Microstructure and mechanical properties of near-eutectic ZrO2-60 wt.% Al2O3 produced by quenched plasma spraying

Materials Science and Engineering: A

Volumn 506, Issue 1-2, 2009, Pages 180-186

  Suffner, J ^a   Sieger, H ^a   Hahn, H ^a,b   Dosta, S ^c   Cano, I G ^c   Guilemany, J M ^c   Klimczyk, P ^d   Jaworska, L ^d  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^b KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^c UNIVERSITY OF BARCELONA   (Spain)

^d Institute of Advanced Manufacturing Technology   (Poland)

Author keywords

Aging; Ceramics; Mechanical properties; Nanocrystalline microstructure; Plasma spraying

Indexed keywords

ALUMINUM OXIDE; BENDING STRENGTH; CORUNDUM; ELASTIC MODULI; EUTECTICS; METASTABLE PHASES; MICROSTRUCTURE; NANOCRYSTALS; PLASMA JETS; QUENCHING; X RAY DIFFRACTION; ZIRCONIA;

ATMOSPHERIC PLASMA-SPRAYING; CERAMIC; FREE STANDINGS; MICRON SCALE; MICROSTRUCTURES AND MECHANICAL PROPERTIES; NANO-STRUCTURED; NANOCRYSTALLINE MICROSTRUCTURES; NEAR-EUTECTIC COMPOSITION; PLASMA-SPRAYING; X- RAY DIFFRACTIONS;

PLASMA SPRAYING;

EID: 63149198734     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2008.11.034     Document Type: Article

References (41)

1. Herman H. MRS Bull. 13 (1988) 60
2. Geibel A., Froyen L., Delaey L., and Leuven K.U. J. Therm. Spray Technol. 5 (1996) 419
3. Damani R.J., and Lutz E.H. J. Eur. Ceram. Soc. 17 (1997) 1351
4. Neufuss K., Chráska P., Kolman B., Sampath S., and Trávnícek Z. J. Therm. Spray Technol. 6 (1997) 434
5. Devasenapathi A., Ng H.W., Yu S.C.M., and Indra A.B. Mater. Lett. 57 (2002) 882
6. Agarwal A., McKechnie T., and Seal S. J. Therm. Spray Technol. 12 (2003) 350
7. Sampath S., and Herman H. J. Therm. Spray Technol. 5 (1996) 445
8. Bianchi L., Leger A.C., Vardelle M., Vardelle A., and Fauchais P. Thin Solid Films 305 (1997) 35
9. Fauchais P., Fukumoto M., Vardelle A., and Vardelle M. J. Therm. Spray Technol. 13 (2004) 337
10. McPherson R. J. Mater. Sci. 8 (1973) 851
11. McPherson R. J. Mater. Sci. 15 (1980) 3141
12. Heintze G.N., and Uematsu S. Surf. Coat. Technol. 50 (1992) 213
13. Kim H.-J., and Kim Y.J. J. Mater. Sci. 34 (1999) 29
14. Li L., Kharas B., Zhang H., and Sampath S. Mater. Sci. Eng. A 456 (2007) 35
15. Chraska T., Neufuss K., Dubský J., Ctibor P., and Rohan P. Ceram. Int. 34 (2008) 1229
16. Kear B.H., Kalman Z., Sadangi R.K., Skandan G., Colaizzi J., and Mayo W.E. J. Therm. Spray Technol. 9 (2000) 483
17. Cano I.G., Dosta S., Miguel J.R., and Guilemany J.M. J. Mater. Sci. 42 (2007) 9331
18. Vasiliev A.L., Padture N.P., and Ma X. Acta Mater. 54 (2006) 4913
19. Srdić V.V., Winterer M., and Hahn H. J. Am. Ceram. Soc. 83 (2000) 1853
20. Hillert M. Acta Metall. 36 (1988) 3177
21. Zhou X., Shukla V., Cannon W.R., and Kear B.H. J. Am. Ceram. Soc. 86 (2003) 1415
22. Zhou X., Sadangi R.K., Kear B.H., and Cannon W.R. Mater. Sci. Forum 437-438 (2003) 407
23. Jerebtsov D.A., Mikhailov G.G., and Sverdina S.V. Ceram. Int. 26 (2000) 821
24. Roth R.S., Dennis J.R., and McMurdie H.F. Phase Diagrams for Ceramists, Vol. VI (1987), The American Ceramic Society
25. Abdel-Samad A.A., El-Bahloul A.M.M., Lugscheider E., and Rassoul S.A. J. Mater. Sci. 35 (2000) 3127
26. Yang Y.Y., Jin Y.S., and Yan T. Wear 210 (1997) 136
27. Intellectual protection properties (ipp), Legal deposit, 27/09/2007.
28. He Y.J., Winnubst L., Burggraaf A.J., Verweij H., Van der Varst P.G.T., and de With B. J. Am. Ceram. Soc. 80 (1997) 377
29. Pasaribu H.R., Reuver K.M., Schipper D.J., Ran S., Wiratha K.W., Winnubst A.J.A., and Blank D.H.A. Refrac. Metals Hard Mater. 23 (2005) 386
30. Wakui T., Malzbender J., and Steinbrech R.W. Surf. Coat. Technol. 200 (2006) 4995
31. Lima R.S., Kucuk A., and Berndt C.C. Mater. Sci. Eng. A 327 (2002) 224
32. Thompson J.A., and Clyne T.W. Acta Mater. 49 (2001) 1565
33. Kim H.-J., and Kweon Y.-G. Thin Solid Films 342 (1999) 201
34. Siemers P.A., and Mehan R.L. Ceram. Eng. Sci. Proc. 4 (1983) 828
35. Eaton H.E., and Novak R.C. Surf. Coat. Technol. 32 (1987) 227
36. McPherson R., and Shafer B.V. Thin Solid Films 97 (1982) 201
37. Duckworth W. J. Am. Ceram. Soc. 36 (1953) 68
38. Trice R.W., and Faber K.T. J. Am. Ceram. Soc. 83 (2000) 889
39. Li C.-J., and Ohmori A. J. Therm. Spray Technol. 11 (2002) 365
40. Chen H., Zhang Y., and Ding C. Wear 253 (2002) 885
41. Tao S., Liang B., Ding C., Liao H., and Coddet C. J. Therm. Spray Technol. 14 (2005) 518