XPS study of duplex stainless steel oxidized by oxygen atoms

Corrosion Science

Volumn 51, Issue 4, 2009, Pages 827-832

  Donik, Črtomir ^a   Kocijan, Aleksandra ^a   Grant, John T ^b   Jenko, Monika ^a   Drenik, Aleksander ^c   Pihlar, Boris ^d  

^a INSTITUTE OF METALS AND TECHNOLOGY   (Slovenia)

^b UNIVERSITY OF DAYTON   (United States)

^c JO EF STEFAN INSTITUTE   (Slovenia)

^d UNIVERSITY OF LJUBLJANA   (Slovenia)

Author keywords

A. Atomic oxidation; A. Duplex stainless steel; A. Stainless steel; B. SEM; B. XPS

Indexed keywords

ATOMS; CORROSION RESISTANT ALLOYS; EMISSION SPECTROSCOPY; FIELD EMISSION; INDUCTIVELY COUPLED PLASMA; OXIDATION; OXYGEN; SCANNING ELECTRON MICROSCOPY; STEEL METALLURGY; X RAY PHOTOELECTRON SPECTROSCOPY;

A. ATOMIC OXIDATION; A. DUPLEX STAINLESS STEEL; A. STAINLESS STEEL; B. SEM; B. XPS;

STAINLESS STEEL;

EID: 62849116878     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2009.01.021     Document Type: Article

References (48)

1. Ishikawa Y., and Yoshimura T. Importance of the surface oxide layer in the reduction of outgassing from stainless-steels. Journal of Vacuum Science & Technology a-Vacuum Surfaces and Films 13 (1995) 1847-1852
2. S. Ohkido, Y. Ishikawa, T. Yoshimura, POSAP analysis of the oxide alloy interface in stainless-steel, 1994, p. 261-65.
3. Betz G., Wehner G.K., and Toth L. Composition-vs-depth profiles obtained with auger-electron spectroscopy of air-oxidized stainless-steel surfaces. Journal of Applied Physics 45 (1974) 5312-5316
4. Mathieu H.J., and Landolt D. An investigation of thin oxide-films thermally grown insitu on Fe-24Cr and Fe-24Cr-11Mo by auger-electron spectroscopy and X-ray photoelectron-spectroscopy. Corrosion Science 26 (1986) 547-559
5. ASM specialty handbook: Stainless Steels, JR Davis, ASM International, 1996, p. 32-34.
6. J.E. Tang, M. Halvarsson, H. Asteman, J.E. Svensson, Microstructure of oxidised 304L steel and the effects of surface roughness on oxidation behaviour in R.W.I.G.K.R.C.C.M.G.A. Streiff (Ed.), 2001, p. 205-14.
7. Marasco A.L., and Young D.J. The oxidation of iron chromium manganese alloys at 900-degrees-C. Oxidation of Metals 36 (1991) 157-174
8. Vesel A., Mozetic M., Drenik A., Hauptman N., and Balat-Pichelin M. High temperature oxidation of stainless steel AISI316L in air plasma. Applied Surface Science 255 (2008) 1759-1765
9. A. Vesel, A. Drenik, M. Mozetic, A. Zalar, M. Balat-Pichelin, M. Bele, AES investigation of the stainless steel surface oxidized in plasma, 2007, p. 228-31.
10. Y. Ishikawa, K. Odaka, Reduction of outgassing from stainless surfaces by surface oxidation, 1990, p. 1995-97.
11. Kocijan A., Donik C., and Jenko M. Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions. Corrosion Science 49 (2007) 2083-2098
12. Shibagaki S., Koga A., Shirakawa Y., Onishi H., Yokokawa H., and Tanaka J. Chemical reaction path for thin film oxidation of stainless steel. Thin Solid Films 303 (1997) 101-106
13. Stokkers G.J., Vansilfhout A., Bootsma G.A., Fransen T., and Gellings P.J. Interaction of oxygen with an AISI-314 stainless-steel surface studied by ellipsometry and auger-electron spectroscopy in combination with ion-bombardment. Corrosion Science 23 (1983) 195-204
14. Mandrino D., Godec M., Torkar M., and Jenko M. Study of oxide protective layers on stainless steel by AES, EDS and XPS. Surface and Interface Analysis 40 (2008) 285-289
15. Mandrino D., Godec M., Kocijan A., Lamut M., Torkar M., and Jenko M. Oxide and nitride protective layers formed on stainless steel by thermal treatment: SEM, AES, WDS and corrosion measurements. Metalurgija 47 (2008) 119-123
16. Hultquist G., Seo M., and Sato N. Selective oxidation of FeCr alloys in the 295-450 K temperature-range. Oxidation of Metals 25 (1986) 363-372
17. Leygraf C., and Hultquist G. Initial oxidation stages on Fe-Cr(100) and Fe-Cr(110) surfaces. Surface Science 61 (1976) 69-84
18. Saeki I., Konno H., Furuichi R., Nakamura T., Mabuchi K., and Itoh M. The effect of the oxidation atmosphere on the initial oxidation of type 430 stainless steel at 1273 K. Corrosion Science 40 (1998) 191-200
19. Saeki I., Konno H., and Furuichi R. Initial oxidation of type 430 stainless steels with 0.09-0.9 Mn in O-2-N-2 atmosphere at 1273 K. Corrosion Science 38 (1996) 1595-1612
20. Baer D.R. Protective and non-protective oxide formation on 304 stainless-steel. Applied Surface Science 7 (1981) 69-82
21. Jensen C.P., Mitchell D.F., and Graham M.J. Influence of the prior oxide film on the growth and structure of oxides formed on Fe-26Cr alloys at 600-degrees-C. Corrosion Science 22 (1982) 1125-&
22. Greyling C.J., and Roux J.P. Optimum conditions in the thermal passivation of aisi-430 and aisi-304 stainless-steel in controlled oxygen atmosphere. Corrosion Science 24 (1984) 675-690
23. Huntz A.M., Reckmann A., Haut C., Severac C., Herbst M., Resende F.C.T., and Sabioni A.C.S. Oxidation of AISI 304 and AISI 439 stainless steels. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 447 (2007) 266-276
24. Poston J.A., Siriwardane R.V., Dunning J.S., Alman D.E., and Rawers J.C. X-ray photoelectron spectroscopic analysis of oxidized Fe-16Cr-16Ni-2Mn-1Mo-2Si austenitic stainless steel. Applied Surface Science 253 (2007) 4872-4885
25. Jian P., Jian L., Bing H., and Xie G.Y. Oxidation kinetics and phase evolution of a Fe-16Cr alloy in simulated SOFC cathode atmosphere. Journal of Power Sources 158 (2006) 354-360
26. Song S.H., and Xiao P. An impedance spectroscopy study of oxide films formed during high temperature oxidation of an austenitic stainless steel. Journal of Materials Science 38 (2003) 499-506
27. Perez F.J., Cristobal M.J., Arnau G., Hierro M.P., and Saura J.J. High-temperature oxidation studies of low-nickel austenitic stainless steel. Part I: Isothermal oxidation. Oxidation of Metals 55 (2001) 105-118
28. Lince J.R., Didziulis S.V., Shuh D.K., Durbin T.D., and Yarmoff J.A. Interaction of O2 with the Fe0.84Cr0.16(001) surface studied by photoelectron-spectroscopy. Surface Science 277 (1992) 43-63
29. Harrington D.A., Wieckowski A., Rosasco S.D., Schardt B.C., Salaita G.N., Hubbard A.T., and Lumsden J.B. Films formed on well-defined stainless-steel single-crystal surfaces in oxygen and water - studies of the (111) plane by LEED, AUGER and XPS. Corrosion Science 25 (1985) 849-869
30. Leygraf C., Hultquis G., Ekelund S., and Eriksson J.C. Surface composition studies of (100) and (110) faces of monocrystalline Fe84Cr16. Surface Science 46 (1974) 157-176
31. Jussila P., Lahtonen K., Lampimaki M., Hirsimaki M., and Valden M. Influence of minor alloying elements on the initial stages of oxidation of austenitic stainless steel materials. Surface and Interface Analysis 40 (2008) 1149-1156
32. Li L.F., Jiang Z.H., and Riquier Y. High-temperature oxidation of duplex stainless steels in air and mixed gas of air and CH4. Corrosion Science 47 (2005) 57-68
33. U. Cvelbar, M. Mozetic, I. Poberaj, D. Babib, A. Ricard, Characterization of hydrogen plasma with a fiber optics catalytic probe, 2005, p. 12-16.
34. U. Cvelbar, M. Mozetic, A. Ricard, Characterization of oxygen plasma with a fiber optic catalytic probe and determination of recombination coefficients, 2005, p. 834-37.
35. M. Mozetic, A. Zalar, U. Cvelbar, D. Babic, AES characterization of thin oxide films growing on Al foil during oxygen plasma treatment, 2004, p. 986-88.
36. Poberaj I., Mozetic M., and Babic D. Comparison of fiber optics and standard nickel catalytic probes for determination of neutral oxygen atoms concentration. Journal of Vacuum Science & Technology a-Vacuum Surfaces and Films 20 (2002) 189-193
37. 3 nanowires and nanobelts. Chemistry of Materials 20 (2008) 3224-3228
38. 5. Journal of Physics D-Applied Physics 40 (2007) 2300-2303
39. M. Mozetic, Characterization of reactive plasmas with catalytic probes, 2007, p. 4837-42.
40. Drenik A., Cvelbar U., Ostrikov K., and Mozetic M. Catalytic probes with nanostructured surface for gas/discharge diagnostics: a study of a probe signal behaviour. Journal of Physics D-Applied Physics 41 (2008)
41. Cvelbar U., Ostrikov K., Drenik A., and Mozetic M. Nanowire sensor response to reactive gas environment. Applied Physics Letters 92 (2008)
42. N Fairley: CasaXPS VAMAS Processing Software. http://www.casaxps.com/.
43. Milosev I., and Strehblow H.H. The behavior of stainless steels in physiological solution containing complexing agent studied by X-ray photoelectron spectroscopy. Journal of Biomedical Materials Research 52 (2000) 404-412
44. Brundle C.R., Chuang T.J., and Wandelt K. Core and valence level photoemission studies of iron-oxide surfaces and oxidation of iron. Surface Science 68 (1977) 459-468
45. Grosvenor A.P., Kobe B.A., Biesinger M.C., and McIntyre N.S. Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds. Surface and Interface Analysis 36 (2004) 1564-1574
46. Swaminathan S., and Spiegel M. Effect of alloy composition on the selective oxidation of ternary Fe-Si-Cr, Fe-Mn-Cr model alloys. Surface and Interface Analysis 40 (2008) 268-272
47. Greeff A.P., Louw C.W., and Swart H.C. The oxidation of industrial FeCrMo steel. Corrosion Science 42 (2000) 1725-1740
48. M.A.E. Jepson, R.L. Higginson, The influence of microstructure on the oxidation of duplex stainless steels in simulated propane combustion products at 1000 °C, Corros. Sci. (2009), doi:10.1016/j.corsci.2008.11.023.