineering Conference, CIBEC 2008

Volumn , Issue , 2008, Pages

  Mahfouz, Mohamed R ^a  

^a UNIVERSITY OF TENNESSEE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL ENGINEERING; IMPLANTS (SURGICAL); OPERATING ROOMS; REAL TIME SYSTEMS; STATE FEEDBACK; SURGERY; THREE DIMENSIONAL;

COMPUTER-ASSISTED SURGERIES; COMPUTERIZED METHODS; CUTTING PLANES; CUTTING-EDGE TECHNOLOGIES; DISRUPTIVE TECHNOLOGIES; HYPER RESOLUTIONS; IMPLANT DESIGNS; INTRA OPERATIVES; MICRO SENSORS; MINIMALLY-INVASIVE SURGERIES; PATIENT SPECIFICS; PRE-PLANNING; SURGICAL PROTOCOLS; WIRELESS NAVIGATIONS;

TECHNOLOGY;

EID: 63649118155     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/CIBEC.2008.4786072     Document Type: Conference Paper

References (35)

1. Mahfouz M. R., ElDakhakhni H. A., Abdel Fatah E. E., Tadross R., Komistek R. D., Three-Dimensional Bone Creation And Landmarking Using Two Still X-Rays. 54th Annual Meeting of Orthopaedic Research Socities, San Francisco, USA, 2008.
2. Mahfouz M. R., Booth R. E., Argenson J. N., Merkl B.C., Kuhn J. M., Abdel Fatah E. E., Utilization of Biplanar X-Ray Images in 3D Reconstruction of Patient-Specific Bones and Automatic Morphometric Measurements. 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Antibes, Cote de Azur, France, 2006.
3. Mahfouz M. R., Merkl B. C., Abdel Fatah E. E., Booth R. E., Argenson J. N., Automatic methods for characterization of sexual dimorphism of adult femora: distal femur. Computer Methods in Biomechanics and Biomedical Engineering, vol. 10, 2007, pp. 447-456.
4. Mahfouz M. R., Zhang C., Kuhn M. J., Merkl B. C., Fathy A., "Millimeter Accuracy Indoor 3D Positioning Radar Using UWB Technology," Microwave Theory and Techniques IEEE Trans, 2007.
5. Qu W., Islam S., To G., Mahfouz M. R. Design of Analog Signal Processing Integrated Circuit for Multi-Channel Biomedical Strain Measurement Instrument. Biodevices (1) 2008: 256-259
6. Gary To, M.S., Development of the Telemetrical Intraoperative Soft Tissue Tension Monitoring System in Total Knee Replacement (TKR) with MEMS and ASIC Technologies. In Department of Mechanical, Aerospace, and Biomedical Engineering. Knoxville: University of Tennessee, 2007.
7. Pritchard E., Mahfouz M. R., Evans B., Eliza S., Islam S.,. Flexible Capacitive MEMS Pressure Sensors. IEEE Sensors Conference, Lecce, Italy, 2008.
8. Evans III B., PhD, MEMS Capacitive Strain Sensing Elements for Integrated Total Knee Arthroplasty Prosthesis Monitoring. In Department of Mechanical, Aerospace, and Biomedical Engineering. Knoxville: University of Tennessee, 2007.
9. Mahfouz M., Hoff W., Komistek R., Dennis D., 2003, A robust method for registration of three-dimensional knee implant models to two-dimensional fluoroscopy images. Med. Imag., IEEE Trans., 22(12), pp. 1561-1574.
10. Mahfouz M. R., Dennis D., Komistek R. D., et al., In Vivo Determination of Hip Separation in Subjects having Either Alumina-on-Alumina or Alumina-on-Polyethylene Total Hip Arthroplasty. SICOT, San Diego, California, USA, August, 2002.
11. Kuhn M. J., Merkl B.C., Mahfouz M. R., Komistek R. D., 3D-to-2D Registration of Implant Models to X-ray Images with Special Emphasis on Error Analysis, Segmentation Effects, and Polyethylene Wear. 18th Annual Symposium of the International Society for Technology in Arthroplasty, Kyoto, Japan, 2005.
12. ElDakhakhni H., Mahfouz M. R, Abdel Fatah E. E., Pritchard E., An Automatic Calibration Method For BiPlanar 3D Reconstruction. 3rd Cairo International Biomedical Engineering Conference, Cairo, Egypt, 2006.
13. R J. Fontana, "Recent system applications of short-pulse ultra-wideband (UWB) technology," IEEE Trans. Microwave Theory and Tech., Volume 52, Issue 9, Sept. 2004, pp. 2087-2104.
14. Sapphire DART (RTLS) Product Data Sheet, Multispectral Solutions Inc., Germantown, MD, 2007, http ://www.multispectral.com/pdf/S apphire-DART.pdf
15. Hardware Datasheet, Ubisense, Cambridge, UK, 2006, http ://www.ubisense. net/SITE/UPLOAD/Document/Tech Docs/Ubisense-hardware-datasheet-May-2006.pdf
16. Low Z. N., Cheong J. H., Law C. L., Ng W. T., Lee Y. J., Pulse detection algorithm for line-of-sight (LOS) UWB ranging applications. IEEE Ant. and Wireless Prop. Letters, vol. 4, 2005, pp. 63-67.
17. Zetik R., Sachs J., Thomä R., UWB localization - active and passive approach. in Proceedings of the 21st IEEE IMTC, vol. 2, 2004, pp. 1005-1009.
18. Meier C., Terzis A., Lindenmeier S., A robust 3D high precision radio location system. in IEEE MTT-S International Microwave Symposium, 2007, pp. 397-400.
19. Zhang C., Kuhn M., Merkl B., Fathy A. E., and Mahfouz M. R., Accurate UWB indoor localization system utilizing time difference of arrival approach. in IEEE Radio and Wireless Symposium, 2006, pp. 515-518.
20. Zhang C., Kuhn M., Merkl B., Mahfouz M., and Fathy A. E., Development of an UWB indoor 3-D positioning radar with millimeter accuracy. IEEE MTT-S International Microwave Symposium, 2006, pp. 106-109.
21. Federal Communication Commission, The first report and order regarding ultra-wideband transmission systems. FCC 02-48, ET Docket No. 98-153, 2002.
22. Low Z.N., Cheong J.H., Law C.L., Ng W.T., Lee Y.J., Pulse detection algorithm for line-of-sight (LOS) UWB ranging applications. IEEE Ant. and Wireless Prop. Letters, vol. 4, 2005, pp. 63-67.
23. Zhang C., Fathy A. E., Reconfigurable pico-pulse generator for UWB applications. in IEEE MTT-S International Microwave Symposium, 2006, pp. 407-410.
24. Lee J. S. and Nguyen C., Uniplanar picosecond pulse generator using step-recovery diode. IEE Electronics Letters, vol. 37, pp. 504-506, Apr 2001.
25. Barratt D., Penney G., Chan C., Slomczykowski M., Carter T., Edwards P., and Hawkes D. Self-calibrating 3D-ultrasound-based bone registration for minimally invasive orthopedic surgery. IEEE Trans Med Imag. Mar;25(3):312-23, 2006.
26. Beasley R., Stefansic J., Herline A., Guttierez L., Galloway Jr R., Registration of Ultrasound Images. Proc. SPIE Med Imag. Vol. 3658: 125-132, 1999.
27. Brendel B., Winter S., Rick A., Stockheim M., and Ermert H., Registration of 3D CT and Ultrasound Datasets of the Spine Using Bone Structures. Comp Aided Surg. 7:146-155, 2002.
28. Brendel B., Winter S., Rick A., Stockheim M., and Emert H., Bone registration with 3D CT and Ultrasound Datasets. Intl Congress Series. 1256: 426-432, 2003.
29. Komistek R. D., Kane T. R., Mahfouz M. R., Ochoa J. A. and Dennis D. A., Knee mechanics: a review of past and present techniques to determine in vivo loads, J. Biomech., 2005, Vol. 2, 215-28.
30. Komistek R. D., Dennis D. A., Ochoa J. A, Haas B. D. and Hammill C., In vivo comparison of hip separation after metal-on-metal or metal-on-polyethylene total hip arthroplasty, J. Bone Joint Surg., 2002, Vol. 10, 1836-41.
31. Komistek R. D., Scott R. D., Dennis D. A., Yasgur D., Anderson D. T. and Hajner M. E., In vivo comparison of femorotibial contact positions for press-fit posterior stabilized and posterior cruciate-retaining total knee arthroplasties, J. Arthro., 2002, Vol. 2, 209-16.
32. Komistek R. D., Dennis D. A. and Mahfouz M. R., In vivo fluoroscopic analysis of the normal human knee. Clin. Orthop., 2003, Vol. 410, 69-81.
33. Komistek R D., Allain J., Anderson D. T., Dennis D. A. and Goutallier D., In vivo kinematics for subjects with and without an anterior cruciate ligament, Clin. Orthop., 2002, Vol. 404, 315-25.
34. Mahfouz M. R., Hoff W. A., Komistek R D. and Dennis D. A., Effect of segmentation errors on 3D-to-2D registration of implant models in X-ray images, J. Biomech., 2005, Vol. 2, 229-39.
35. Sharma, A., Komistek, R.D., Ranawat, C.S., Dennis, D.A., Mahfouz, M.R., 2007. In vivo contact pressures in total knee arthroplasty. Journal of Arthroplasty 22, 404-416.