Yield penetration hinge rotation in reinforced concrete beams

Journal of Structural Engineering

Volumn 135, Issue 2, 2009, Pages 130-138

  Haskett, Matthew ^a   Oehlers, Deric John ^a   Mohamed Ali, M S ^a   Wu, Chengqing ^a  

^a UNIVERSITY OF ADELAIDE   (Australia)

Author keywords

Concrete beams; Concrete slabs; Ductility; Hinges; Reinforced concrete; Rotation; Steel

Indexed keywords

BLAST LOADS; BOND CHARACTERISTICS; CONCRETE BEAM; EMPIRICAL APPROACH; PARTIAL INTERACTION; REINFORCED CONCRETE BEAMS; REINFORCED CONCRETE MEMBER; REINFORCING BAR; RESEARCH PROGRESS; ROTATION MECHANISM; STRUCTURAL ENGINEER; THREE COMPONENT;

BARS (METAL); CONCRETE BEAMS AND GIRDERS; CONCRETE BLOCKS; CONCRETE BUILDINGS; CONCRETE SLABS; DUCTILITY; REINFORCEMENT; ROTATION; SEISMIC DESIGN;

REINFORCED CONCRETE;

EID: 63149137258     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(2009)135:2(130)     Document Type: Article

References (31)

1. Baker, A. L. L. (1956). Ultimate load theory applied to the design of reinforced and prestressed concrete frames, Concrete Publications Ltd., London.
2. Barnard, P. R. (1964). " The collapse of reinforced concrete beams." Flexural mechanics of reinforced concrete, Proc., Int. Symp. 501-511.
3. Barnard, P. R., and Johnson, R. P. (1965). " Plastic behaviour of continuous composite beams." Proc.-Inst. Civ. Eng., 32 (Oct.), 161-210.
4. Chen, J. F., and Teng, J. G. (2006). " Special issue on bond behaviour of FRP in structures." Adv. Struct. Eng., 9 (6), 719-719.
5. Chen, J. F., Yuan, H., and Teng, J. G. (2007). " Debonding failure along a softening FRP-to-concrete interface between two adjacent cracks in concrete members." Eng. Struct., 29 (2), 259-270. (Pubitemid 44712615)
6. Corley, G. W. (1966). " Rotation capacity of reinforced concrete beams." ASCE J. Struct. Div., 92 (10), 121-146.
7. Debernardi, P. G., and Taliano, M. (2002). " On evaluation of rotation capacity for reinforced concrete beams." ACI Struct. J., 99 (3), 360-368.
8. Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). " Local bond stress-slip relationship of deformed bars under generalized excitations." Rep. No. UCB/EERC-83/23, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
9. Fantilli, A. P., Ferretti, D., Iori, I., and Vallini, P. (1998). " Flexural deformability of reinforced concrete beams." J. Struct. Eng., 124 (9), 1041-1049.
10. Fantilli, A. P., Ferretti, D., Iori, I., and Vallini, P. (2002). " Mechanical model for failure of compressed concrete in reinforced concrete beams." J. Struct. Eng., 128 (5), 637-645.
11. Gilbert, R. I., and Sakka, Z. I. (2007). " Effect of reinforcement type on the ductility of suspended reinforced concrete slabs." J. Struct. Eng., 133 (6), 834-843. (Pubitemid 46753510)
12. Haskett, M., Oehlers, D. J., and Mohamed Ali, M. S. (2008). " Local and global bond characteristics of steel reinforcing bars." Eng. Struct., 30 (2), 376-383. (Pubitemid 350286570)
13. Liu, I. S. T., Oehlers, D. J., and Seracino, R. (2006). " Tests on the ductility of reinforced concrete beams retrofitted with FRP and steel near-surface mounted plates." J. Compos. Constr., 10 (2), 106-114. (Pubitemid 43971691)
14. Mattock, A. H. (1967). " Discussion of rotational capacity of reinforced concrete beams by W. D. G. Corley." ASCE J. Struct. Div., 93 (2), 519-522.
15. Mohamed Ali, M. S., Oehlers, D. J., and Griffith, M. C. (2008a). " Simulation of plastic hinges in FRP plated RC beams." J. Compos. Constr., 12 (6), 617-625.
16. Mohamed Ali, M. S., Oehlers, D. J., Griffith, M. C., and Seracino, R. (2008b). " Interfacial stress transfer of near surface mounted FRP-to-concrete joints." Eng. Struct., 30 (7), 1861-1868.
17. Mohamed Ali, M. S., Oehlers, D. J., and Seracino, R. (2006). " Vertical shear interaction model between external FRP transverse plates and internal steel stirrups." Eng. Struct., 28 (3), 381-389. (Pubitemid 41824021)
18. Oehlers, D. J. (2006). " Ductility of FRP plated flexural members." Cem. Concr. Compos., 28, 898-905. (Pubitemid 44528991)
19. Oehlers, D. J., Liu, I. S. T., and Seracino, R. (2005). " The gradual formation of hinges throughout reinforced concrete beams." Mech. Based Des. Struct. Mach., 33, 375-400.
20. Oehlers, D. J., Mohammed Ali, M. S., and Griffith, M. C. (2008). " Concrete component of the rotational ductility of reinforced concrete flexural members." Adv. Struct. Eng., 11 (3), 293-303.
21. Panagiotakos, T. B., and Fardis, M. N. (2001). " Deformations of reinforced concrete members at yielding and ultimate." ACI Struct. J., 98 (2), 135-148.
22. Pochanart, S., and Harmon, T. (1989). " Bond-slip model for generalized excitations including fatigue." ACI Mater. J., 86 (5), 465-474. (Pubitemid 20608063)
23. Priestley, M. J. N., and Park, R. (1987). " Strength and ductility of concrete bridge columns under seismic loading." ACI Struct. J., 84 (1), 61-76. (Pubitemid 17553364)
24. Saatcioglu, M., Alsiwat, J. M., and Ozcebe, G. (1992). " Hysteretic behavior of anchorage slip in R/C members." J. Struct. Eng., 118 (9), 2439-2458.
25. Sawyer, H. A. (1964). " Design of concrete frames for two failure states." Proc., Int. Symp. on the Flexural Mechanics of Reinforced Concrete, ASCE-ACI, 405-431.
26. Seracino, R., Saifulnaz, R., and Oehlers, D. J. (2007). " Generic intermediate crack debonding resistance of EB and NSM plate plate-to-concrete joints." J. Compos. Constr., 11 (1), 62-72.
27. Vintzileou, E., and Stathatos, A. (2007). " Assessment of the seismic behaviour of RC columns." Eng. Struct., 29 (7), 1296-1311. (Pubitemid 46832012)
28. Viwathantepa, S., Popov, E. P., and Bertero, V. V. (1979). " Effects of generalized loadings on bond of reinforcing bars embedded in confined concrete blocks." Rep. No. UCB/EERC-79/22, Earthquake Engineering Research Center, Berkley, Calif.
29. Wood, R. H. (1968). " Some controversial and curious developments in the plastic theory of structures." Engineering plasticity, J. Heyman, and, F. A. Leckie, eds., Cambridge University Press, Cambridge, U.K., 665-691.
30. Wu, C. Q., (2007). " Blast testing of RC slabs with NSM CFRP plates." Adv. Struct. Eng., 10 (4), 397-414.
31. Wu, Y. F. (2006). " New avenue of achieving ductility for reinforced concrete members." J. Struct. Eng., 132 (9), 1502-1506.