Nanofiller loading level: Influence on selected properties of an adhesive resin

Journal of Dentistry

Volumn 37, Issue 5, 2009, Pages 331-335

  Conde, M C M ^a   Zanchi, C H ^a   Rodrigues Junior, S A ^a   Carreno N L V ^a   Ogliari, F A ^a   Piva, E ^a  

^a FEDERAL UNIVERSITY OF PELOTAS   (Brazil)

Author keywords

Cohesive strength; Degree of conversion; Dentin adhesive; Nanofiller; Weibull analysis

Indexed keywords

2 HYDROXYETHYL METHACRYLATE; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; NANOCOMPOSITE; POLYMETHACRYLIC ACID DERIVATIVE; RESIN CEMENT; SILICON DIOXIDE; TRIETHYLENE GLYCOL DIMETHACRYLATE;

ADHESION; ARTICLE; CHEMISTRY; DENTAL BONDING; DENTAL CARE; EVALUATION; HARDNESS; INFRARED SPECTROSCOPY; MATERIALS TESTING; PARTICLE SIZE; PHASE TRANSITION; SURVIVAL;

ADHESIVENESS; BISPHENOL A-GLYCIDYL METHACRYLATE; DENTAL BONDING, LIGHT-CURED; DENTAL STRESS ANALYSIS; HARDNESS; MATERIALS TESTING; METHACRYLATES; NANOCOMPOSITES; PARTICLE SIZE; PHASE TRANSITION; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SILICON DIOXIDE; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; SURVIVAL ANALYSIS;

EID: 62649157737     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2009.01.001     Document Type: Article

References (37)

1. Kemp-Scholte C.M., and Davidson C.L. Complete marginal seal of class V resin composite restorations. Journal of Dental Research 69 (1990) 1240-1243
2. Brannström M. Communication between the oral cavity and the dental pulp associated with restorative treatment. Operative Dentistry 9 (1984) 57-68
3. Sano H., Takatsu T., Ciucchi B., Russell C.M., and Pashley D.H. Tensile properties of resin-infiltrated demineralized human dentin. Journal of Dental Research 74 (1995) 1093-1102
4. Tagami J., Nakajima M., Shono T., Takatsu T., and Hosoda H. Effect of aging on dentin bonding. American Journal of Dentistry 6 (1993) 145-147
5. Hashimoto M., Ohno H., Sano H., Kaga M., and Oguchi H. Degradation patterns of different adhesives and bonding procedures. Journal of Biomedical Materials Research Part B Applied Biomaterials 66 (2003) 324-330
6. Kim H.K., Park J.H., Imai Y., and Kishi T. Microfracture mechanisms of dental resin composites containing spherically-shaped filler particles. Journal of Dental Research 73 (1994) 499-504
7. Wilson K.S., Zhang K., and Antonucci J.M. Systematic variation of interfacial phase reactivity in dental nanocomposite. Biomaterials 26 (2005) 5095-5103
8. Ferracane J.L., Berge H.X., and Condon J.R. In vitro aging of dental composites in water-effect of degree of conversion, filler volume and filler/matrix coupling. Journal of Biomedical Materials Research 42 (1998) 465-472
9. Lange F.F. The interaction of a crack front with a second-phase dispersion. Philosophical Magazine 22 (1970) 983-992
10. Ragosta G., Abbate M., and Musto P. Epoxy-silica particulate nanocomposites: chemical interactions, reinforcement and fracture toughness. Polymer 46 (2005) 10506-10516
11. Van Landuyt K.L., Snauwaert J., De Munck J., Peumans M., Yoshida Y., Poitevin A., et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 28 (2007) 3757-3785
12. Montes M.A., De Goes M.F., Cunha M.R., and Soares A.B. A morphological and tensile bond strength evaluation of an unfilled adhesive with low-viscosity composites and a filled adhesive in one and two coats. Journal of Dentistry 29 (2001) 435-441
13. Kim J.S., Cho B.H., Lee I.B., Um C.M., Lim B.S., Oh M.H., et al. Effect of the hydrophilic nanofill loading on the mechanical properties and the microtensile bond strength of an ethanol-based one-bottle dentin adhesive. Journal of Biomedical Materials Research Part B Applied Biomaterials 72B (2005) 284-291
14. McCabe J.F., and Carrick T.E. A statistical approach to the mechanical testing of dental materials. Dental Materials 2 (1986) 139-143
15. Dickens S.H., and Cho B.H. Interpretation of bond failure trough conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents. Dental Materials 21 (2005) 354-364
16. Della Bona A., Anusavice K.J., and DeHoff P.H. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures. Dental Materials 19 (2003) 662-669
17. Burrow M.F., Thomas D., Swain M.V., and Tyas M.J. Analysis of tensile bond strengths using Weibull statistics. Biomaterials 25 (2005) 5031-5035
18. Rodrigues-Junior S.A., Ferracane J.L., and Della Bona A. Flexural strength and Weibull analysis of a microhybrid and nanofill composite evaluated by 3- and 4-point bending tests. Dental Materials 24 (2008) 426-431
19. Peutzfeldt A. Quantity of remaining double bonds of propanal-containing resins. Journal of Dental Research 73 (1994) 1657-1662
20. Ferracane J.L. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dental Materials 1 (1985) 11-14
21. Halvorson R.H., Erickson R.L., and Davidson C.L. The effect of filler and silane content on conversion of resin-based composite. Dental Materials 19 (2003) 327-333
22. Ferracane J.L. Hygroscopic and hydrolytic effects in dental polymer networks. Dental Materials 22 (2006) 211-222
23. Floyd C.J., and Dickens S.H. Network structure of Bis-GMA- and UDMA-based resin systems. Dental Materials 22 (2006) 1143-1149
24. Calheiros F.C., Daronch M., Rueggeberg F.A., and Braga R.R. Degree of conversion and mechanical properties of a BisGMA:TEGDMA composite as a function of the applied radiant exposure. Journal of Biomedical Materials Research Part B Applied Biomaterials 82 (2007) 89-92
25. Ogliari F.A., de Sordi M.L.T., Ceschi M.A., Petzhold C.L., Demarco F.F., and Piva E. 2,3-Epithiopropyl methacrylate as functionalized monomer in a dental adhesive. Journal of Dentistry 34 (2006) 472-477
26. Tjong S.C. Structural and mechanical properties of polymer nanocomposites. Materials Science and Engineering Review 53 (2006) 73-197
27. Musanje L., Ferracane J.L., and Ferracane L.L. Effects of resin formulation and nanofill surface treatment on in vitro wear of experimental hybrid resin composite. Journal of Biomedical Materials Research Part B Applied Biomaterials 77 (2006) 120-125
28. Pereira S.G., Osorio R., Toledano M., and Nunes T.G. Evaluation of two Bis-GMA analogues as potential monomer diluents to improve the mechanical properties of light-cured composite resins. Dental Materials 21 (2005) 823-830
29. Asmussen E., and Peutzfeldt A. Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dental Materials 14 (1998) 51-56
30. Ogliari F.A., Ely C., Zanchi C.H., Fortes C.B.B., Samuel S.M.W., Demarco F.F., et al. Influence of chain extender length of aromatic dimethacrylates on polymer network development. Dental Materials 24 (2008) 165-171
31. Kelly J.R. Perspectives on strength. Dental Materials 11 (1995) 103-111
32. Turssi C.P., Ferracane J.L., and Vogel K. Filler features and their effect on wear and degree of conversion of particulate dental resin composites. Biomaterials 26 (2005) 4932-4937
33. Rodrigues-Junior S.A., Scherrer S.S., Ferracane J.L., and Della Bona A. Microstructural characterization and fracture behavior of a microhybrid and a nanofill composite. Dental Materials 24 (2008) 1281-1288
34. Peutzfeldt A. Resin composites in dentistry: the monomer systems. European Journal of Oral Sciences 105 (1997) 92-116
35. Lee J.H., Um C.M., and Lee I.B. Rheological properties of resin composites according to variations in monomer and filler composition. Dental Materials 22 (2006) 515-526
36. Ellakwa A., Cho N., and Lee I.B. The effect of resin matrix composition on the polymerization shrinkage and rheological properties of experimental dental composites. Dental Materials 23 (2007) 1229-1235
37. Miyazaki M., Ando S., Hinoura K., Onose H., and Moore B.K. Influence of filler addition to bonding agents on shear bond strength to bovine dentin. Dental Materials 11 (1995) 234-238