Effects of dip coating parameters on the morphology and transport properties of cellulose acetate-ceramic composite membranes

Journal of Membrane Science

Volumn 330, Issue 1-2, 2009, Pages 246-258

  Nandi, B K ^a   Uppaluri, R ^a   Purkait, M K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI   (India)

Author keywords

Cellulose acetate; Composite membrane; Dip coating; Hydraulic resistance; Phenomenological model; Resistances in series model

Indexed keywords

CELLULOSE ACETATE; DIP COATING; HYDRAULIC RESISTANCE; PHENOMENOLOGICAL MODEL; RESISTANCES IN SERIES MODEL;

ACETONE; AIR PERMEABILITY; BODY FLUIDS; CELLULOSE; CERAMIC MEMBRANES; COATINGS; COMPOSITE MEMBRANES; CONCENTRATION (PROCESS); FILM GROWTH; FILM PREPARATION; HYDRAULICS; KAOLIN; MICROFILTRATION; PERMEATION; PORE SIZE; POWDER METALLURGY; SCANNING ELECTRON MICROSCOPY; STREAM FLOW; TRANSPORT PROPERTIES; ULTRAFILTRATION;

GAS PERMEABLE MEMBRANES;

ACETIC ACID; ACETONE; BOVINE SERUM ALBUMIN; CELLULOSE ACETATE; KAOLIN;

ARTICLE; ARTIFICIAL MEMBRANE; BIOFILM; CERAMICS; COMPOSITE MATERIAL; GAS PERMEABILITY; GAS TRANSPORT; GROWTH; MEMBRANE RESISTANCE; MEMBRANE STRUCTURE; MICROFILTRATION; PERMEABILITY; POROSITY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; ULTRAFILTRATION; VISCOSITY;

ACETONE; CELLULOSE; CELLULOSE ACETATE; COATINGS; DIP COATING; MEMBRANES; METALLURGY; PERMEABILITY; RESISTANCE; SCANNING ELECTRON MICROSCOPY; ULTRAFILTRATION;

EID: 60549084315     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2008.12.071     Document Type: Article

References (25)

1. Faibish R.S., and Cohen Y. Fouling resistant ceramic supported polymer membranes for ultrafiltration of oil-in-water microemulsions. J. Membr. Sci. 185 (2001) 129
2. Matsumoto Y., Sudoh M., and Suzuki Y. Preparation of composite UF membranes of sulfonated polysulfone coated on ceramics. J. Membr. Sci. 158 (1999) 55
3. Sachdeva S., and Kumar A. Synthesis and modeling of composite poly(styrene-co-acrylonitrile) membrane for the separation of chromic acid. J. Membr. Sci. 307 (2008) 37
4. Yoshida W., and Cohen Y. Ceramic-supported polymer membranes for pervaporation of binary organic/organic mixtures. J. Membr. Sci. 213 (2003) 145
5. Song K.M., and Hong W.H. Dehydration of ethanol and isopropanol using tubular type cellulose acetate membrane with ceramic support in pervaporation process. J. Membr. Sci. 123 (1997) 27
6. Cao X., Zhang T., Nguyen Q.T., Zhang Y., and Ping Z. A novel hydrophilic polymer-ceramic composite membrane. 1. Acrylic acid grafting membrane. J. Membr. Sci. 312 (2008) 15
7. Chen Y., Xiangli F., Jin W., and Xu N. Organic-inorganic composite pervaporation membranes prepared by self-assembly of polyelectrolyte multilayers on macroporous ceramic supports. J. Membr. Sci. 302 (2007) 78
8. Ki Hong Y., and Hong W.H. Influence of ceramic support on pervaporation characteristics of IPA/water mixtures using PDMS/ceramic composite membrane. J. Membr. Sci. 159 (1999) 29
9. Xiangli F., Wei W., Chen Y., Jin W., and Xu N. Optimization of preparation conditions for polydimethylsiloxane (PDMS)/ceramic composite pervaporation membranes using response surface methodology. J. Membr. Sci. 311 (2008) 23
10. Singh N., Cherya M., and Process Design. Economic analysis of a ceramic membrane system for microfiltration of corn starch hydrolysate. J. Food Eng. 38 (1998) 57
11. Sterlitech Corporation, USA, http://www.sterlitech.com/ (May 2008).
12. Yanagishita H., Kitamoto D., Haraya K., Nakane T., Tsuchiya T., and Koura N. Preparation and pervaporation performance of polyimide composite membrane by vapor deposition and polymerization (VDP). J. Membr. Sci. 136 (1997) 121
13. Aranda P., Chen W.J., and Martin C.R. Water transport across polystyrenesulfonate/alumina composite membranes. J. Membr. Sci. 99 (1995) 185
14. Rezac M.E., and Koros W.J. Preparation of polymer-ceramic composite membranes with ultrathin defect-free separating layers. J. Appl. Polym. Sci. 46 (1992) 1927
15. Gu Y., and Meng G. A model for ceramic membrane formation by dip-coating. J. Eur. Ceram. Soc. 19 (1999) 1961
16. Babaluo A.A., Kokabi M., Manteghian M., and Sarraf-Mamoory R. A modified model for alumina membranes formed by gel-casting followed by dip-coating. J. Eur. Ceram. Soc. 24 (2004) 3779
17. Levänen E., Mäantyl T., Mikkola P., and Rosenholm J.B. Layer buildup on two-layered porous substrate by dip-coating: modeling and effect of additives on growth rate. J. Colloid Interf. Sci. 230 (2000) 186
18. Nandi B.K., Uppaluri R., and Purkait M.K. Preparation and characterization of low cost ceramic membranes for microfiltration applications. Appl. Clay Sci. 42 (2008) 102
19. Osada V., and Nakagawa I. Membrane Science and Technology (1992), Marcel Dekker Inc., New York
20. Persson K.M., Gekas V., and Trägårdh G. Study of membrane compaction and its influence on ultrafiltration water permeability. J. Membr. Sci. 100 (1995) 155
21. Brinck J., Jönsson A.S., Jönsson B., and Lindau J. Influence of pH on the adsorptive fouling of ultrafiltration membranes by fatty acid. J. Membr. Sci. 164 (2000) 187
22. Mulder M. Basic Principles of Membrane Technology (1991), Kluwer Academic Publishers, Dordrecht
23. Almandoza M.C., Marchese J., Prádanos P., Palacio L., and Hernández A. Preparation and characterization of non-supported micro-filtration membranes from aluminosilicates. J. Membr. Sci. 241 (2004) 95
24. Marchese J., and Pagliero C.L. Characterization of asymmetric polysulphone membranes for gas separation. Gas Sep. Purif. 5 (1991) 215
25. Boussu K., Vandecasteele C., and Van der Bruggen B. Study of the characteristics and the performance of self-made nanoporous polyethersulfone membranes. Polymer 47 (2006) 3464