Fabrication and performance of impregnated Ni anodes of solid oxide fuel cells

Journal of the American Ceramic Society

Volumn 88, Issue 7, 2005, Pages 1779-1785

  Jiang, San Ping ^a   Zhang, Sam ^a   Zhen, Yong Da ^a   Wang, Wei ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

CERIUM COMPOUNDS; DOPING (ADDITIVES); GERMANIUM; IMPREGNATION; NICKEL; OXIDATION; POLARIZATION; SOLID OXIDE FUEL CELLS; YTTRIUM COMPOUNDS; ZIRCONIA;

ELECTRODE POLARIZATION; ELECTRONIC NETWORK; HIGH TEMPERATURE SINTERING; WET IMPREGNATION;

ANODES;

EID: 27644435455     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2005.00362.x     Document Type: Article

References (47)

1. S. C. Singhal, "Advances in Solid Oxide Fuel Cell Technology," Solid State Ionics, 135, 305-13 (2000).
2. B. C. H. Steele and A. Heinzel, "Materials for Fuel-Cell Technologies," Nature, 414, 345-52 (2001).
3. C. Xia and M. Liu, "A Simple and Cost-Effective Approach to Fabrication of Dense Ceramic Membrane on Porous Substrates," J. Am. Ceram. Soc, 84, 1903-5 (2001).
4. 2 Powders on Fabrication of Anode-Supported Solid Oxide Fuel Cells," J. Power Sources, 117, 26-34 (2003).
5. S. P. Jiang and S. H. Chan, "A Review of Anode Materials Development in Solid Oxide Fuel Cells," J. Mater. Sci., 39, 4405-39 (2004).
6. W. Z. Zhu and S. C. Deevi, "A Review on the Status of Anode Materials for Solid Oxide Fuel Cells," Mater. Sci. Eng. A, 362, 228-39 (2003).
7. A. Bieberle and L. J. Gauckler, "Reaction Mechanism of Ni Pattern Anodes for Solid Oxide Fuel Cells," Solid Suite Ionics, 135, 337-45 (2000).
8. 2 Cermet Electrode of the Solid Oxide Fuel Cells," Solid State Ionics, 123/209-24 (1999).
9. M. Brown, S. Primdahl, and M. Mogensen, "Structure/Performance Relations for Ni/Yttria-Slabilized Zirconia Anodes for Solid Oxide Fuel Cells," J. Electrochem. Soc., 147, 475-85 (2000).
10. 2 Cermet Anodes for Solid Oxide Fuel Cells," Solid State Ionics, 132, 1-14 (2000).
11. T. Kawada, N. Sakai, H. Yokokawa, M. Dokiya, M. Mori, and T. Iwala, "Characteristics of Slurry-Coated Nickel Zirconia Cermet Anodes for Solid Oxide Fuel Cells," J. Electrochem. Soc., 137, 3042-7 (1990).
12. S. Primdahl, B. F. Sørensen, and M. Mogensen, "Effect of Nickel Oxide/Yttria-Stabilized Zirconia Anode Precursor Sintering Temperature on the Properties of Solid Oxide Fuel Cells," J. Am. Ceram. Soc., 83, 489-94 (2000).
13. A. Ringuedé, J. A. Labrincha, and J. R. Frade, "A Combustion Synthesis Method to Obtain Alternative Cermet Materials for SOFC Anodes," Solid State Ionics, 141-142, 549-57 (2001).
14. F. Tietz, F. J. Dias, D. Simwonis, and D. Stover, "Evaluation of Commercial Nickel Oxide Powders for Components in Solid Oxide Fuel Cells," J. Euro. Ceram. Soc., 20, 1023-34 (2000).
15. 2 Cermet Anodes for Solid Oxide Fuel Cells," Mater. Sci. Technol., 20, 1109-18.
16. 2: Cermet Anodes of Solid Oxide Fuel Cells by Ion Impregnation," J. Electrochem. Soc., 149, A1175-83 (2002).
17. C.-H. Lee, C.-H. Lee, H.-Y. Lee, and S. M. Oh, "Microstructure and Anodic Properties of Ni/YSZ Cermets in Solid Oxide Fuel Cells," Solid State Ionics, 98, 39-48 (1997).
18. B. de Boer, M. Gonzalez, H. J. M. Bouwmeester, and H. Verweij, "The Effect of The Presence of Fine YSZ Particles on the Performance of Porous Nickel Electrodes," Solid State Ionics, 127, 269-76 (2000).
19. 3-Based Cathodes for Intermediate Temperature Solid Oxide Fuel Cells," Electrochem. Solid-State Lett., 6, A67-70 (2003).
20. 3 Cathode with Highly Dispersed Pt Metal Eleelrocatalysls," Solid State Ionics, 135, 347-51 (2000).
21. S. P. Jiang and W. Wang, "Novel Structured Mixed Ionic and Electronic Conducting Cathodes of Solid Oxide Fuel Cells," Solid State Ionics, in press.
22. H. He, Y. Huang, J. Regal, M. Boaro, J. M. Vohs, and R. J. Gorte, "Low-Temperature Fabrication of Oxide Composites for Solid-Oxide Fuel Cells," J. Am. Ceram. Soc., 87, 331-6 (2004).
23. S. P. Jiang and S. P. S. Badwal, "Hydrogen Oxidation at the Nickel and Platinum Electrodes on Yttria-Tetragonal Zirconia Electrolyte," J. Electrochem. Soc., 144, 3777-84 (1997).
24. 2 Cermet Electrodes of Solid Oxide Fuel Cells," J. Mater, Sci., 38, 3775-82 (2003).
25. 2 Cermet Electrodes;" pp. 431-43 in SOFC-III, PV 93-4. Edited by S. C. Singhal and H. Iwahara. The Electrochemical Society Proceedings Series, Pennington, NJ, 1993.
26. J. B. Wang, J.-C. Jang, and T.-J. Huang, "Study of Ni-Samaria-Doped Ceria Anode for Direct Oxidation of Methane in Solid Oxide Fuel Cells," J. Power Sources, 122, 122-31 (2003).
27. 1.95 Anode for GDC Electrolyte-Based Low-Temperature SOFCs," Solid State Ionics, 166, 241-50 (2004).
28. 2 Cermet Electrodes," J. Electrochem. Soc., 150, E548-59 (2003).
29. R. Marie, S. Ohara, T. Fukui, T. Inagaki, and J.-I. Fujita, "High-Performance Ni-SDC Cermet Anode Fro Solid Oxide Fuel Cells at Medium Operating Temperature," Electrochem. Solid-State Lett., 1, 201-3 (1998).
30. Y. Yin, W. Zhu, C. Xia, and G. Meng, "Gel-Cast NiO-SDC Composites as Anodes for Solid Oxide Fuel Cells," J. Power Sources, 132, 36-41 (2004).
31. A. Bieberle, L. P. Meier, and L. J. Gauckler, "The Electrochemistry of Ni Pattern Anodes Used as Solid Oxide Fuel Cell Model Electrodes," J. Electrochem. Soc., 148, A646-56 (2001).
32. 2," Acta Phys.-Chim. Sinica, 19, 844-8 (2003).
33. 2 Oxidation on Ni/Y-TZP Cermet Electrodes - A Comparison of Electrode Behaviour by GCI and EIS Techniques," Solid State Ionics, 122, 211-22 (1999).
34. P. Holtappels, I. C. Vinke, L. G. J. de Haart, and U. Slimming, "Reaction of Hydrogen/Water Mixtures on Nickel-Zirconia CERMET Electrodes. II. AC Polarization Characteristics," J. Electrochem. Soc., 146, 2976-82 (1999).
35. J. Geyer, H. Kohlmuller, H. Landes, and R. Stubner, "Investigation into the Kinetics of the Ni-YSZ-Cermet-Anode of a Solid Oxide Fuel Cell;" pp. 585-94 in SOFC-V, PV 97-40, Edited by U. Slimming S. C. Singhal, H. Tagawa, and W. Lehnert. The Electrochemical Society, Pennington, NJ, 1997.
36. S. Primdahl and M. Mogensen, "Oxidation of Hydrogen on Ni/Yttria-Slabilized Zirconia Cermet Anodes," J. Electrochem. Soc., 144, 3409-19 (1997).
37. J. van Herle, R. Ihringer, and A. J. McEvoy, "Development of a Standard Ni-YSZ Cermet Anode for Intermediate Temperatures;" pp. 565-74 in SOFC-V, PV 97-40, Edited by S. C. Singhal and H. Tagawa. The Electrochem. Soc., Pennington. NJ, 1997.
38. X. Wang, N. Nakagawa, and K. Kato, "Anodic Polarization Related to the Ionic Conductivity of Zirconia at Ni-Zirconia Electrodes," J. Electrochem. Soc., 148, A565-9 (2001).
39. R. Cracium, S. Park, R. J. Gorte, J. M. Vohs, C. Wang, and W. L. Worrell, "A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells," J. Electrochem. Soc., 146, 4019-022 (1999).
40. T. A. Ramanarayanan and R. A. Rapp, "The Diffusivity and Solubility of Oxygen in Liquid Tin and Solid Silver and the Diffusivity of Oxygen in Solid Nickel," Metallurg. Trans., 3, 3239-46 (1972).
41. H. Yahiro, Y. Eguchi, K. Eguchi, and H. Arai, "Oxygen Ion Condvictivity of the Ceria-Samarium Oxide System with Fluorite Structure,"J. Appl. Electrochem., 18, 527-31 (1988).
42. K. Eguchi, "Ceramic Materials Containing Rare Earth Oxides for Solid Oxide Fuel Cell," J. Alloys Compounds, 250, 486-91 (1997).
43. 2," J. Electrochem. Soc., 141, 2122-34 (1994).
44. 2 SOFC-Anode;" pp. 343-50 in 5th European SOFC Forum, Edited by J. Huijsmans. European Fuel Cell Group, Lucerne, Switzerland, 2002.
45. S. P. Jiang, J. G. Love, and L. Apateanu, "Effect of Contact Between Electrode and Current Collector on the Performance of Solid Oxide Fuel Cells," Solid State Ionics, 160, 15-26 (2003).
46. M. B. Joerger and L. J. Gauekler, "Catalytic Active Anodes for SOFC;" pp. 662-70 in SOFC-VII, PV 2001-16, Edited by H. Yokokawa and S. C. Singhal. The Electrochemical Society, Pennington, NJ, 2001.
47. M. Mogensen, N. M. Sammes, and G. A. Tompsett, "Physical, Chemical and Electrochemical Properties of Pure and Doped Ceria," Solid State Ionics, 129, 63-94 (2000).