Pool boiling experiments on a nano-structured surface

IEEE Transactions on Components and Packaging Technologies

Volumn 32, Issue 1, 2009, Pages 156-165

  Ahn, Hee Seok ^a   Sathyamurthi, Vijaykumar ^a   Banerjee, Debjyoti ^a  

^a Texas AandM University   (United States)

Author keywords

Carbon nanotube; Cooling; Critical heat flux (CHF); Film boiling; Leidenfrost point; Multiwalled; Nucleate boiling

Indexed keywords

BOILING POINT; CARBON NANOTUBES; CHEMICAL VAPOR DEPOSITION; COOLING; EVAPORATION; HEAT FLUX; LAKES; LIQUIDS; NANOSTRUCTURES; NUCLEATE BOILING; SEMICONDUCTING SILICON COMPOUNDS; SILICON WAFERS; TABLE LOOKUP;

CRITICAL HEAT FLUX (CHF); DIFFERENT HEIGHTS; FILM BOILING; HORIZONTAL HEATERS; LEIDENFROST POINT; MULTI-WALLED CARBON NANOTUBES; MULTIWALLED; NANO-STRUCTURED SURFACES; POOL BOILING; SATURATED CONDITIONS; TEST LIQUIDS; VERTICALLY ALIGNED;

MULTIWALLED CARBON NANOTUBES (MWCN);

EID: 63049100039     PISSN: 15213331     EISSN: None     Source Type: Journal    
DOI: 10.1109/TCAPT.2009.2013980     Document Type: Article

References (26)

1. S. G. Kandlikar, M. Shoji, and V. K. Dhir, Handbook of Phase Change: Boiling and Condensation. Philadelphia, PA: Taylor and Francis, 1999.
2. C. Ramaswamy, Y. K. Joshi, W. Nakayama, and W. B. Johnson, "Combined effects of subcooling and operating pressure on the performance of a two-chamber thermo-siphon," IEEE Trans. Compon. Packag. Technol., vol. 23, no. 1, pp. 61-69, Mar. 2000.
3. C. Ramaswamy, Y. Joshi, W. Nakayama, and W. B. Johnson, "Effects of varying geometrical parameters on boiling from microfabricated enhanced structures," ASME J. Heat Transfer, vol. 125, pp. 103-109, 2003.
4. I. Mudawar and T. M. Anderson, "Optimization of enhanced surfaces for high flux chip cooling by pool boiling," Trans. ASME J. Electron. Packag., vol. 115, pp. 89-100, 1993.
5. J. Coursey, J., K. H. Roh, J. Kim, J. H., and P. J. Boudreaux, "Graphite foam thermosyphon evaporator performance: Parametric investigation of the effects of working fluid, liquid level, and chamber pressure," presented at the Proc. IMECE2002, New Orleans, LA, 2002, unpublished.
6. B. Gebhart and N. Wright, "Boiling enhancement on microconfiguredsurfaces," Int. Commun. Heat and Mass Transfer, vol. 15, pp. 141-149, 1988.
7. W. J. Miller, B. Gebhart, and N. T. Wright, "Effects of boiling history on a microconfigures surface in a dielectric liquid," Int. Commun. Heat and Mass Transfer, vol. 17, pp. 389-398, 1990.
8. H. Honda, H. Takamastu, and J. J. Wei, "Enhanced boiling of FC-72 on silicon chips with micro-pin fins and sub-micron scale roughness," ASME J. Heat Transfer, pp. 383-390, 2002.
9. M. Bahrami, M. M. Yovanovich, and J. R. Culham, "Role of random roughness on thermal performance of micro-fins," in Proc. Heat Transfer Conf., San Francisco, CA, Jul. 17-22, 2005, Paper No. HT2005-72712.
10. R. Furberg, "Enhanced boiling heat transfer from a novel nanodendritic micro-porous copper structure," Ph.D. dissertation, KTH Royal Inst. Technol., Stockholm, Sweden, 2006.
11. S. Iijima, "Helical microtubules of graphitic carbon," Nature 354 pp. 56-58, 1991.
12. S. Berber, Y. K. Kwon, and D. Tomanek, "Unusually high thermal conductivity of carbon nanotubes," Phys. Rev. Lett., vol. 84, pp. 4613-4616, 2000.
13. P. Kim, L. Shi, A. Majumdar, and P. L. McEuen, "Thermal transport measurements of individual multiwalled nanotubes," Phys. Rev. Lett. vol. 87, no. 21, pp. 215502:1-215502:4, Nov. 19, 2001.
14. O. S. Ujereh, I. Mudawar, P. B. Amama, T. S. Fisher, and W. Ou, "Enhanced pool boiling using carbon nanotube arrays on a silicon surface," in Proc. ASME-IMECE 2005, Orlando, FL, Nov. 5-11, 2005, 2005, Paper No. IMECE2005-80065.
15. H. S. Ahn, N. Sinha, M. Zhang, D. Banerjee, S. Feng, and R. Baughman, "Pool boiling experiments on multiwalled carbon nanotube (MWCNT) forests," J. Heat Transfer, vol. 128, pp. 1335-1342, Dec. 2006.
16. M. Zhang, S. Fang, A. A. Zakhidov, S. B. Lee, A. E. Aliev, C. D. Williams, K. R. Atkinson, and R. Baughman, "Strong, transparent, multifunctional, carbon nanotube sheets," Science, vol. 309, pp. 1215-1219, 2005.
17. H.-S. Ahn, N. Sinha, and D. Banerjee, "Micromachined temperature sensor arrays for studying micro-scale features in film boiling," in Proc. ASME-IMECE 2005, Orlando, FL, Nov. 5-11, 2005, Paper No. IMECE2005-81869.
18. S. Oktay, "Departure from natural convection (DNC) in low temperature boiling heat transfer encountered in cooling micro-electronic LSI devices," in Heat Transfer 1982, Proc. 7th Int. Heat Transfer Conf. Munich, Germany, 1982, vol. 4, pp. 113-118.
19. J. Y. Chang and S. M. You, "Boiling heat transfer phenomena from micro-porous and porous surfaces in saturated FC-72," Int. J. Heat and Mass Transfer, vol. 40, no. 18, pp. 4437-4447, 1997.
20. S. G. Liter and M. Kavinay, "Pool-boiling CHF enhancement by modulated porous-layer coating: Theory and experiment," Int. J. Heat and Mass Transfer, vol. 44, pp. 4287-4311, 2001.
21. G. S. Hwang and M. Kavinay, "Critical heat flux in thin, uniform particle coatings," Int. J. Heat and Mass Transfer, vol. 49, pp. 844-849, 2006.
22. K. Sefiane, "On the role of structural disjoining pressure and contact line pinning in critical heat flux enhancement during boiling of nanofluids," Appl. Phys. Lett., vol. 89, pp. 044106-1-044106-3, 2006.
23. R. F. Gaertner, "Distribution of active sites in the nucleate boiling of liquids," in Proc. Chem. Eng. Progress Symp. Ser., 1963, vol. 59, pp. 52-61.
24. D. Banerjee and V. K. Dhir, "Study of subcooled film boiling on a horizontal disc: Part 1 analysis," J. Heat Transfer, vol. 123, pp. 271-284, 2001.
25. D. Banerjee and V. K. Dhir, "Study of subcooled film boiling on a horizontal disc: Part 2 experiments," J. Heat Transfer, vol. 123, pp. 285-293, 2001.
26. D. Banerjee, G. Son, and V. K. Dhir, "Conjugate thermal and hydrodynamic analysis of saturated film boiling from a horizontal surface," ASME HTD Part 3, vol. 334, pp. 57-64, 1996.