Short note on the potential use of a rotating indenter with respect to the next generation of nanoindenters

International Journal of Surface Science and Engineering

Volumn 1, Issue 2-3, 2007, Pages 239-258

  Schwarzer, N ^a  

^a Saxonian Institute of Surface Mechanics SIO   (Germany)

Author keywords

intrinsic stress; nanoindenter; rotational loading; surface testing; thin films; Young s modulus

Indexed keywords

EID: 63149092940     PISSN: 1749785X     EISSN: 17497868     Source Type: Journal    
DOI: 10.1504/ijsurfse.2007.015027     Document Type: Article

References (24)

1. Bolshakov, A. and Pharr, G.M. (1997) ‘Inaccuracies in Sneddon’s solution for elastic indentation by a rigid cone and their implications for nanoindentation data analysis’, Mat. Res. Symp. Proc., Mat. Res. Soc., p.189.
2. Chudoba, T. (2006) ‘Measurement of hardness and Young’s modulus by nanoindentation’, in Cavaleiro, A. and de Hosson, J.T.M. (Eds.): Chapter in the Book ‘Nanostructured coatings’, Springer, New York, pp.216–260, ISBN 0-387-25642-3.
3. Chudoba, T., Griepentrog, M., Dück, A., Schneider, D. and Richter, F. (2004a) ‘Young’s modulus measurements on ultra-thin coatings’, J. Mater. Res., Vol. 19, p.301.
4. Chudoba, T., Schwarzer, N., Linss, V. and Richter, F. (2004b) ‘Determination of mechanical properties of graded coatings using nanoindentation’, Proceedings of the ICMCTF 2004 in San Diego, California, USA, also in Thin Solid Films, Vols. 469–470C, pp.239–247.
5. Fabrikant, V.I. (1989) Application of Potential Theory in Mechanics: A Selection of New Results, Kluwer Academic Publishers, The Netherlands.
6. Field, J.S. (1988) ‘Understanding the penetration resistance of modified surface layers’, Surf. Coat. Technol., Vol. 36, pp.817–827.
7. Field, J.S. and Swain, M.V. (1993) ‘A simple predictive model for spherical indentation’, J. Mater. Res., Vol. 8, No. 2, pp.297–306.
8. Hertz, H. (1896) Hertz’s Miscellaneous Papers, Chs. 5–6, Macmillan, London, UK.
9. Linss, V., Hermann, I., Schwarzer, N., Kreissig, U. and Richter, F. (2003) ‘Mechanical properties of thin films in the ternary triangle B-C-N’, Surf. Coat. Technol., Vols. 163–164, pp.220–226, ISSN 0257-8972.
10. Linss, V., Schwarzer, N., Chudoba, T., Karniychuk, M. and Richter, F. (2005) ‘Mechanical Properties of a graded BCN sputtered coating with varying Young’s modulus: deposition, theoretical modelling and nanoindentation’, Surf. Coat. Technol., Vol. 195, pp.287–297, doi:10.1016/j.surfcoat.2004.06.010.
11. Odegard, G.M., Gates, T.S. and Herring, H.M. (2005) ‘Characterisation of viscoelastic properties of polymeric materials through nanoindentation’, Experimental Mechanics, Vol. 45, No. 2, pp.130–136.
12. Oliver, W.C. and Pharr, G.M. (1992) ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments’, J. Mater. Res., Vol. 7, p.1564.
13. Pharr, G.M. and Bolshakov, B. (2002) ‘Understanding nanoindentation unloading curves’, J. Mater. Res., Vol. 17, No. 10, October, pp.2660–2671.
14. Puschmann, R., Schwarzer, N., Richter, F., Frühauf, S. and Schulz, S.E. (2005) ‘An applicable concept for the indentation of thin porous films’, in Metallkd, Z. (Ed.): Zeitschrift für Metallkunde, Proceedings of the NanoMech 5, 7–9 September 2004 in Hückelhoven, Germany, Vol. 96, No. 11, pp.1–6.
15. Schwarzer, N. (2000) ‘Arbitrary load distribution on a layered half space’, ASME Journal of Tribology, Vol. 122, No. 4, October, pp.672–681.
16. Schwarzer, N. (2004a) ‘Modelling of the mechanics of thin films using analytical linear elastic approaches’, Habilitationsschrift der TU-Chemnitz 2004, FB Physik Fester Körper, Published in the online-archive of the Technical University of Chemnitz, Available at: http://archiv.tu-chemnitz.de/pub/2004/0077.
17. Schwarzer, N. (2004b) ‘Elastic surface deformation due to indenters with arbitrary symmetry of revolution’, J. Phys. D: Appl. Phys., Vol. 37, pp.2761–2772.
18. Schwarzer, N. (2006a) ‘Effect of lateral displacement on the surface stress distribution for cone and sphere contact’, Phil. Mag. Special Issue: Instrumented Indentation Testing in Materials Research and Development, Vol. 86, Nos. 33–35, 21 November–11 December, pp.5231–237.
19. Schwarzer, N. (2006b) ‘The extended Hertzian theory and its uses in analysing indentation experiments’, Phil. Mag. Special Issue: Instrumented Indentation Testing in Materials Research and Development, Vol. 86, Nos. 33–35, 21 November–11 December, pp.5153–5767.
20. Schwarzer, N. (2006c) ‘The extended Hertzian approach for lateral loading, online archive of the technical university of Chemnitz’, in Schwarzer, N. and Geidel, L. (Eds.): Automated Analysing of Thin Film Nanoindentation Data Using the Concept of the Effectively Shaped Indenter, Proceedings of the ICMCTF, 1–5 May, San Diego, California, USA, accepted June 2006, http://archiv.tu-chemnitz.de/pub/2006/0015.
21. Schwarzer, N. (2007) Intrinsic Stresses – Their Influence on the Yield Strength and their Measurement via Nanoindentation, Online Archives of the Saxonian Institute of Surface Mechanics, www.siomec.de/pub/2007/001.
22. Schwarzer, N. and Pharr, G.M. (2004) ‘On the evaluation of stresses during nanoindentation with sharp indenters’, Proceedings of the ICMCTF, San Diego, California, USA, also in Thin Solid Films, Vols. 469–470C, pp.194–200.
23. Schwarzer, N., Chudoba, T. and Pharr, G.M. (2006a) ‘On the evaluation of stresses for coated materials during nanoindentation with sharp indenters’, Surf. Coat. Technol, Vols. 200, Nos. 14–15, pp.4220–4226, doi:10.1016/j.surfcoat.2005.01.011.
24. Schwarzer, N., Chudoba, T. and Richter, F. (2006b) ‘Investigation of ultra thin coatings using nanoindentation’, Surface and Coatings Technology, Vols. 200, Nos. 18–19, pp.5566–5580, Online at doi: http://dx.doi.org/10.1016/j.surfcoat.2005.07.075.