Chemical oxygen demand fractions of municipal wastewater for modeling of wastewater treatment

International Journal of Environmental Science and Technology

Volumn 6, Issue 1, 2009, Pages 51-56

  Pasztor, I ^a   Thury, P ^a   Pulai, J ^a  

^a UNIVERSITY OF PANNONIA   (Hungary)

Author keywords

Activated sludge models; Characterization; Sewage; Simulation

Indexed keywords

BIOACTIVITY; BIOCHEMICAL OXYGEN DEMAND; COMPUTER SIMULATION; EFFLUENTS; OXYGEN; SEWAGE; WASTEWATER; WASTEWATER RECLAMATION; WATER QUALITY; WATER RECYCLING; WATER TREATMENT PLANTS;

ACTIVATED SLUDGE MODELS; AVERAGE COMPOSITIONS; CHEMICAL OXYGENS; EFFLUENT QUALITIES; HUNGARIANS; HUNGARY; MODELING PARAMETERS; MUNICIPAL WASTEWATERS; ORGANIC FRACTIONS; OXYGEN DEMANDS; RAW WASTEWATERS; REACTOR VOLUMES; RESIDENCE TIME; SIMULATION; SIMULATION-BASED DESIGNS; SLUDGE PRODUCTIONS; WASTE WATER TREATMENT PLANTS; WASTEWATER SAMPLES; WATER RESEARCHES;

WASTEWATER TREATMENT;

ACTIVATED SLUDGE; BIODEGRADATION; CHEMICAL OXYGEN DEMAND; COMPUTER SIMULATION; FRACTIONATION; WASTEWATER; WATER TREATMENT;

EID: 63449133185     PISSN: 17351472     EISSN: 17352630     Source Type: Journal    
DOI: 10.1007/BF03326059     Document Type: Article

References (33)

1. Brdjanovic, D.; Van Loosdrecht, M. C. M.; Versteeg, P.; Hooijmans, C. M; Alaerts, G. J.; Heijnen, J. J., (2000). Modeling COD, N and P removal in a full-scale WWTP Haarlem Waarderpolder., Water Res., 34 (3), 846-858.
2. Carucci, A.; Rolle, E.; Smurra, P., (1999). Management optimization of a large wastewater treatment plant., Water Sci. Tech. 39 (4), 129-136.
3. Chachaut, B; Roche, N.; Latifi, R., (2005). Long-term aeration strategies for small-size alternating activated sludge treatment plants., Chem. Eng. Prog., 44 (5), 591-604.
4. Del la Sota, A.; Larrea, L.; Novak, L.; Grau, P.; Henze, M., (1994). Performance and model calibration of R-D-N processes in pilot plant., Water Sci. Tech. 30 (6), 355-364.
5. Ekama, G. A.; Dold, P. L.; Marais, G. V. R., (1986). Procedures for determining influent COD fractions and the maximum specific growth rate of heterotrophs in activated sludge systems., Water Sci. Tech., 18 (6), 91-114.
6. EnviroSim Assiocates Ltd., (2005). BioWin 2.1. simulator - default parameters.
7. Funamizu, N.; Yamamoto, S.; Kitagawa, Y.; Takakuwa, T., (1997). Simulation of the operational conditions of the fullscale municipal wastewater treatment plant to improve the performance of nutrient removal., Water Sci. Tech. 36 (12), 9-18.
8. Gernaey, K. V.; Jorgensen, S. B., (2004). Benchmarking combined biological phosphorous and nitrogen removal wastewater treatment plant processes., Cont. Eng. Pract. 12 (3), 357- 373.
9. Henze, M., (1992). Characterization of wastewater for modelling of activated sludge processes., Water Sci. Tech., 25 (6), 1-5.
10. Henze, M.; Grady, C. P. L.; Gujer, W.; Marais, G. V. R.; Matsuo, T., (1987). Activated sludge model No. 1. IAWPRC Scientific and Technical Report 3. London: IAWPRC.
11. Henze, M.; Gujer, W.; Mino, T.; Matsuo, T.; Wentzel, M. C.; Marais, G. V. R., (1995). Activated sludge model No. 2. IAWQ Scientific and Technical Report No. 3., London: IAWQ.
12. Henze, M.; Gujer, W.; Mino, T.; Matsuo, T.; Wentzel, M. C.; Marais, G. V. R.; van Loosdrecht, M. C. M., (1999). Activated sludge model No. 2d., Water Sci. Tech. 39 (1) 165-182.
13. Henze, M., Gujer, W., Mino, T., van Loosdrecht, M., (2000). Activated sludge model No. 3. Activated sludge models ASM1, ASM2, ASM2D and ASM3, in: Henze M.; Gujer, W.; Mino, T.; Van Loosdrecht, M., (Eds.). IWA Scientific and Technical Report No. 9. London: IWA.
14. Hydromantis Ltd., (2007). GPS-X 5.0 software. General Purpose Simulator - default parameters.
15. Kappeler, J.; Gujer W., (1992). Estimation of kinetic parameters of heterotrophic biomass under aerobic conditions and characterization of wastewater for activated sludge modelling., Water Sci. Tech. 25 (6), 125-139.
16. Lesouef, A.; Payraudeau M.; Rogalla, F.; Kleiber, B., (1992). Optimizing nitrogen removal reactor configuration by onsite calibration of the IAWQ activated sludge model., Water Sci. Tech., 25 (6), 105-123.
17. Lie, E.; Welander, T., (1997). A method for determination of the readily fermentable organic fraction in municipal wastewater., Water Res., 31 (6), 1269-1274.
18. Makinia, J.; Rosenwinkel, K. H.; Spering, V., (2005). Longterm simulation of the activated sludge process at the Hanover- Grümmerward pilot WWTP., Water Res., 39 (8), 1489-1502.
19. Mamais, D.; Jenkins, D.; Pitt, P., (1993). A rapid physico-cemical method for the determination of readily biodegradable soluble COD in municipal wastewater., Water Res., 27 (1), 195-197.
20. Marquot, A.; Stricker, A. E.; Racault, Y., (2006). ASM1 dynamic calibration and long term-validation for an intermittently aerated WWTP., Water Sci. Tech. 53 (12), 247-256.
21. Melcer, H.; Dold, P. L.; Jones, R. M.; Bye, C. M.; Takacs, I.; Stensel, H. D.; Wilson, A. W.; Sun, P.; Bury, S., (2003). Methods for wastewater characterisation in activated sludge modelling. Water Environment Research Foundation (WERF), Alexandria, VA, USA.
22. Rieger, L.; Koch, G.; Khüni, M.; Gujer, W.; Siegrist, H., (2001). The EAWAG BIO-P module for activated sludge model No. 3., Water Res., 35 (16), 3887-3903.
23. Roeleveld, P. J.; Van Loosdrecht, M. C. M., (2002). Experience with guidelines for wastewater characterisation in The Netherlands., Water Sci. Tech., 45 (6), 77-87.
24. Satoh, H.; Okuda, E.; Mino, T.; Matsuo, T., (2000). Calibration of kinetic parameters in the IAWQ activated sludge model: a pilot scale experience., Water Sci. Tech., 42 (3-4), 29-34.
25. Sin, G.; Van Hulle, S. W. H.; Dirk, J. W.; Pauw, D.; Van Griensven, A.; Vanrollleghem, P. A., (2005). A critical comparison of systematic calibration protocols for activated sludge models: A SWOT analysis., Water Res., 39 (12) 2459-2474.
26. Sollfrank, U., (1988). Bedeutung organischer Fraktionen in kommunalem Abwasser im Himblick auf die mathematische modellierung von belebtschlammsystemen. Dissertation der ETH, Zürich, Schweiz, No. 8765.
27. Spanjers, H.; Vanrolleghem, P., (1995). Respirometry as tool for rapid characterization of wastewater and activated sludge., Water Sci. Tech., 31 (2), 105-114.
28. Vanrolleghem, P. A.; Insel, G.; Petersen, B.; Sin, G.; De Pauw, D.; Nopens, I.; Weijers, S.; Gearnaey, K., (2003). A comprehensive model calibration procedure for activated sludge models. In Proceedings: WEFTEC 76th. Annual Conference and Exhibition, Los Angeles, CA, USA.
29. Vanveldhuizen, H. M.; Van Loosdrecht, M. C. M.; Heijnen, J. J., (1999). Modelling Biological Phosphorous and nitrogen removal in a full scale activated sludge process., Water Res. 33 (16), 3459-3468.
30. Wichern, M.; Lübken, M.; Blömer, R.; Rosenwinkel, K. H., (2003). Efficiency of the activated sludge model No. 3 for German wastewater on six different WWTPs., Water Sci. Tech., 47 (11), 211-218.
31. Wichern, M.; Obenaus, F.; Wulf, P.; Rosenwinkel, K. H., (2001). Modelling of full-scale wastewater treatment plants with different treatment processes using the activated sludge model No. 3., Water Sci. Tech., 44 (1), 49-56.
32. Xu, S.; Hultman, B., (1996). Experiences in wastewater characterization and model calibration for the activated sludge process., Water Sci. Tech., 33 (12), 89-98.
33. Pasztor, I.; Thury, P., Pulai, J., (2008). Chemical oxygen demand fractions of municipal wastewater for modeling wastewater treatment. Int. J. Environ. Sci. Tech., 6 (1), 51-56.