Enhanced electrochemical activity and long-term stability of Ni-YSZ anode derived from NiO-YSZ interdispersed composite particles

Journal of the European Ceramic Society

Volumn 29, Issue 6, 2009, Pages 1119-1124

  Sato, Kazuyoshi ^a   Abe, Hiroya ^a   Misono, Teruhiko ^b   Murata, Kenji ^b   Fukui, Takehisa ^c   Naito, Makio ^a  

^a OSAKA UNIVERSITY   (Japan)

^b Hosokawa Powder Technology Research Institute   (Japan)

^c NATIONAL INSTITUTE OF ADVANCED INDUSTRIAL SCIENCE AND TECHNOLOGY AIST   (Japan)

Author keywords

Electrical properties; Fuel cells; Nanocomposites; Ni YSZ; Powders solid state reaction

Indexed keywords

COMPOSITE MATERIALS; ELECTRIC PROPERTIES; ELECTROCHEMISTRY; FUEL CELLS; NANOCOMPOSITES; NICKEL OXIDE; POWDERS; SCANNING ELECTRON MICROSCOPY; SOLID STATE REACTIONS; THREE DIMENSIONAL; TRANSMISSION ELECTRON MICROSCOPY; ZIRCONIA;

COMPOSITE PARTICLES; ELECTRICAL PROPERTIES; ELECTROCHEMICAL ACTIVITIES; ENERGY DISPERSIVE X-RAY SPECTROSCOPIES; GRAIN SIZES; HETERO-INTERFACES; LONG-TERM STABILITIES; MECHANO-CHEMICAL PROCESSING; NI-YSZ; NI-YSZ ANODES; POWDERS-SOLID STATE REACTION; SEM-EDS; SPECIFIC SURFACES; STABILIZED ZIRCONIAS; TEM;

NICKEL;

EID: 60649105535     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2008.07.050     Document Type: Article

References (23)

1. Brylewski T., Nanko M., Maruyama T., and Przybylski K. Application of Fe-16Cr ferritic alloy to interconnector for a solid oxide fuel cell. Solid State Ionics 143 (2001) 131-150
2. 2O atmosphere for SOFCs. J. Power Sources 118 (2003) 35-43
3. Zeng Z., and Natesan K. Corrosion of metallic interconnects for SOFC in fuel gases. Solid State Ionics 167 (2004) 9-16
4. Matsuzaki Y., and Yasuda I. Electrochemical properties of a SOFC cathode in contact with a chromium-containing alloy separator. Solid State Ionics 132 (2000) 271-278
5. Yokokawa H., Horita T., Sakai N., Yamaji K., Brito M.E., Xiong Y.-P., et al. Thermodynamic considerations on Cr poisoning in SOFC cathodes. Solid State Ionics 177 (2006) 3193-3198
6. Bieberle A., and Gauckler L.J. Reaction mechanism of Ni pattern anodes for solid oxide fuel cells. Solid State Ionics 135 (2000) 337-345
7. Brown M., Primdahl S., and Mogensen M. Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells. J. Electrochem. Soc. 147 (2000) A475-A485
8. Jiang S.P., Zhang S., Zhen Y.D., and Wang W. Fabrication and performance of impregnated Ni anodes of solid oxide fuel cells. J. Am. Ceram. Soc. 88 (2005) 1779-1785
9. Fukui T., Ohara S., Naito M., and Nogi K. Performance and stability of SOFC anode fabricated from NiO/YSZ composite particles. J. Eur. Ceram. Soc. 23 (2003) 2963-2967
10. Fukui T., Murata K., Ohara S., Abe H., Naito M., and Nogi K. Morphology control of Ni-YSZ cermet anode for lower temperature operation of SOFCs. J. Power Sources 125 (2004) 17-21
11. Abe H., Murata K., Fukui T., Moon W.-J., Kaneko K., and Naito M. Microstructural control of Ni-YSZ cermet anode for planer thin-film solid oxide fuel cells. Thin Solid Films 496 (2006) 49-52
12. Hagiwara A., Hobara N., Takizawa K., Sato K., Abe H., and Naito M. Preparation and evaluation of mechanochemically fabricated LSM/ScSZ composite materials for SOFC cathodes. Solid State Ionics 177 (2006) 2967-2977
13. Misono T., Murata K., Fukui T., Chaichanawong J., Sato K., Abe H., et al. Ni-SDC cermet anode fabricated from NiO-SDC composite powder for intermediate temperature SOFC. J. Power Sources 157 (2006) 754-757
14. Kim S.-D., Moon H., Hyun S.-H., Moon J., Kim J., and Lee H.-W. Nano-composite materials for high-performance and durability of solid oxide fuel cells. J. Power Sources 163 (2006) 392-397
15. Wang F.H., Guo R.S., Wei R.T., Zhou Y., Li H.L., and Li S.L. Preparation and properties of Ni/YSZ anode by coating precipitation method. Mater. Lett. 58 (2004) 3079-3083
16. Kim S.D., Moon H., Hyun S.H., Moon J., Kim J., and Lee H.W. Performance and durability of Ni-coated YSZ anodes for intermediate temperature solid oxide fuel cells. Solid State Ionics 177 (2006) 931-938
17. 2 under moderate mechanical stressing. I. A solid state acid-base reaction and charge transfer due to complex formation. J. Solid State Chem. 122 (1996) 74-80
18. Senna M., Fujiwara Y., Isobe T., and Tanaka J. Molecular dynamic-molecular orbital combined study on the solid state interfacial reaction under mechanical stressing. Solid State Ionics 141-142 (2001) 31-38
19. Weast R.C. Handbook of Chemistry and Physics. 57th ed. (1976-1977), CRC Press pp. F-219-F-225
20. Hersey J.H. Ordered mixing: a new concept in powder mixing practice. Powder Technol. 11 (1975) 41-44
21. Williford R.E., Chick L.A., Maupin G.D., Simner S.P., and Stevenson J.W. Diffusion limitations in the porous anodes of SOFCs. J. Electrochem. Soc. 150 (2003) A1067-A1072
22. Mogensen M., and Skaarup S. Kinetic and geometric aspects of solid oxide fuel cell electrodes. Solid State Ionics 86-88 (1996) 1151-1160
23. Laguna-Bercero M.A., and Larrea A. YSZ-induced crystallographic reorientation of Ni particles in Ni-YSZ cermets. J. Am. Ceram. Soc. 90 (2007) 2954-2960