Time-incremental creep-fatigue damage rule for single crystal Ni-base superalloys

Materials Science and Engineering: A

Volumn 508, Issue 1-2, 2009, Pages 200-208

  Tinga, T ^a   Brekelmans, W A M ^b   Geers, M G D ^b  

^a NETHERLANDS DEFENCE ACADEMY   (Netherlands)

^b EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Creep; Creep fatigue interaction; Damage; Fatigue; Superalloys

Indexed keywords

DISLOCATIONS (CRYSTALS); FATIGUE DAMAGE; NICKEL ALLOYS; SINGLE CRYSTALS; SUPERALLOYS;

CREEP-FATIGUE DAMAGE; CREEP-FATIGUE INTERACTIONS; DAMAGE; DAMAGE MODELLING; DAMAGE RULE; DAMAGES ACCUMULATION; OROWAN STRESS; SINGLE-CRYSTAL NI-BASE SUPERALLOYS; SLIP REVERSALS; TIME DEPENDENT;

CREEP;

EID: 62849106015     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2008.12.047     Document Type: Article

References (44)

1. Gallerneau F., and Chaboche J.L. Int. J. Damage Mech. 8 (1999) 404-427
2. Busso E.P., O'Dowd N.P., and Dennis R.J. Proceedings of the 5th IUTAM Symposium on Creep in Structures (2000), Kluwer Academic pp. 41-50
3. Zhao L.G., O'Dowd N.P., and Busso E.P. J. Mech. Phys. Solids 54 (2006) 288-309
4. Dumoulin S., Busso E.P., and O'Dowd N.P. Phil. Mag. 83 (2003) 3895-1916
5. MacLachlan D.W., and Knowles D.M. Fatigue Fract. Eng. Mater. Struct. 24 (2001) 503-521
6. In: Lecomte-Beckers J., Schubert F., and Ennis P.J. (Eds). Materials for Advanced Power Engineering 1998 (1998), Forschungszentrum Jülich
7. Basquin O.H. Proc. ASTM 10 (1910) 625-630
8. S.S. Manson, NACA TN-2933, 1954.
9. Coffin L.F. Trans. ASME 76 (1954) 931-950
10. Li S.X., and Smith D.J. Fatigue Fract. Eng. Mater. Struct. 18 (1995) 631-643
11. Shenoy M.M., Gordon A.P., McDowell D.L., and Neu R.W. J. Eng. Mater. Technol. 127 (2005) 325-336
12. Chen L., Liu Y., and Xie L. Int. J. Fatigue 29 (2007) 10-19
13. Palmgren A. Z. Ver. D. Ing. 68 (1924) 339-341
14. Miner M.A. J. Appl. Mech. 12 (1954) A159-A164
15. Moss S.J., Webster G.A., and Fleury E. Metall. Mater. Trans. A 27A (1996) 829-837
16. Robinson E.L. Trans. ASME 74 (1952) 777-781
17. Majumdar S., and Maiya P.S. J. Eng. Mater. Technol. 102 (1980) 159-167
18. M. Satoh, E. Krempl, in: Y. Yamada (Ed.), Material behaviour at elevated temperatures and components analysis, Am. Soc. Mech. Eng., pp. 71-79.
19. N.K. Arakere, G. Swanson, ASME Turbo Expo 2000, 2000.
20. Brown M.W., and Miller K.J. Proc. Inst. Mech. Eng. 187 (1973) 745-755
21. N. Yeh, E. Krempl, in: D.L. McDowell, R. Ellis (Eds.), Advances in Multiaxial Fatigue, ASTM STP 1191, American Society for Testing and Materials, Philadelphia, 1993, pp. 107-119.
22. Arakere N.K. J. Eng. Gas Turb. Power 126 (2004) 590-603
23. Levkovitch V., Sievert R., and Svendsen B. Int. J. Fatigue 28 (2006) 1791-1802
24. Levkovitch V., Sievert R., and Svendsen B. In: Portella P.D. (Ed). Proceedings of the 5th International Conference on Low Cycle Fatigue (2003), Deutscher Verband für Materialforschung und-prüfung e.V 415-420
25. Desmorat R., Kane A., Seyedi M., and Sermage J.P. Eur. J. Mech. A: Solid 26 (2007) 909-935
26. Fedelich B. Int. J. Plast. 18 (2002) 1-49
27. Tinga T., Brekelmans W.A.M., and Geers M.G.D. Phil. Mag. 88 (2008) 3793-3825
28. Reed R.C., Cox D.C., and Rae C.M.F. Mater. Sci. Eng. A 448 (2007) 88-96
29. Epishin A., Link T., Brückner U., and Portella P.D. Acta Mater. 49 (2001) 4017-4023
30. Serin K., Gobenli G., and Eggeler G. Mater. Sci. Eng. A 387-389 (2004) 133-137
31. Carry C., and Strudel J.L. Acta Metall. 26 (1978) 859-870
32. Shyam A., and Milligan W.W. Acta Mater. 53 (2005) 835-844
33. Tvergaard V., Wei Y., and Hutchinson J.W. Eur. J. Mech. A: Solid 20 (2001) 731-738
34. Repetto E.A., and Ortiz M. Acta Mater. 45 (1997) 2577-2595
35. Lukas P., and Kunz L. Mater. Sci. Eng. A 314 (2001) 75-80
36. Lukas P., and Kunz L. Int. J. Fatigue 25 (2003) 855-862
37. Lukas P., Kunz L., and Svoboda M. Int. J. Fatigue 27 (2005) 1535-1540
38. E. Chataigner, L. Remy, in: M.J. Verrilli, M.G. Castelli (Eds.), Thermomechanical Fatigue Behaviour of Materials, ASTM STP 1263, American Society for Testing and Materials, 1996, pp. 3-26.
39. Westbrooke E.F., Forero L.E., and Ebrahimi F. Acta Mater. 53 (2005) 2137-2147
40. Ghosh R.N., Curtis R.V., and McLean M. Acta Metall. Mater. 38 (1990) 1977-1992
41. Jordan E.H., Shi S., and Walker K.P. Int. J. Plast. 9 (1993) 119-139
42. Daniel R., Tinga T., and Henderson M.B. Materials for Advanced Power Engineering (2002), Forschungszentrum Jülich
43. MacLachlan D.W., Gunturi G.S.K., and Knowles D.M. Comp. Mater. Sci. 25 (2002) 129-141
44. Cailletaud G., Chaboche J.L., Forest S., and Remy L. Rev. Metall. 100 (2003) 165-172