The effect of thermomechanical processing on the microstructure and creep behavior of Udimet alloy 188

Proceedings of the International Symposium on Superalloys

Volumn , Issue , 2008, Pages 461-468

  Longanbach, S C ^a   Boehlert, C J ^a  

^a Michigan State University   (United States)

Author keywords

Cobalt based alloy; Creep; Electron backscatter diffraction; Microstructure

Indexed keywords

COBALT ALLOYS; COLD ROLLING; ELECTRON DIFFRACTION; GRAIN BOUNDARIES; METAL CLADDING; MICROSTRUCTURE; PLASTIC FLOW; SUPERALLOYS; THERMOMECHANICAL TREATMENT;

COBALT BASED ALLOY; COINCIDENT SITE LATTICE BOUNDARIES; COLD ROLLING DEFORMATION; ELECTRON BACK SCATTER DIFFRACTION; ELECTRON BACK-SCATTERED DIFFRACTION; GRAIN BOUNDARY CHARACTER DISTRIBUTIONS; LOW ENERGY GRAIN BOUNDARIES; THERMO-MECHANICAL PROCESSING;

CREEP;

EID: 60349086050     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.7449/2008/superalloys_2008_461_468     Document Type: Conference Paper

References (34)

1. C.J. Lissenden, J.F. Colaiuta, B.A. Lerch, "Hardening behavior of three metallic alloys under combined stress at elevated temperature," Acta Mech., 169 (2004), 53-77.
2. D. Zhu, D.S. Fox, and R.A. Miller, "Oxidation and creep-enhanced fatigue of Haynes 188 alloy-oxide system under simulated pulse detonation engine conditions," Ceram. Eng. Sci. Proc., 23.4 (2002), 547-553.
3. J. Chen et al., "Tensile hold low-cycle fatigue behavior of cobalt-based HAYNES® 188 superalloy," Scripta Mater., 44 (2001), 859-865.
4. 2, air, and vacuum at 1093K for periods up to 10,000 hours," J Mater. Eng. Perf., 1 (4) (1992), 469-482.
5. 2 and vacuum at 1093K," J. Mater. Eng. Perf., 3 (6) (1994), 754-762.
6. R.B. Herchenroeder et al., "Haynes alloy No. 188," Cobalt, 54 (1972), 3-13.
7. D.L. Klarstrom, "Thermomechanical processing of Haynes alloy no. 188 sheet to improve creep strength" (Paper presented at Superalloys 1980 Fourth International Symposium on Superalloys, Seven Springs Mountain Resort, Champion, PA, 21-25 September 1980) 131-140.
8. R.L. Dreshfield, "Long time creep rupture of Haynes alloy 188" (Paper presented at Eighth International Symposium on Superalloys, 22-26 September 1996), 383-389.
9. G. Palumbo, Metal alloys having improved resistance to intergranular stress corrosion cracking. U.S. Patent 5,817,193, 1998.
10. W.E. King and A.J. Schwartz, "Toward optimization of the grain boundary character distribution in OFE copper," Scripta Mater. 38 (3) (1998), 449-455.
11. E.M. Lehockey, G. Palumbo, and P. Lin, "Improving the weldability and service performance of nickel- and iron-based superalloys by grain boundary engineering," Metall. Mater. Trans. A, 29 (1998), 3069-79.
12. B. Alexandreanu, B.M. Capell, and G. Was, "Combined effect of special grain boundaries and grain boundary carbides on IGSCC," Mater. Sci. Eng, 300A (2001), 94-104.
13. E.M. Lehockey et al., "On the relationship between grain boundary character distribution and intergranular corrosion," Scripta Mater., 36 (10) (1997), 1211-18.
14. C. Cheung, U. Erb, and G. Palumbo, "Applications of grain boundary engineering concepts to alleviate intergranular cracking in alloys 600 and 690," Mater. Sci. Eng., 185A (1994), 39-43.
15. G. Palumbo and K.T. Aust, "Special Properties of Σ Grain Boundaries," Materials Interfaces: Atomic Level Structure and Properties, ed. D. Wolf and S. Yip, (New York: Chapman and Hall, 1989), 190-211.
16. G. Palumbo, E.M. Lehockey and P. Lin, "Applications for grain boundary engineered materials," J. Met., 50 (10) (1998), 40-43.
17. P. Lin et al., "Influence of grain boundary character distribution on sensitization and intergranular corrosion of alloy 600," Scripta Mater., 33 (9) (1995), 1387-1392.
18. G.S. Was, V. Thaveeprungsriporn, and D.C. Crawford, "Grain boundary misorientation effects on creep and cracking in Ni-based alloys," J. Met., 50 (2) (1998), 44-49.
19. V. Thaveeprungsriporn, and G. Was, "The role of coincidence-site- lattice boundaries in creep of Ni-16Cr9-Fe at 36°C," Metall. Mater. Trans. A, 28 (1997), 2101-2112.
20. G. Palumbo and K.T. Aust, "Structure-dependence of intergranular corrosion in high purity nickel," Acta Metall. Mater., 38 (11) (1990), 2343-2352.
21. E.M. Lehockey and G. Palumbo, "On the creep behavior of grain boundary engineered nickel," Mater. Sci. Eng., 237A (1997), 168-172.
22. V.R. Dave et al., "Grain boundary character in alloy 690 and ductility-dip cracking susceptibility," Welding Journal, 2004, American Welding Society and Welding Research Council, 1-S to 5-S.
23. C.J. Boehlert, D.S. Dickmann, and N.C. Eisinger, "The effect of sheet processing on the microstructure, tensile, creep behavior of INCONEL alloy 718," Metall. Mater. Trans. A, 37 (1) (2006), 27-40.
24. U. Krupp et al., "The effect of grain-boundary-engineering-type processing on oxygen-induced cracking of IN718," Mater. Sci. Eng, A349 (2003), 213-217.
25. U. Krupp et al., "Brittle intergranular facture of a Nibase superalloy at high temperature by dynamic embrittlement," Mater. Sci. Eng., 387-389A (2004), 409-413.
26. T. Watanabe, "An approach to grain boundary design for strong and ductile polycrystals," Res Mech., 11 (1) (1984), 47-84.
27. M. Kumar, W.E. King, and A.J. Schwartz, "Modifications in the microstructural topology in FCC materials with thermomechanical processing," Acta Mater., 48 (2000), 2081-2091.
28. C.B. Thomson, and V. Randle, "The effects of strain annealing on grain boundaries and secure triple junctions in nickel 200," J. Mater. Sci. 32 (7) (1997), 1909-1914.
29. D.G. Brandon, "The structure of high-angle grain boundaries," Acta Metall., 14 (11) (1966), 1479-1484.
30. J.E. Hilliard, Met. Prog., 78 ( 1964), 99-100.
31. Standard Test Methods for Determining Average Grain Size, ASTM Designation El 12-96e3, American Society for Testing and Materials, West Conshohocken, PA.
32. E.S. McGarrity, P.M. Duxbury, and E.A. Holm, "Statistical physics of grain-boundary engineering," Phys. Rev. E, 71 (2) (2005), Art. No. 026102 Part 2.
33. C.J. Boehlert, S.C. Longanbach, and T.R. Bieler, "The effect of thermomechanical processing on the creep behavior of Udimet alloy 188," Philos. Mag., 88 (5) (2008), 641-664.
34. C.J. Boehlert et al., "The evolution of grain-boundary cracking evaluated through in-situ tensile-creep testing of Udimet alloy 188", J. Mater. Res., 23 (2) (2008), 500-506.