Torsional vibration monitoring using induction machine electromagnetic torque estimation

IECON Proceedings (Industrial Electronics Conference)

Volumn , Issue , 2008, Pages 3120-3125

  Kia, Shahin Hedayati ^a   Henao, Humberto ^a   Capolino, Gérard André ^a  

^a UNIVERSITÉ DE PICARDIE JULES VERNE   (France)

Author keywords

Condition monitoring; Induction machine; Mechanical stresses; Torque estimation; Torsional vibration

Indexed keywords

ELASTIC WAVES; ELECTROMAGNETISM; ESTIMATION; GEAR MANUFACTURE; INDUSTRIAL ELECTRONICS; MACHINE VIBRATIONS; STRESSES; TORQUE;

CONTINUOUS MONITORING; DYNAMIC VARIATIONS; ELECTRICAL MACHINES; ELECTRO-MAGNETIC TORQUES; HEAVY DUTIES; INDUCTION MACHINE; MATHEMATICAL REPRESENTATIONS; MECHANICAL ANOMALIES; MECHANICAL LOADS; MECHANICAL PARTS; MECHANICAL PERFORMANCE; MECHANICAL STRESSES; NON-INVASIVE; RESIDUAL LIVES; SQUIRREL CAGES; TEST BEDS; TORQUE ESTIMATION; TORSIONAL OSCILLATIONS; TORSIONAL VIBRATION;

CONDITION MONITORING;

EID: 63149129762     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IECON.2008.4758459     Document Type: Conference Paper

References (39)

1. IAS Motor Reliability Working Group, "Report of large motor reliability survey of industrial and commercial installations - Part I," IEEE Transactions on Industry Applications, vol. IA-21, no. 4, pp. 853-864, Jul./Aug. 1985.
2. IAS Motor Reliability Working Group, "Report of large motor reliability survey of industrial and commercial installations - Part II," IEEE Transactions on Industry Applications, vol. IA-21, no. 4, pp. 865-872, Jul./Aug. 1985.
3. O.V. Thorsen, M. Dalva, "Failure identification and analysis for highvoltage induction motors in the petrochemical industry," IEEE Transactions on Industry Applications, vol. 35, no. 4, pp. 810-818, Jul./Aug. 1999.
4. J.S. Joyce, T. Kulig, D. Lambrecht, "Torsional fatigue of turbinegenerator shafts caused by different electrical system faults and switching operations," IEEE Transactions on Power Apparatus and Systems, vol. PAS-97, no. 5, pp. 1965-1977, Sept. 1978.
5. P. Pourbeik, D.G. Ramey, N. Abi-Samra, D. Brooks, A. Gaikwad, "Vulnerability of large steam turbine generators to torsional interactions during electrical grid disturbances," IEEE Transactions on Power Systems, vol. 22, no. 3, pp. 1250-1258, Aug. 2007.
6. D.N. Walker, S.L. Adams, R.J. Placek, "Torsional vibration and fatigue of turbine-generator shafts," IEEE Transactions on Power Apparatus and Systems, vol. PAS-100, no. 11, pp. 4373-4380, Nov. 1981.
7. A. H. Bonnett, "Root cause AC motor failure analysis with a focus on shaft failures," IEEE Transactions on Industry Applications, vol. 36, no. 5, pp. 1435-1448, Sept./Oct. 2000.
8. C. B. Mayer, "Torsional vibration problems and analyses of cement industry drives," IEEE Transactions on Industry Applications, vol. IA-17, no. 1, pp. 81-89, Jan./Feb. 1981.
9. J. H. Holdrege, W. Subler, W. E. Frasier, "AC induction motor torsional vibration consideration - A case study," IEEE Transactions on Industry Applications, vol. IA-19, no. 1, pp. 68-73, Jan./Feb. 1983.
10. D. J. Sheppard, "Torsional vibration resulting from adjustablefrequency AC drives," IEEE Transactions on Industry Applications, vol. 24, no. 5, pp. 812-817, Sept./Oct. 1988.
11. A. A. Shaltout, "Analysis of torsional torques in starting of large squirrel cage induction motors," IEEE Transactions on Energy Conversion, vol. 9, no. 1, pp. 135-142, March 1994.
12. R. L. Hyde, T. R. Brinner, "Starting characteristics of electric submergible oil well pumps," IEEE Transactions on Industry Applications, vol. IA-22, no. 1, pp. 133-144, Jan./Feb. 1986.
13. O. V. Thorsen, M. Dalva, "Combined electrical and mechanical model of electrical submersible pumps," IEEE Transactions on Industry Applications, vol. 37, no. 2, pp. 541-547, March/April 2001.
14. J.Stein, H. Fick, "The torsional stress analyzer for continuously monitoring turbine-generators," IEEE Transactions on Power Apparatus and Systems, vol. PAS-99, no. 2, pp. 703-710, March/April 1980.
15. M. Humer, S. Kulig, "Measurement and assessment of torsion oscillations in turbogenerators by using a torque sensor and robust observer," in Proceeding of IEEE Industrial Electronics Society Conference (IECON'03), vol. 2, pp. 1369-1377, Nov. 2003.
16. P. Wang, P. Davies, J. M. Starkey, R. L. Routson, "A torsional vibration measurement system," IEEE Transactions on Instrumentation and Measurement, vol. 41, no. 6, pp. 803-807, Dec. 1992.
17. M. S. Lebold, K. Maynard, K. Reichard, M. Trethewey, D. Bieryla, C. Lissenden, D. Dobbins, "Using torsional vibration analysis as a synergistic method for crack detection in rotating equipment," in Proceedings of the IEEE Aerospace Conference, vol. 6, 6-13 March 2004, pp. 3517-3527.
18. M. S. Lebold, K. Maynard, K. Reichard, M. Trethewey, J. Hasker, C. Lissenden, D. Dobbins, "A non-intrusive technique for on-line shaft crack detection and tracking," Proceedings of the IEEE Aerospace Conference, vol. 6, 5-12 March 2005, pp. 1-11.
19. M. Guagliano, "Fatigue failure of a bar of a twin-screw extruder for plastics," Engineering Failure Analysis, vol. 12, no. 6, pp. 950-962, Dec. 2005.
20. C. Y. Lee, W. J. Lee, Y. N. Wang, J. C. Gu, "Effects of voltage harmonics on the electrical and mechanical performances of a threephase induction motor," in Proceedings of the IEEE Industrial and Commercial Power Systems Technical Conference, 3-8 May 1998, pp. 88-94.
21. S. M. Abdulrahman, J. G. Kettleborough, I. R. Smith, "Fast calculation of harmonic torque pulsations in a VSI/induction motor drive," IEEE Transactions on Industrial Electronics, vol. 40, no. 6, pp. 561-569, Dec. 1993.
22. H. Henao, G.A. Capolino, C. Martis, M. Radulescu, "Harmonic characteristics of an induction machine connected to a distribution network," in Proceeding of IEEE Industrial Electronics Society Conference (IECON'02), vol. 2, 5-8 Nov. 2002, pp. 1008-1013.
23. G. Salles, F. Filippetti, C. Tassoni, G. Crellet, G. Franceschini, "Monitoring of induction motor load by neural network techniques," IEEE Transactions on Power Electronics, vol. 15, no. 4, pp. 762-768, July 2000.
24. M. Blödt, P. Granjon, B. Raison, G.B. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," in Proceeding of IEEE International Symposium on Industrial Electronics (ISIE'04), vol. 1, 4-7 May 2004, Ajaccio - France, pp. 383-388.
25. N.V. Kang, T.M. Cau, N.P. Dien, "Modeling parametric vibration of gear-pair systems as a tool for aiding gear fault diagnosis," Technische Mechanik Journal, vol. 24, no. 3-4, pp. 198-205, Feb. 2004 (On line at: http://www.uni-magdeburg.de/ifme/techmech/pdf/khang.pdf
26. J.H. Kuang, A.D. Lin, "Theoretical aspects of torque responses in spur gearing due to mesh stiffness variation," Mechanical Systems and Signal Processing, vol. 17, no. 2, pp. 255-271, March 2003.
27. J.S. Hsu, J.D. Kueck, M. Olszewski, D.A. Casada, P.J. Otaduy, L.M. Tolbert, "Comparison of induction motor field efficiency evaluation methods," IEEE Transactions on Industry Applications, vol. 34, no. 1, pp. 117-125, Jan.-Feb. 1998.
28. B. Lu, T.G. Habetler, R.G. Harley, "A nonintrusive and in-service motor efficiency estimation method using air-gap torque with considerations of condition monitoring," in Proeedings. of IEEE-IAS'06, Tampa Florida-USA, vol. 3, Oct. 2006, pp. 1533-1540.
29. Sh. Hedayati Kia, H. Henao, G.-A. Capolino, "Gearbox monitoring using induction machine stator current analysis," in Proc. of IEEE-SDEMPED'07, Cracow-Poland, 6-8 Sept. 2007, pp. 149-154.
30. M. Blödt, M. Chabert, J. Regnier, J. Faucher, "Mechanical load fault detection in induction motors by stator current time-frequency analysis," IEEE Transactions on Industry Applications, vol. 42, no. 6, pp. 1454-1463. Nov.-Dec. 2006.
31. W. Leonhard, Control of Electrical Drives, Springer-Verlag, New York 2001.
32. I. Takahashi, Y. Ohmori, "High-performance direct torque control of an induction motor," IEEE Transactions on Industry Applications, vol. 25, no. 2, pp. 257-264, March/April 1989.
33. J. Maes, J.A. Melkebeek, "Speed-sensorless direct torque control of induction motors using an adaptive flux observer," IEEE Transactions on Industry Applications, vol. 36, no. 3, pp. 778-785, May-June 2000.
34. H. Kubota, K. Matsuse, T. Nakano, "DSP-based speed adaptive flux observer of induction motor," IEEE Transactions on Industry Applications, vol. 29, no. 2, pp. 344-348, Mar.-Apr. 1993.
35. P. Vas, Sensorless Vector and Direct Torque Control (Monographs in Electrical and Electronic Engineering, vol. 42). London: Oxford University Press, 1998.
36. J. Holtz, "Sensorless control of induction motor drives," Proceedings of the IEEE, vol. 90, no. 8, pp. 1359-1394, Aug. 2002.
37. P.L. Jansen and R.D. Lorenz, "A physically insightful approach to the design and accuracy assessment of flux observers for field oriented induction machine drives," IEEE Transactions on Industry Applications, vol. 30, no. 1, pp. 101-110, Jan.-Feb. 1994.
38. M. Shin, D. Hyun, S. Cho, S. Choe, "An improved stator flux estimation for speed sensorless stator flux orientation control of induction motors," IEEE Transactions on Power Electronics, vol. 15, no. 5, pp. 312-318, March 2000.
39. M. Hinkkanen, J. Luomi, "Modified integrator for voltage model flux estimation of induction motors," in Proceedings of IEEE Industrial Electronics Society Conference (IECON'01), vol. 2, Nov. 2001, pp. 1339-1343.