Blast loaded plates

Marine Structures

Volumn 22, Issue 2, 2009, Pages 99-127

  Rajendran, R ^a   Lee, J M ^b  

^a BHABHA ATOMIC RESEARCH CENTRE   (India)

^b Pusan National University   (South Korea)

Author keywords

Air blast; Detonation; Plate damage; Shock wave propagation; Underwater explosion

Indexed keywords

AIRCRAFT; AIRCRAFT MANUFACTURE; AIRFRAMES; DETONATION; HYDRODYNAMICS; MINE ROOF CONTROL; OFFSHORE STRUCTURES; SHOCK WAVES; UNDERWATER EXPLOSIONS; WAVE PROPAGATION;

AIR BLAST; AIRCRAFT STRUCTURES; BASIC ELEMENTS; COMBAT ENVIRONMENTS; EXPLOSIVE DEVICES; GAS EXPLOSIONS; MARINE STRUCTURES; OFFSHORE INSTALLATIONS; PLATE DAMAGE; SHOCK WAVE PROPAGATION; TERRORIST ATTACKS; WATER SURFACES;

PLATES (STRUCTURAL COMPONENTS);

BLASTING; EXPLOSIVE; LOADING; SHOCK WAVE; WAVE PROPAGATION;

EID: 61749101854     PISSN: 09518339     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.marstruc.2008.04.001     Document Type: Review

References (95)

1. Veldman R.L., Ari-Gur J., Clum C., DeYong A., and Folkert J. Effect of pre-pressurization on blast response of clamped aluminium plates. International Journal of Impact Engineering 32 10 (2006) 1678-1695
2. Fox E.N. A review of underwater explosion phenomena. Compendium of Underwater Explosion Research, ONR 1 (1947) 1-83
3. Cole R.H. Underwater explosions (1948), Dover Publications Inc., New York
4. Keshawarz M.H., and Pouretedal H.R. An empirical method for predicting detonation pressure of CHNOFCl explosives. Thermochimica Acta 414 (2004) 203-208
5. Keshawarz M.H., and Nazari H.R. A simple method to assess detonation temperature without using any experimental data and computer code. Journal of Hazardous Materials 133 1-3 (2006) 129-134
6. Keshawarz M.H. Detonation velocity of pure and mixed CHNO explosives at maximum nominal density. Journal of Hazardous Materials 141 3 (2007) 536-539
7. Keil. Introduction to underwater explosion research (1956), UERD, Norfolk Naval Shipyard, Portsmouth, Virginia
8. Alia A., and Souli M. High explosive simulation using multimaterial formulations. Applied Thermal Engineering 26 (2006) 1032-1042
9. Clutter J.K., and Stahl M. Hydrocode simulations of air and water shocks for facility vulnerability assessments. Journal of Hazardous Materials 106 1 (2004) 9-24
10. Kinnery G.F., and Graham K.J. Explosive shocks in air (1985), Springer Verlag, Berlin
11. Formby S.A., and Wharton R.K. Blast characteristics and TNT equivalence values for some commercial explosives detonated at ground level. Journal of Hazardous Materials 50 2-3 (1996) 183-198
12. Glasstone S., and Dolan P.J. Effects of nuclear weapons (1977), US Department of Defence and the Energy Research and Development Administration, Washington, DC
13. Jacinto A.C., Abrosini R.D., and Danesi R.F. Experimental and computational analysis of plates under air blast loading. International Journal of Impact Engineering 25 10 (2001) 927-947
14. Alonso F.D., Ferradas E.G., Perez S.J.F., Gimeno J.R., and Alonso J.M. Characteristic overpressure-impulse-distance curves for the detonation of explosives, pyrotechnics or unstable substances. Journal of Loss Prevention in the Process Industries 19 6 (2006) 724-728
15. Bjerketvedt D., Bakke J.R., and Wingerden K.V. Gas explosion handbook. Journal of Hazardous Materials 52 (1997) 1-150
16. Bjorno L., and Levin P. Underwater explosion research using small amount of chemical explosives. Ultrasonics (1976) 263-267
17. Luccioni B., and Ambrosini D. Blast load assessment using hydrocodes. In: Larreteguy A. (Ed). Mechanica Computational vol. XXIV (2005) 329-344 Buenos Aires, Argentina
18. Florence A.L. Circular plates under a uniformly distributed impulse. International Journal of Solids and Structures 2 1 (1966) 37-47
19. Wierzbicki T., and Florence A.L. A theoretical and experimental investigation of impulsively loaded clamped circular viscoplastic plates. International Journal of Solids and Structures 6 (1970) 553-568
20. Batra R.C., and Dube R.N. Impulsively loaded circular plates. International Journal of Solids and Structures 7 8 (1971) 965-978
21. Bodner S.R., and Symonds P.S. Experiments on viscoplastic response of circular plates to impulsive loading. Journal of Mechanics and Physics of Solids 27 2 (1979) 91-113
22. Idczak W., Rymarz C., and Spychala A. Studies on shock-wave loaded circular plates. Journal of Technical Physics 22 2 (1981) 175-184
23. Nurick G.N. A new technique to measure the deflection-time history of a structure subjected to high strain rates. International Journal of Impact Engineering 3 1 (1985) 17-26
24. Nurick G.N. Using photo voltaic diodes to measure the deformation response of a structure subjected to an explosive load, SPIE. High-speed Photography 674 (1986) 215-225
25. Nurick G.N. The measurement of deformation response of a structure subjected to an explosive load using light interference technique. Proceedings of 1986 SEM spring conference on experimental mechanics (1986), The Society of Experimental Mechanics Inc. 105-114
26. Nurick G.N., Pearce H.T., and Martin J.B. Predictions of transverse deflections and in-plane strains in impulsively loaded thin plates. International Journal of Mechanical Sciences 29 6 (1987) 435-442
27. Nurick G.N., and Martin J.B. Deformation of thin plates subjected to impulsive loading-a review. Part-I: theoretical considerations. International Journal of Impact Engineering 8 2 (1989) 159-169
28. Nurick G.N., and Martin J.B. Deformation of thin plates subjected to impulsive loading-a review. Part-II: experimental studies. International Journal of Impact Engineering 8 2 (1989) 171-186
29. Teeling-Smith R.G., and Nurick G.N. The deformation and tearing of thin circular plates subjected to impulsive loads. International Journal of Impact Engineering 11 1 (1991) 77-91
30. Olson M.D., Nurick G.N., and Fagnan J.R. Deformation and rupture of blast loaded square plates - predictions and experiments. International Journal of Impact Engineering 13 2 (1993) 279-291
31. Nurick G.N., Olson M.D., Fagnan J.R., and Levin A. Deformation and tearing of blast-loaded stiffened square plates. International Journal of Impact Engineering 16 2 (1995) 273-291
32. Nurick G.N., Gelman M.E., and Marshall N.S. Tearing of blast loaded plates with clamped boundary conditions. International Journal of Impact Engineering 7-8 (1996) 803-827
33. Worznica K., Pennetier O., and Renard J. Experimental and numerical simulations on thin metallic plates subjected to explosions. Journal of Engineering and Materials Technology 123 2 (2001) 203-209
34. Langdon G.S., Cantwell W.J., and Nurick G.N. The blast response of novel thermoplastic-based fibre-metal laminates - some preliminary results and observations. Composites Science and Technology 65 6 (2005) 861-872
35. Gupta N.K., and Nagesh. Deformation and tearing of circular plates with varying support conditions under uniform impulsive loads. International Journal of Impact Engineering 34 1 (2007) 42-59
36. Jones N. Structural impact (1989), Cambridge University Press
37. Park B.W., and Cho S.R. Simple design formulae for predicting the residual damage of unstiffened and stiffened plates under explosion loadings. International Journal of Impact Engineering 32 10 (2006) 1721-1736
38. Yuen S.C.Y., and Nurick G.N. Experimental and numerical studies on the response of quadrangular stiffened plates. Part I: subjected to uniform blast load. International Journal of Impact Engineering 31 1 (2005) 55-83
39. Schleyer G.K., Lowak M.J., Polcyn M.A., and Langdon G.S. Experimental investigation of blast wall panels under shock pressure loading. International Journal of Impact Engineering 42 6 (2007) 1095-1118
40. Stoffel M., Schmidt R., and Weichert D. Shock wave-loaded plates. International Journal of Solids and Structures 38 42-43 (2001) 7659-7680
41. Stoffel M. Sensitivity of simulations depending upon material parameter variations. Mechanics Research Communications 32 3 (2005) 332-336
42. Stoffel M. An experimental method to validate viscoplastic constitutive equations in the dynamic response of plates. Mechanics of Materials 37 12 (2005) 1210-1222
43. Stoffel M. An experimental method for measuring the buckling shapes of thin-walled structures. Thin-walled Structures 44 1 (2006) 69-73
44. Stoffel M. Shape forming of shock wave loaded viscoplastic plates. Mechanics Research Communications 33 1 (2006) 35-41
45. Shin Y.S. Ship shock modeling and simulation for far field explosion. Computers and Structures 82 23-26 (2004) 2211-2219
46. Makinen K. Cavitation models for structures excited by a plane shock wave. Journal of Fluids and Structures 12 1 (1998) 85-101
47. Makinen K. The transverse response of sandwich panels to an underwater shock wave. Journal of Fluids and Structures 13 5 (1999) 631-646
48. Liang C.C., and Tai Y.S. Shock response of a surface ship subjected to non-contact underwater explosions. Ocean Engineering 33 5-6 (2006) 748-772
49. Gong S.W., Lam K.Y., and Lu C. Structural analysis of a submarine pipeline subjected to underwater shock. International Journal of Pressure Vessels and Piping 77 7 (2000) 417-423
50. Keil A.H. The response of ships to underwater explosions. Transactions of Society of Naval Architects and Marine Engineers 69 (1961) 366-410
51. Kennard A.H. The effect of pressure wave on a plate diaphragm. Compendium of Underwater Explosion Research, ONR 3 (1944) 11-64
52. Taylor G.I. The pressure and impulse of submarine explosion waves on plates. Compendium of Underwater Explosion Research, ONR 1 (1941) 1155-1174
53. Deshpande V.S., and Fleck N.A. One-dimensional response of sandwich plates to underwater shock loading. Journal of Mechanics and Physics of Solids 53 11 (2005) 2347-2383
54. Xue Z., and Hutchinson J.W. A comparative study of impulse resistant metal sandwich plates. International Journal of Impact Engineering 30 10 (2004) 1283-1305
55. Ezra A.A. Principles and practice of explosive metal working, Part I, Industrial Newspapers Ltd. (1973), John Adams House, Adelphi, London, WC2N 6JH
56. Biggs J.M. Introduction to structural dynamics (1964), McGraw-Hill, New York
57. Clough R.W., and Penzien J. Dynamics of structures (1975), McGraw-Hill, New York
58. Rudhrapatna R.S., Vaziri R., and Olson M.D. Deformation and failure of blast loaded square plates. International Journal of Impact Engineering 22 4 (1999) 449-467
59. Rudhrapatna R.S., Vaziri R., and Olson M.D. Deformation and failure of blast loaded stiffened plates. International Journal of Impact Engineering 24 5 (2000) 457-474
60. Ma G.W., Shi H.J., and Shu D.W. P-I diagram method for combined failure modes of rigid-plastic beams. International Journal of Impact Engineering 34 6 (2007) 1081-1094
61. Baker W.R., Cox P.A., Westine P.S., Kulesz J.J., and Strehlow R.A. Explosion hazards and evaluation (1983), Elsevier Scientific Publishing Company, New York
62. Craig R.R. Structural dynamics (1981), Wiley, New York pp. 251-261
63. Schleyer G.K., Hsu S.S., White M.D., and Birch R.S. Pulse pressure loading of clamped mild steel plates. International Journal of Impact Engineering 28 2 (2003) 223-247
64. Langdon G.S., and Schleyer G.K. Inelastic deformation and failure of clamped aluminium plates under pulse pressure loading. International Journal of Impact Engineering 28 10 (2003) 1107-1127
65. Xue Z., and Hutchinson J.W. Preliminary assessment of sandwich plates subject to blast loads. International Journal of Mechanical Sciences 45 4 (2003) 687-705
66. Johnson W. Impact strength of materials (1972), Edward Arnold, London
67. Nurick G.N. An empirical solution for predicting the maximum central deflection of impulsively loaded plates. International conference on mechanical properties of materials at high rates of strain (1989), Institute of Physics Society, Oxford 457-463 No.12, Session: 9
68. Wierzbicki T. Petalling of plates under explosive and impact loading. International Journal of Impact Engineering 22 9-10 (1999) 935-954
69. Lee Y.W., and Wierzbicki T. Fracture prediction of thin plates under localized impulse loading. Part-I: dishing. International Journal of Impact Engineering 31 10 (2005) 1253-1276
70. Lee Y.W., and Wierzbicki T. Fracture prediction of thin plates under localized impulse loading. Part-II: discing and petalling. International Journal of Impact Engineering 31 10 (2005) 1277-1308
71. Wierzbicki T., and Nurick G.N. Large deformation of thin plates under localized impulse loading. International Journal of Impact Engineering 18 7-8 (1996) 899-918
72. Nurick G.N., and Radford A.M. Deformation and tearing of clamped circular plates subjected to localised central blast loads. In: Reddy B.D. (Ed). Recent developments in computational and applied mechanics, A volume in honour of J.B.Martin (1997) 276-301
73. Jacob N., Yuen C.H., Nurick G.N., Bonorchis D., Desai S.A., and Tait D. Scaling aspects of quadrangular plates subjected to localised blast loads - experiments and predictions. International Journal of Impact Engineering 30 7-8 (2004) 1179-1208
74. Hung C.F., Hsu P.Y., and Fuu J.J.H. Elastic shock response of an air-backed plate to underwater explosion. International Journal of Impact Engineering 31 2 (2005) 151-168
75. Rajendran R., and Narasimhan K. Underwater shock response of circular HSLA steel plates. Shock and Vibration 7 (2000) 251-262
76. Rajendran R., and Narasimhan K. Linear elastic shock response of plane plates subjected to underwater explosion. International Journal of Impact Engineering 25 5 (2001) 493-506
77. Rajendran R., Paik J.K., and Kim B.J. Design of warship plates against underwater explosions. Ships and Offshore Structures 1 4 (2006) 347-356
78. Rajendran R., and Narasimhan K. A shock factor based approach for the damage assessment of plane plates subjected to underwater explosions. Journal of Strain Analysis for Engineering Design 41 6 (2006) 417-425
79. Rajendran R. Response of thin HSLA steel plates to underwater explosive shock loading. Ph.D. thesis, Indian Institute of Technology, Bombay, Mumbai, India; 2001.
80. Rajendran R., and Narasimhan K. Deformation and fracture behaviour of plate specimens subjected to underwater explosion - a review. International Journal of Impact Engineering 32 12 (2006) 1945-1963
81. Rajendran R., and Narasimhan K. Performance evaluation of HSLA steel subjected to underwater explosion. Journal of Materials Engineering and Performance 10 1 (2001) 66-74
82. Rajendran R., Paik J.K., and Lee J.M. Of underwater explosion experiments on plane plates. Experimental Techniques 31 1 (2007) 18-24
83. Rajendran R., and Narasimhan K. Damage prediction of clamped circular plates subjected to contact underwater explosion. International Journal of Impact Engineering 25 4 (2001) 373-386
84. Balden V.H., and Nurick G.N. Numerical simulation of the post-failure motion of steel plates subjected to blast loading. International Journal of Impact Engineering 32 1-4 (2005) 14-34
85. Sumpter J.D.G. Design against fracture in welded joints. In: Smith C.S., and Clarke J.D. (Eds). Advances in marine structures (1986), Elsevier Applied Science Publishers 326-346
86. Porter JF. Response of SMA and narrow gap SMA weldments to explosive shock. Technical Memorandum 88/206, DREA, Atlantic, Canada; 1988.
87. Hartbower C.E., and Pellini W.S. Explosion bulge test studies on deformation of weldments. Welding Journal (1951) 307s-318s
88. Hartbower C.E., and Pellini W.S. Investigation factors which determine the performance of weldments. Welding Journal (1951) 499s-511s
89. U.S. Navy. Standard procedure for explosion bulge testing of ferrous and non-ferrous metallic materials and weldments. MIL-STD-2149A (SH); 1990.
90. Sumpter JDG. Prediction of critical crack size in plastically strained weld panels. ASTM-STP-995; 1989. p. 415-432.
91. Porter JF, Morehouse DO. Development of the DREA underwater single shot explosion bulge procedure. In Canadian fracture conference, Halifax, Nova Scotia; 1990.
92. Sumpter J.D.G. Design against fracture in welded joints. Journal of Naval Science 13 4 (1987) 258-270
93. Gifford L.N., and Dally J.W. Fracture resistance of metal structures loaded into plastic regime. In: Smith C.S., and Dow R.S. (Eds). Advances in marine structures-2 (1991), Elsevier Applied Science 23-41
94. Gifford L.N., Carlberg J.R., Wiggs A.J., and Sickles J.B. Explosive testing of full thickness pre-cracked weldments. In: Gudas J.P., Joyce J.A., and Huckett E.M. (Eds). Fracture mechanics twenty first symposium, ASTM-STP-1074 (1990), ASTM, Philadelphia 157-177
95. Pan Y., and Louca L.A. Experimental and numerical studies on the response of stiffened plates subjected to gas explosions. Journal of Constructional Steel Research 52 2 (1999) 171-193