Concrete component of the rotational ductility of reinforced concrete flexural members

Advances in Structural Engineering

Volumn 11, Issue 3, 2008, Pages 281-291

  Oehlers, Deric J ^a   Ali, M S Mohamed ^a   Griffith, Michael C ^a  

^a UNIVERSITY OF ADELAIDE   (Australia)

Author keywords

Concrete; Concrete confinement; Ductility; Hinge; Plastic hinge; Reinforced concrete; Rotational capacity; Shear friction

Indexed keywords

ABSORPTION; BUILDING MATERIALS; COMPOSITE BEAMS AND GIRDERS; CONCRETE BUILDINGS; CONCRETE CONSTRUCTION; DUCTILITY; FRICTION; IRON; PLASTICS; REINFORCED CONCRETE; SEISMIC DESIGN; SPEED; STRESSES; TRIBOLOGY;

APPLIED STRESSES; FLEXURAL MEMBERS; IMPACT ENERGIES; PLASTIC HINGING; ROTATIONAL CAPACITY; SAFE DESIGNS; SMALL REGION; STRUCTURAL ENGINEERS;

ELASTICITY;

EID: 48249156153     PISSN: 13694332     EISSN: None     Source Type: Journal    
DOI: 10.1260/136943308785082571     Document Type: Article

References (59)

1. Anderson, N.L., Daniell, J. E., Luey, L.W. and Quince, M.J. (2006). Rotational Components of RC Members, Honours Project Report, University of Adelaide.
2. Ansari, F. and Li, Q. (1998). "High-strength concrete subjected to triaxial compression", ACI Materials Journal, Vol. 95, No. 6, pp. 747-755.
3. Baker, A.L.L. (1956). Ultimate Load Theory Applied to the Design of Reinforced and Prestressed Concrete Frames, Concrete Publications Ltd., London, 91.
4. Barnard, P.R. (1964). "The collapse of reinforced concrete beams", In Flexural Mechanics of Reinforced Concrete, Proceedings of the International Symposium, Miami, Nov. 10-12, pp. 501-511.
5. Barnard, P.R. and Johnson, R.P. (1965). "Plastic behaviour of continuous composite beams", Proceedings of the Institution of Civil Engineers, Vol. 32, pp. 161-210.
6. Candappa, D.P., Sanjayan, J.G. and Setunge, S. (2001). "Complete triaxial stress-strain curves of high-strength concrete", Journal of Materials in Civil Engineering, ASCE, Vol. 13, No.3, pp. 209-215.
7. Cai, J., Zhou, J. and Fang, X.D. (2006). "Seismic ductility reduction factors for multi-degree-of-freedom systems", Advances in Structural Engineering, Vol. 9, No. 5, pp. 591-601.
8. Chen, J.F. and Teng, J.G. (2006). "Special issue on bond behaviour of FRP in structures". Advances in Structural Engineering, Vol. 9, No. 6, pp. 719-719.
9. Corley, G.W. (1966). "Rotation capacity of reinforced concrete beams", Journal of Structural Engineering, ASCE, Vol. 92, No. 10, pp. 121-146.
10. Debernardi, P.G. and Taliano, M. (2001). "Softening behaviour of concrete prisms under eccentric compressive forces", Magazine of Concrete Research, Vol. 53, No. 4, pp. 239-249.
11. Debernardi, P.G. and Taliano, M. (2002). "On evaluation of rotation capacity for reinforced concrete beams", ACI Structural Journal, Vol. 99, No. 3, pp. 360-368.
12. Duthinh, D. (1999). "Sensitivity of shear strength of reinforced concrete and prestressed concrete beams to shear friction and concrete softening according to modified compression field theory", ACI Structural Journal, Vol. 96, No. 4, pp. 496-508.
13. Esmaeily-Gh, A. and Xiao, Y. (2002). Seismic Behavior of Bridge Columns Subjected to Various Loading Patterns, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
14. Fantilli, A.P., Ferretti, D., Iori, I. and Vallini, P. (1998). "Flexural deformability of reinforced concrete beams". Journal of Structural Engineering, ASCE, Vol. 124, No. 9, pp. 1041-1049.
15. Fantilli, A.P., Ferretti, D., Iori, I. and Vallini, P. (2002). "Mechanical model for failure of compressive concrete in reinforced concrete beams", Journal of Structural Engineering, ASCE, Vol. 128, No. 5, pp. 637-645.
16. Fujita, Y., Ishimaru, R., Hanai, S. and Suenaga, Y. (1998). "Study on internal friction angle and tensile strength of plain concrete", Proceedings of Fracture Mechanics of Concrete Structures FRAMCOS 3, Aedificatio, Freiburg, Germany, pp. 325-334.
17. Gilbert, R.I. and Smith, S.T. (2006). "Strain localization and its impact on the ductility of reinforced concrete slabs containing welded wire reinforcement", Advances in Structural Engineering, Vol. 9, No. 1, pp. 117-127.
18. Griffith, M.C., Wu, Y.F. and Oehlers, D.J. (2005). "Behaviour of steel plated RC columns subject to lateral loading", Advances in Structural Engineering, Vol. 8, No. 4, pp. 333-347.
19. Hsu, T.T.C., Mau, S.T. and Chen, B. (1987). "Theory on shear transfer strength in reinforced concrete",ACI Structural Journal, Vol. 84, No. 2, pp. 149-160.
20. Imran, I. and Pantazopoulou, S.J. (1996). "Experimental study of plain concrete under triaxial stress", ACI Materials Journal, Vol. 93, No. 6, pp. 589-601.
21. Jenson, B.C. (1975). "Line of discontinuity for displacements in the theory of plasticity of plain and reinforced concrete", Magazine of Concrete Research, Vol. 27, No. 92, pp. 143-150.
22. Karbhari, V.M. and Gao, Y. (1997). "Composite jacketed concrete under uniaxial compression - verification of simple design equations", Journal of Materials in Civil Engineering, ASCE, Vol. 9, No. 4, pp. 185-193.
23. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", Journal of the Structural Division, ASCE, Vol. 97, No. 7, pp. 1969-1990.
24. Lamanna, A.J., Bank, L.C. and Borowicz, D.T. (2004). "Mechanically fastened FRP strengthening of large scale RC bridge T beams". Advances in Structural Engineering, Vol. 7, No. 6, pp. 525-538.
25. Li, G.Q. (2006). "Experimental study of FRP confined concrete cylinders", Engineering Structures, Vol. 28, No. 7, pp. 1001-1008.
26. Liu, I.S.T., Oehlers, D.J. and Seracino, R. (2006). "Moment redistribution in FRP and steel plated reinforced concrete beams", Journal of Composites for Construction, ASCE, Vol. 10, No. 2, pp. 115-124.
27. Mao, X.Y. and Xiao, Y. (2006). "Seismic behavior of confined square CFT columns", Engineering Structures, Vol. 28, No. 10, pp. 1378-1386.
28. Marefat, M.S., Khanmohammadi, M., Bahrani, M.K. and Goli, A. (2006). "Experimental assessment of reinforced concrete columns with deficient seismic details under cyclic load", Advances in Structural Engineering, Vol. 9, No. 3, pp. 337-347.
29. Mattock, A.H. (1967). "Discussion of rotational capacity of reinforced concrete beams' by W.D.G. Corley", Journal of the Structural Division, ASCE, Vol. 93, No. 2, pp. 519-522.
30. Mattock, A.H. and Hawkins, N.M. (1972). "Shear transfer in reinforced concrete recent research". Precast Concrete Institute Journal, Vol. 17, No. 2, pp. 55-75.
31. Mattock, A.H. (1974). "Shear transfer in concrete having reinforcement at an angle to the shear plane", Shear in Reinforced Concrete, ACI Special Publication SP-42, Vol.1, pp. 17-42.
32. Mattock, A.H., Mau, S.T. and Hsu, T.T. (1988). "Comments on 'Influence of concrete strength and load history on the shear friction capacity of concrete members'", PCI Journal, Vol. 33, No. 1, pp. 165-169.
33. Neale, K.W., Ebead, U.A., Baky, H.M.A., Elsayed, W.E. and Godat, A. (2006). "Analysis of the load-deformation behaviour and debonding for FRP-strengthened concrete structures". Advances in Structural Engineering, Vol. 9, No. 6, pp. 751-763.
34. Oehlers, D.J. (2006a). "Ductility of FRP plated flexural members", Cement and Concrete Composites, Vol. 28, pp. 898-905.
35. Oehlers, D.J. (2006b). "FRP plates adhesively bonded to reinforced concrete beams: generic debonding mechanisms", Advances in Structural Engineering, Vol. 9, No. 6, pp. 737-750.
36. Oehlers, D.J., Campbell, L., Haskett, M, Antram, P. and Byrne, R. (2006). "Moment redistribution in RC beams retrofitted by longitudinal plating", Advances in Structural Engineering, Vol. 9 No. 2, pp. 257-264.
37. Oehlers, DJ., M.S. Mohamed Ali, Griffith, M.C. and Ozbakkaloglu, T. (2007). "Fundamental issues that govern the rotation of FRP retrofitted RC columns and beams: the intractable plastic hinge ductility problem", Proceedings of the First Asia-Pacific Conference on FRP in Structures (APFIS 2007), December, Hong Kong, China.
38. Ozbakkaloglu, T. and Oehlers, DJ. (2007). "Concrete-filled square and rectangular FRP tubes under axial compression", Journal of Composites for Construction, ASCE, Accepted.
39. Panagiotakos, T.B. and Fardis, M.N. (2001). "Deformations of reinforced concrete members at yielding and ultimate", ACI Structural Journal, Vol. 98, No. 2, pp. 135-148.
40. Park, R. and Paulay, T. (1975). Reinforced Concrete Structures, John Wiley & Sons, New York, USA.
41. Parretti, R. and Nanni, A. (2004). "Strengthening of RC members using near-surface mounted FRP composites: Design overview", Advances in Structural Engineering, Vol. 7, No. 6, pp. 469-483.
42. Priestley, M.J.N, and Park, R. (1987). "Strength and ductility of concrete bridge columns under seismic loading", ACI Structural Journal, Vol. 84, No. 1, pp. 61-76.
43. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928). "A study of the failure of concrete under combined compressive stresses", Engineering Experiment Bulletin No. 185, Univ. of Illinois, Urbana, 111.
44. Rousakis, T.C., Karabinis, A.I. and Kiousis, P.D. (2007). "FRP-confined concrete members: Axial compression experiments and plasticity modelling", Engineering Structures, Vol. 29, No. 7, pp. 1343-1353.
45. Sawyer, H.A. (1964). "Design of concrete frames for two failure states", Proceedings of the International Symposium on the Flexural Mechanics of Reinforced Concrete, ASCE-ACI, Miami, pp. 405-431.
46. Shan, J.H., Chen, R., Zhang, W.X., Xiao, Y., Yi, W.J. and Lu, F.Y. (2007). "Behavior of concrete filled tubes and confined concrete filled tubes under high speed impact", Advances in Structural Engineering, Vol. 10, No. 2, pp. 209-218.
47. Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970). "Reinforced concrete response to simulated earthquakes", Journal of the Structural Division, ASCE, Vol. 96, No. 12, pp. 2557-2573.
48. Tao, Z., Han, L.H. and Zhuang, J.P. (2007). "Axial loading behavior of CFRP strengthened concrete-filled steel tubular stub columns", Advances in Structural Engineering, Vol. 10, No. 1, pp. 37-46.
49. Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2002). FRP Strengthened RC Structures, John Wiley & Sons, UK.
50. Teng, J.G., Huang, Y.L., Lam, L. and Ye, L.P. (2007). "Theoretical model for fibre-reinforced polymer-confined concrete", Journal of Composites for Construction, ASCE, Vol. 11, No. 2, pp. 201-210.
51. Toutanji, H.A. (1999). "Stress-strain characteristics of concrete columns externally confined with advanced fibre composite sheets", ACI Materials Journal, Vol. 96, No. 3, pp. 397-404.
52. Ueda, T., Lin, I. and Hawkins, N.M. (1986). "Beam bar anchorage in exterior column-beam connections", Journal of the American Concrete Institute, Vol. 83, No. 3, pp. 412-422.
53. Vecchio, F.J. and Lai, D. (2004). "Crack shear-slip in reinforced concrete elements", Journal of Advanced Concrete Technology,Vol. 2, No. 3, pp. 289-300.
54. Vintzileou, E., Tassios, T.P. and Chronopoulos, M. (2007). "Experimental validation of seismic code provisions for RC columns", Engineering Structures, Vol. 29, No. 6, pp. 1153-1164.
55. Walraven, J., Frenay, J. and Pruijssers, A. (1987). "Influence of concrete strength and load history on the shear friction capacity of concrete members", PCI Journal, Vol. 32, No. 1, pp. 66-84.
56. Wood, R.H. (1968). "Some controversial and curious developments in the plastic theory of structures", In Engineering Plasticity, Heyman, J., Leckie, F.A. Eds, Cambridge University Press, Cambridge, pp. 665-691.
57. Wu, Y.F., Liu, T. and Oehlers, D.J. (2006). "Fundamental principles that govern retrofitting of reinforced concrete columns by steel and FRP jacketing", Advances in Structural Engineering, Vol. 9, No. 4, pp. 507-533.
58. Wu, C.Q., Oehlers, D.J., Waschl, J., Glynn, C., Spencer, Merrigan, M. and Day, I. (2007). "Blast testing of RC slabs with NSM CFRP plates", Advances in Structural Engineering, 10(4), Aug., 397-414.
59. Zhao, J. and Sritharan, S. (2007). "Modelling of strain penetration effects in fiber based analysis of reinforced concrete structures", ACI Structural Journal, Vol. 104, No. 2, pp. 133-141.